AzBox HD CCcam Tutorial

CCcam module 0.2 Complete



CCcam.cfg

cccam_module

openxcas.conf

Azbox Receivers Catalog









      Contents:

        - AZBox High Definition Media Center
        - AZBox High Definition
        - AZBox SD Models for Europe
        - AZBox SD Models for America

 Lightbulb
MultiCAS
*Version 1.61C-A09 *Release date: 14/12/2009

- Add : Add Support new_biss.key file.
-> When Start MultiCAS, MultiCAS will be try to reading this file..
-> Everything can be control by user...
1) Here is how to install MultiCAS from a file you get on a forum like this one:

Start your FileZilla Client [for instance, freeware!] -> get into AZbox HD -> Plugins -> OpenXCAS -> MultiCAS -> delete all "example" files, openxcas.conf and multicas emu_module.

Put in:
-openxcas.conf
-new_bis.key
-emu_module files

from a file one gets from a forum like this one.

Give emu_module CHMOD to 755 by right clicking on it -> File Permissions -> Change file attributes -> numeric value to 755 -> OK.

Reboot.

The right version should be showing in AZbox HD MultiCAS menu. All CCcam and Newcamd servers should be preserved, if you put them in before!

Server details are in MultiCAS in /tmp file: ccc_serverstatus.info

=======================================

2) It is possible to install and configure it all out via remote, if the file is available to download from azboxworld, straight into your AZbox HD:

First, stop all other emus and activate ONLY MultiCAS [the # thing, using the blue button on your remote, as you may have read in my "Alternative Guide", where you will get a lot more info on many more subjects...]

If one already had MultiCAS installed, normally one just downloads and installs the new MultiCAS "executable" from the net straight into the AZbox HD. No need for a "config" file and no need to uninstall the previous version already installed in your box.

A) Home -> Plug-ins -> OpenXCAS -> DOWNLOAD EXECUTABLE -> you will see the support server link to get your plug-ins there:

B) Download and install the latest MultiCAS by pressing on the OK button of your remote!

C) Get the configuration files for EMUs/CS SW from DOWNLOAD CONFIG, in the same part of the "Plug-ins menu", if there are such specific files for the latest version.

If not - no need to do this step. It seems that if you had the previous version of MultiCAS already installed [and it was all functioning], and the writers had not provided us with a specific NEW config file - the old config file will function with the new version of MultiCAS just the same.

At this point it is good to reboot your AZbox HD!

D) So, when it reboots, using your remote control ,go to Home -> Plug-ins -> [as described above...] -> MultiCAS -> Smart Card Splitter and CS.

E) Change the following, using your REMOTE:

-change the Mode to Client CCcam [if, like me, you have no smartcard to play with and share] - you can connect to other people's servers

-choose Server No. 1 [when done with the first one, move this one to 2, then 3 etc. - as many as you need, up to 16, I think...]

-choose Host Name Use - write something like: something.dyndns.org [whatever the data you get from your server/"peer", for instance somenickname.dyndns.org or whatever your server is called like - I DO NOT HAVE A SERVER, THIS IS ONLY AN EXAMPLE!!!],

-choose the Port - 12000 or whatever it is that your peer tells you to use

-User Name - whatever it is [you must have a username that normally your peer gives you and put in his server to allow you access to his server]

-Password - whatever it is [like above]

-Server - Enable

-Connect - test it [but only AFTER I enabled the one which appears below it, on the TV screen...]

It should say "login success"...

Repeat for all the servers you have, to check...

Red Button = Save.

F) But still: as soon as I wanted to get out of there, using the Exit button on my remote, it first asked me, in a little pop-up window, if I want to login to all my servers now. Press OK, of course. It will connect to your peers aaaaaand.... colours!!!

If not, change the channel and then it should connect! If not - reboot and check again...

The new version shows you the information, as to which server it is trying to hook onto and if it's a success...

G) If you have peers with a Newcamd server, you can ALSO connect to a Newcamd server directly, now!!! Configure it the same way as CCcam Client, using your remote, for instance.

Or you can connect to your own NewCS server, if you are using NewCS 1.20 RC13, which can use the AZbox HD's built-in card reader.

So, if you do not want MultiCAS to read your smartcard inserted in the built-in AZbox HD card reader, you can disable the MultiCAS access to it, using the following file in MultiCAS folder of your AZbox HD.

cardreader.cfg

###### Disable or Enable option for cardreader of MultiCAS
###### Disable_CardReader = 1 -> Disable-Internel CardReader / Disable_CardReader = 0 -> Enable-Internel CardReader
Disable_CardReader = 0
In that case, you can activate [the blue button command, removing # in front of it] and configure NewCS' [v. 1.20 RC13] Newcamd protocol, to read your card. I will presume you have installed it, activated and configured it properly [and that NewCS supports your card, of course]. More info about it a bit later...

You can even connect your NewCS card reader and MultiCAS by using MultiCAS Newcamd protocol.

Hfmls tested it with Nagra3 Cabo card [I bothered him] and he says it works. Buggy. But it works.

We await further improvements.

============================================

3) Another way of editing it all is using telesat's MultiCAS Edit. Version 1.4, I think, is the latest...

============================================

The relevant config files to discuss:

The new_biss.key - how it functions... Btw, I checked Fox TV Serbia on 12.5W and it works:


[url=http://en.kingofsat.net/find.php?question=fox+serbia&Submit=Zap]http://en.kingofsat.net/find.php?question=fox+serbia&Submit=Zap[/url]

What can we can open with MultiCAS Emulator [and not Card Sharing functions]? The info is here:


- more or less the same as MGcamd Emu.

BISS works, from what I can tell, with the keys included in the file.

You can change them via remote. See my "Alternative guide..." post no. 5:

Putting a working key into MultiCAS, via remote...

When you don't feel like searching for or can't change the full version what can you do? Find a key on the net, for educational purposes only, of course...

Where? The forums I already mentioned have the keys sections, where I get the active working key and then...

HOME button on your remote controller -> Plug-ins -> OpenXCAS -> Activation & Priority Settings -> put the # in front of all Plug-ins, except MultiCAS, by using the blue button.

Get out of the Menu, using the Exit button on your remote -> Camd Setup -> OK -> MultiCAS -> Edit And Convert Keys -> sub-menu Nagravision -> right arrow on your remote -> "down" arrow on your remote -> find the Digi TV section -> Ident [2011 - warning: for Dream, Humax etc. receivers the Ident is 2111 but don't let that worry you!] -> put the key in now...

If, for instance, key 00 was active, one must edit it in 2 parts, as the Nagra keys are "broken" in two parts: for key 00, the first part is Index 00,the other is 10; for key 01 it’s 01 & 11.

So, choose a relevant part of the key [in this case it's 00 20 11 00] by pressing the remote OK button and then one gets a new window to edit the old key. Put the first part in, then hit the Save button on your TV screen, then the other part [in this case it's 00 20 11 01], then Save.

Get out of that sub-Menu, using the Exit button, then go to Activation & Priority Settings, restart MultiCAM, using the yellow and/or OK buttons -> OK -> then get out using the Home button -> TV -> OK and.... [if the key is correct and you put it in precisely] – colours [heheeee]!!!


newcamd.cfg

Quote

## MAX Support the 12 of Serverlist by this CFG file
## N: Hostname port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

priocaid.cfg - to improve the MultiCAS speed and stability

Quote

### 0100 : SECA
### 0500 : VIACESS
### 06xx : 1rd3t0
### 0dxx : CRYPTOWORKS
### 0bxx : CONAX
### 09xx : NDS
### 17xx : BETACRYPT
### 18xx : NAGRA
###----------------------------------------------------
### max 8 of caid 0100 0500 0600 0900 1800 0d00 0b00 1700
###----------------------------------------------------
### CASE OLD #1 0600 0d00 1700 1800 0900 0b00 0100 0500
### CASE OLD #2 0100 1800 0500 0600 0d00 1700 0b00 0900
###---------------------------------------------------
0100 1800 0500 0600 0d00 1700 0b00 0900

OSCam for Azbox HD How To
Oscam 519 AzBoxHD
Take this Download, rename the file to oscam, make a folder in Multicas named oscam and put the File in it, give Rights 755

Then you need the config Files, put them all to the Folder oscam, its now ready to start, but you need Port and a Newcamd Line to your Client.
Conf is for 093b, if you need 0919 you must change all 093b to 0919 in configs.
Port in Config is used 24000, so you must make a NewCamd Line for your prefered Client with this Port(Mbox,CCcam or Mgcamd).
In Oscam.server you need an entry with your Boxkey like 01234567889
Think about unixeditor for changes
Maybe for your USB reader you must play with protocol, smargo works with intern.

Oscam must be placed at very first entry in receivermenue in Plugins, after that your prefered Client.
Openxcas.conf is in also and should work.
Logfiles are in tmp, but you can change this easy to console in config if you need this

And please, some Feedback would be great!

Ill hope you enjoy it and you will tell if working in this Thread, thanks a lot

At last : ITS NOT FOR INTERNAL READER IN AZBOX!!! NOT WORKING! YOU NEED EXTERNAL READER LIKE SMARGO+
IF SOMEONE HAS A PN WITH SOURCE FOR INTERNAL READER IT COULD BE INTEGRATED
...
Oscam 519 AzBoxHD Oscam517-AZHD-Sigma
Oscam 519 AzBoxHD
Oscam517-AZHD-Sigma

My big thx goes to Sanity from cs Board!

He has compiled this one for AZHD Community



You need an external Reader for try, Smargo+, FTDI oder PL2303 Adapter. Last is NOT integrated in Firm,you need .ko Package.



Why external Reader? Because Oscam has no Sources for the internal Reader from AZHD.



Ive made some simple Configs, please edit for your Details.

Manual multicam + cccam + newcs

Thanks to oscar_fl

Manual Instalacion Multicas Client CCcam

MANUAL INSTALACIÓN MULTICAS CLIENT CCCAM

Gracias a dveras

How to MultiCAS 1.60 and CCcam
How to MultiCAS 1.60 and CCcam

Easiest Way :

Format Application Area.

Flash with newest FW : 0.9.3501

Connect on AzBox with FTP.

Enter in /PLUGINS directory and create there directory called OpenXCAS , so You will have /PLUGINS/OpenXCAS .

Inside of OpenXCAS , create file called module.seq .

Inside of /PLUGINS/OpenXCAS create directory MultiCAS , so You will have :

/PLUGINS/OpenXCAS/MultiCAS .

Put inside of MultiCAS folder file : emu_module ( MultiCAS 1.60 ).

On Your PC create file cccam.cfg with notepad++ ( This is very important that You use notepad++ because of linux letter formatting ).

like example :

cccam.cfg will contain :

C: some.hostname.com 12000 username password
C: some.hostname.net 12001 username password

Transfer this file to : /PLUGINS/OpenXCAS/MultiCAS

Restart STB.

Now , enter Plug-ins -> OpenXCAS -> Camd Setup -> MultiCAS -> Smartcard Interface -> Smart Card Splitter & CS .

You will see Mode OFF

Use navigation buttons on RC and navigate on right side until You see :

Client CCcam .

Now scroll down to the Hostname and press Blue button and it will load for You C lines stored in cccam.cfg .

Press Red button to save, go to login and press OK if all is ok it will write for You login success , if not login fail.

Maybe when You load config it will go to Mode OFF but back on and data will be there.

That is all.

On Exit connect to All servers ? press Yes .

Enjoy.

Max 32 lines supported. *******************************************************************************************************************Tutorial : Multicas 1.6x by Zupy
Tutorial : Multicas 1.6x by Zupy

This tutorial is created by zupy, and all thanks for this tutorial and images which are creted goes to him.

As i know that this installation process of MultiCas is maybe hard for beginners, i tryed to assort everything with pictures to make this easy.

So, we go in Plugins to add OpenXCAS - for this latest versions of MultiCAS , i think You need to have Box installed with latest sw - 0.9.3501 in this case

We press red button ( add plugins ) ( In my case OpenXCAS is here, so dont be concerned about it ).

We choose server and press ok.

and we Download first
This procedure above You can skip if You already have OpenXCAS installed on Your BOX.

We will continue, as we will Download MultiCAS in .tgz format ( Latest version can be found here [url]http://www.****[/url] ), and You can also rename it to Camd.tgz . ( I am not sure is rename needed ).

Now, You start FTP app, and You transfer that file in tmp folder ( So do not extract archive, transfer it excatly in .tgz format ).
Navigate now to Plugins---> OpenXCAS--->Download Executable

And --> Install (/tmp/Camd.tgz)


So, we now go to activate installed emu --> Activation & Priority Settings



Now we run MultiCASEdit v1.1. and we go to Options - enter Your data of AzBox ( IP, username, passwrod ) and click on field Update Profile

Go to TAB SC Splitter & CCcam and put it on Client CCcam, and if it is not there click on first line.

Now we are going on fields below numbers and we will input appropriate data

- Below number 1 goes Dyndns of Your server
- Below number 2 goes port of Your server
- Below number 3 goes username of Your server
- Below number 4 goes Pasword of Your server
- As Option Enable, You need to put True and to click on Update

If we have more than one C line, we just repeat same for them


After you have finished all, click on Sent to AzBox and that is all.

If i maded something wrong or You have something which i forgett just say, as this worked for me from the first try.

This tutorial is created by zupy, and all thanks for this tutorial and images which are creted goes to him.
__________________