Author Topic: AzBox Tools (Read 7680 times)

antox · « **Reply #15 on:** December 30, 2009, 11:08:32 AM »

1) You take Damir's CCcam installer = Incubus 0.55 and

2) during the installation you put in the details as asked!

Quote

AZ_Box EMU CCcam Installer_1

Installer for CCcam AZ BOX

- Auto Start
- Incubus Cam AzBox v055 set for CCcam
- Enter data and reboot it should run everything

3) When you're done - reboot.

4) Then, go to EMU/IncubusCamd folder and edit the incubusCamd.conf at the bottom, to add another server line, this time a GBox one, if you have a peer.

The first one will be your CCcam server/peer and the other one GBox one:

Code: You are not allowed to view links. Register or Login

card_server_url_0=cccam://your username:yourpass@yourpeer&#39;s.dyndns.something:HisP ort

card_server_url_1=gbox://your.dyndns.something:your port:yourpass@yourpeer&#39;s.dyndns.something:hisport: hispass

No empty spaces!

5) Reboot, just in case.

6) Restart Incubus via yellow button, as per usual.

=================================================

EXTRAS [when you feel adventurous and playful, hehe...]

CCcam can become a bit unstable. Try clearing out the memory with this edit to your IncubusCamd .sh file, thanx to Tinos and RangerOne!!!

First back your old .sh file up! After saving it, try editing it like this:

Code: You are not allowed to view links. Register or Login

!#/bin/sh
killall incubusCamd.sigma
sleep 3
cd /EMU/OpenXCAS/incubusCamd/
./incubusCamd.sigma &

or

Code: You are not allowed to view links. Register or Login

#sh
killall incubusCamd.sigma
sleep 3
cd /EMU/OpenXCAS/incubusCamd/
./incubusCamd.sigma &

Don't forget to CHMOD it to 755!!!

Reboot!

If not working revert to the old one.

=================================================

This is to connect it to a NewCS server [Newcamd protocol]:

Code: You are not allowed to view links. Register or Login

# URL of card-server to use, formats are as follows:
#
# newcamd://:@:/
# aroureos://@:
# radegast://@:
#
# Example:
# newcamd://foo:[email protected]:12345/0CE3476FF2E1C9D9A0A109B371E3

Quote

connecting old incubus to newcamd "newcs" server

Code: You are not allowed to view links. Register or Login

 ### provider configuration ###
 [Prov:FF00]
 card_server_url_0=newcamd://dummy:[email protected]:10110/0102030405060708091011121314
 [Servers]
 #nothing here

CCcam Installer for AZ BOX

- AutoStart
- Incubus Cam AzBox v055 podesen za CCcam
- Na kraju samo uradite reboot i trebalo bi da sve radi

Napomena: unesite validne podatke CCcam servera kao sto je primer na slici

better translation later

antox · « **Reply #16 on:** December 30, 2009, 02:31:21 PM »

TooL "TeChAZ" (per AZbox offline)
TeChAZ
Abbiamo realizzato un semplicissimo tool per scaricare sul pc i file:
>>> Key.bin e new_biss.key ( praticamente la softcam per l'AZbox con cam MultiCAS).
Utilizzabile da quelle persone (poche, ma ci sono...) che non hanno il loro AZ connesso ad internet
e quindi non possono usufruire del TeChSat_AZK.

1) Scompattare la cartella TeChAZ.zip
2) entrare nella cartella e lanciare l'eseguibile "TeChAZ"
3) Cliccare i due bottoni relativi alle softcam (key e new_biss)
4) nella cartella TeChAZ ci saranno ora anche i nuovi file
5) copiare i file scaricati nel decoder /PLUGINS/OpenXCAS/MultiCAS

spero che questo "pensierino" torni utile a qualcuno
***********************************************
We have developed a simple tool to download files on your PC:
>>> Key.bin and new_biss.key (practically the softcam for azbox cam MULTICASA).
Usable by those people (few, but there are ...) who do not have them connected to the Internet AZ
and therefore can not use the TeChSat_AZK.

1) Unzip the folder TeChAZ.zip
2) enter the folder and launch the executable "TeChAZ"
3) Click the two buttons on the softcam (key and new_biss)
4) in the folder TeChAZ there are now new files
5) copy the files downloaded in the decoder / plugins / OpenXCAS / MULTICASA

Code: You are not allowed to view links. Register or Login

http://www.2shared.com/file/10341520/62059189/TeChAZ.html

antox · « **Reply #17 on:** December 31, 2009, 12:32:21 PM »

Code: You are not allowed to view links. Register or Login

Installer for CCcam AZ BOX

- Auto Start
- Incubus Cam AzBox v055 set for CCcam
- Enter data and reboot it should run everything

antox · « **Reply #18 on:** December 31, 2009, 12:44:18 PM »

Azbox HD Toolbox v 1.3

Code: You are not allowed to view links. Register or Login

http://www.4shared.com/file/120448355/2545c184/Azbox_HD_toolbox_v_13_by_TEAM_BSC.html

antox · « **Reply #19 on:** December 31, 2009, 12:52:10 PM »

AZrctrl - AZBox HD Remote Control (Made in Brazil)

Code: You are not allowed to view links. Register or Login

I'm developing a SW to manage the AZBox HD remotely and I believe already have something good enough to share.

At moment (ver 0.7.15) is possible to do some nice things like:
* Remotely control your AZBox by mouse or keyboard.
* Run custom scripts with sequences of commands.
* Capture and show OSD screens (menus, lists, youtube, etc...).
* Save these OSD screen shots.
* Virtual Keyboard for help fill text box in your AZbox.



Microsoft .NET Framework 2.0 (or later) is need.
Instalation: unpack and run.
Tested with Firmwares: 0.9.3281, 0.9.3501

Coming Features:
* Channel List Editor
* System Status and Backup Utility
* Reserved Record/Play Editor

antox · « **Reply #20 on:** December 31, 2009, 01:11:21 PM »

DCC v2.8

New in Version 2.80
- Show EPG-Data (EIT) in Recordings
- Local copy within the box without detour over the PC
- Adjustment installation of newer images over the bootmanager
- FTP-Textviewer/Editor now on PC-side also
- Some bugfixes (Browser RC, Identify external images and more)
- Russian added, unchecked (Thanks to Vladimir Gavrilov)
- Portuguese added, partial/unchecked (Thanks to Jose Luis Mota)

antox · « **Reply #21 on:** January 04, 2010, 10:35:17 PM »

CCcam 2.1.1 Azbox HD.

antox · « **Reply #22 on:** January 07, 2010, 11:06:50 AM »

hungary translation... AzBox Control Center - ACC - v 1.0 by telesat ..plugins..
italian translation by Team NTM
Russian language translation by satdream
Location in attached archive

antox · « **Reply #23 on:** January 08, 2010, 09:09:28 PM »

Pix2Azbox version 0.2.5

Code: You are not allowed to view links. Register or Login

Tool that allows you to easily transfer photos to your Azbox and automatically resizes so they can be displayed by Azbox without waiting for the long and tedious optimization of the same

antox · « **Reply #24 on:** January 08, 2010, 09:17:01 PM »

Monkus OpenXCAS Tools 1.6:
- AzBox HD Backup v0.95 (UPDATE)
- AzBox HD USB Mount Script v2.3
- AzBox HD USB Background Copy Script v1.5
- AzBox HD SwapOn v1.2 (UPDATE)

# AzBox HD Backup
# utility to backup and restore all important azbox hd settings. sure, i have only
# restricted configuration, just report your settings (configuration files) and bugs
# to my email. this plugin is usefully in case of firmware upgrading with format
# application area f.e.

# AzBox HD USB Mount Script
# some types of usb sticks (f.e. my sandisk cruzer) have problems with azbox automount script.
# this plugin will probe usb device before running default usb_script.sh. with this plugin,
# you can mount usb devices using remote controller, no need to connect to you computer via
# telnet/ssh and do that manually. remote controller contains button "usb" for unmountig, but
# missing button for usb mounting.

# AzBox HD USB Background Copy Script
# if you want to copy data f.e. from usb stick to internal or external disk without using your computer, you
# can run copying from this plugin with remote controller. during this operation, it is possible to watch
# tv, browsing or go to standby. it is recommended to use swapon plugin (part of monkus openxcas tools)
# before using usb background copy script. don't forget to setup variables SOURCEDIR, TARGETDIR and TARGETDISK.

# AzBox HD SwapOn
# during some operations (f.e. large files copying), your azbox goes out
# of memory and process will be killed. using this plugin, you can prevent
# from it. use command "free" to display information about free and used
# memory on the system. disable row at the end, if you can use swap permanently.

complete changelogs are located at the beginning of each script.

Quote

Installation:
- OpenXCAS must be installed previously
- copy monkus_tools_1.x.tar to /PLUGINS/OpenXCAS directory
- tar xvf monkus_tools_1.x.tar
- rm monkus_tools_1.x.tar

How to use:
- FORWARD Button on Remote Controller, select Tool, press OK button
- HOME, PLUGINS, OpenXCAS, Activation & Priority Setting

antox · « **Reply #25 on:** January 08, 2010, 09:23:30 PM »

PC EDIT V2.06

Tool that allow user to download / Upload and edit your channel list, Satellites list and favourites settings

azloader

Tool that allow user to update software to Azbox through a RS232 pc port

Tirkic · « **Reply #26 on:** January 10, 2010, 12:08:05 PM »

AzBox HD CCcam Monitoring Software

Tirkic · « **Reply #27 on:** January 10, 2010, 12:14:38 PM »

antox · « **Reply #28 on:** January 12, 2010, 12:02:54 AM »

Quote

Alter the functions of access channels (now the location of channels is not based on his position but in the memory channel data, this ahara that some channels could not find, now located).
- Fixed bug - when attempting to remove the last channel on the list was error
- Added the orbital position in the list of configuration sats, besides these are sorted automatically by this position to open the list or change its position.
- Due to problems you might encounter on the list to change the transponder's own data on one channel (due to the tree structure that has the list) has disabled the ability to modify the frequency and polarity to edit a channel.
- Added on to open a channel list directly from the backup file generated by Azbox in a pendrive. It is also possible to save the list in this format to pass to Azbox a pendrive using the Restore option configuration menu (This way the list is reloaded without restarting the Azbox, but unfortunately not so with the configuration of satellites. Likewise, in the backup, the azbox not include the file with the recording reservation list and although this is added to the backup file from the MaZ, resetting is passed to Azbox but also require a reboot. I got reported in the official forum to see if they fix).
- Added the ability to sort the overall list (that list has to be ordered virtually - by clicking on the column - should be in "TV channels" or "radio channels" and "All satellites) , the channels are ordered by drawing them to the desired position.
- Added Hungarian language
- Added Swedish language.
- Since I met channel lists (especially with tuners B), which channels had to make a tuner that had been added either to the virtual channel list all channels but were not added to the tv channels or radio channels, I created a function to verify these lists by adding the missing channels and channel clearing debris that may have been be deleted. this function is executed to open a list and hope to make more stable lists.

view. 2.2

- Added button to go to Azbox only the recording reservation list
- Fixed bug - when choosing XP style did not look right on the button bar on reservation lists of recordings
- There was more time in the TV pictures of catches for catches in HD channels
- Fixed Bug - If we had duplicate channels resulted in an error when trying to delete.
- If ordered virtually the channel list by clicking on the column you want to order, we can again leave it in the actual order on any column by clicking the right mouse button.
- Added Russian language.
- Added some scripts (with permission from Platinum).

antox · « **Reply #29 on:** January 14, 2010, 07:41:41 PM »

NOVI Azbox Remote Controller by Mortimer

News:

Author Topic: AzBox Tools (Read 7680 times)

antox

Re: Azbox Tools

antox

TooL "TeChAZ" (per AZbox offline)

antox

AZ_Box EMU CCcam Installer_1

antox

Re: Azbox Tools

antox

Re: Azbox Tools

antox

DCC v2.8

antox

CCcam 2.1.1 Azbox HD.

antox

Re: Azbox Tools

antox

Re: AzBox Tools

antox

Re: AzBox Tools

antox

Re: AzBox Tools

Tirkic

AzBox HD CCcam Monitoring Software

Tirkic

Azbox Remote Control By Mortimer (Telnet)

antox

Maz 2.3 Upgrading

antox

Re: AzBox Tools