Hd Serial Loader
!!!!WARNING THIS SOFTWARE IS FOR THE DARKBOX HD ONLY DO NOT USE ON THE SUPER HD OR COMBO HD!!!!

1. New SW attached
What is improvement at this version!
****** For downloading success, first update Boot via USB firstly. Boot updating procedure. MENU --> USB --> Selecting Mboot.bin --> OK --> Rebooting.

A) RS 232 Download tool (Serial Download via RS232) : Herein attached the download tool ( gtrom )

** PC to STB serial download.

1) Pls kindly double-cilck GTROM and execute it. After that, Press Browse and select the file to download and finally press download.
2) While STB AC Power Off/On, keep pressing Power button on the Front until dnLd will be displayed on the LED.
3) LED will be counted. SUCC will be displayed if the downloading will be complete.
4) Burn will be displayed and then Flash Writing.
5) Pls wait until STB rebooting.

B) Set-to-set Download: Herein attached download instruction.
** STB1 to STB2 download.
1) While STB 2 AC Power Off/on, keep pressing power button on the Front until dnLd will be displayed.
2) While STB 1 AC Power Off/On, keep pressing select(Boot) or EXIT(API) or MENU(CH) until uPld will be displayed on the LED.
3) LED will be counted.
4) When the downloading will be complete, STB 1 shows END and STB 2 writing Flash.
5) Pls wait until STB 2 rebooting.
C) Add language (Polish, Holland, Czech language):
D) Biss-Softkey upgrade (When inputting key data, If the Provider ID is same, different input of the key num makes the key operated automatically in accordance with the corresponding ch.)
E) E_SW Hidden menu: Normal mode - > if you press ﾃつ｡ﾃつｰ 8888ﾃつ｡ﾃつｱ in the menu mode you can go ﾃつ｡ﾃつｰedit menu ﾃつ｡ﾃつｰ
F) Signal level Improve when you connect signal:
G) Antenna setting de-bugging and Improve:
H) Sexview Add
I ) DVcrypt card include
J) Improvement stability

Darkloader loader

Darkloader loader
This software is also known as Cedit.

api_file
If your Reciever dont work ,stop Booting this is right files. Haw to fix that !? 1.Douwload this files in your usb. 2.Stik your USB in Receiver 3.Swich of your Reciever. 4.Press Volume + ( right side when you are in front of your Receiver )Button in your Receiver and swich one same time When you are presing to your volume same time .. After that you see coming up API Files and start the fist red light flashing ..In that moment take of the fingers from your volume button and wait second red light and third is well untioll says END. 5.After that swich off and on your Receivers... Receivers is fix ,after that put lates software and your channel List on your usb