Flashing & Initial Setup Of Your DreamBox With Dreamup
1 Before making any connections from your Pc to your Dreambox switch off both your Dreambox and PC.

2 Start universal DreamUp and make sure the Use Network option is unticked and select the com port your Null modem cable is attached to.

3 Now click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.Do this by either switching back on the power at the plug socket or putting the power cord back into the power socket at the rear of your Dreambox.


4 Now select Flash and point DreamUp to were you have your Dreambox Image and click open, the upload will now start. This will take around 12 minutes.
5 After the flash has completed click disconnect and power down then power up the box.

6 Time to get sat in front of the TV! As your box boots you’ll see the Boot Logo Screen come up maybe a couple of times.

7 At the Pal Screen Select Pal or the system your TV uses and then press the green button on your remote to save.

8 Select your language and press the OK button.

9 Select your time zone and press the green button to save.

10 You’ll now see the Diseqc Setup menu and have 3 options to choose from

No Diseqc for a single LNB Setup.
Simple For a the setup of 2 Lnb’s
Complex for Diseqc 1.2 or Usuals/Goto X
11 If you want to use usuals keeps the goto x box ticked and enter your Longitude and latitude and press the green button to save.

12 Now select Auto Transponder Scan. This will scan all available transponders till a valid one is found. When found press green to scan. When the scan is complete press OK.At this point you can now scan another satellite with a press of the green button or red not to. Later on in this tutorial ill be explaining how to transfer channel setting so you don’t really need to.

13 Click exit and select a channel free to air to view.Now press the menu button-option5-reboot now, this will save your settings.
That’s the flash and initial setup complete.

Dreambox Image Install With FlashWizard Pro
1. Extract Flashwizard Pro to a folder of your Choice.

2. Start Flashwizard with the FlashwizardPro.exe.

3. Click the configuration tab and select you language.

4. On the same page you'll need to fill in the Connection Parameters at the top of the page.

5. If you have not changed you password Login= root password = dreambox.

6. To obtain your dreambox IP do the following on your dreambox remote.

Menu-Setup-Expert Setup-Communication Setup.

You'll see your IP at the top of the page make a note of this and enter this IP into Flashwizard.

lso untick the DHCP box so your Dreambox IP will never change and remain static.

7. Now click the install a firmware tab top left.


8. Now click on the yellow folder, this will open a browser window.

9. Now navigate to the Dreambox image you would like to install.
 
10. At the prompt select YES.

11. You'll now see the image been transfered.

12. And then image transfer completed.


13. Exit Flashwizard and pull the power from you dreambox and wait for 30 seconds before reapplying power.

14. Time to get sat in front of the TV! As your box boots you’ll see the Boot Logo Screen come up maybe a couple of times.

15. At the Pal Screen Select Pal or the system your TV uses and then press the green button on your remote to save.

16. Select your language and press the ok button.

17. Select your time zone and press the green button to save.

18. You’ll now see the Diseqc Setup menu and have 3 options to choose from

No Diseqc for a single LNB Setup.

Simple For a the setup of 2 Lnb’s

Complex for Diseqc 1.2 or Usuals/Goto X

19. If you want to use usuals keeps the goto x box ticked and enter your Longitude and latitude and press the green button to save.

20. Now select Auto Transponder Scan. This will scan all available transponders till a valid one is found. When found press green to scan. When the scan is complete press ok.At this point you can now scan another satellite with a press of the green button or red not to. Later on in this tutorial ill be explaining how to transfer channel setting so you don’t really need to.

21. Click exit and select a channel free to air to view.Now press the menu button-option5-reboot now, this will save your settings.

That’s the flash and initial setup complete.

Dreambox Control Center Setup (DCC)
Dreambox Control Center Setup (DCC)

1. Unrar DCC to a folder and start the program with the DCC.exe

2. First thing to do is select your Language.and enter your Dreambox password.


3. Now we need to select your Network configuration, most of you will have a router so this need to be selected.


4. At this point if you know your Dreambox and Router IP's enter them manually if not press the search button below the router and then the search button on the popup.

5. When DCC has finished searching your router will normally be the lowest ip in a range so highlight it and press accept.


6. You can now repeat this to find the Dreambox IP or use the following method.

Menu-Setup-Expert Setup-Communication Setup.
You'll see your IP at the top of the page make a note of this and enter this IP in DCC under the Dreambox ICON.

Also untick the DHCP box so your Dreambox IP will never change and remain static.

7. After you have inserted the IP's click the reconnect button under the PC icon. If you have done this correctly all lines to the router and dreambox should now be green.

DCC is now configured.

Manually Transfer Keys To Your Dreambox
Manually Transfer Keys To Your Dreambox

1. Extract the keys of your choices to a folder

2. Start DCC295 and click on the FTP tab.



4. In the right hand window off DCC navigate to where you extracted your Dreambox keys go in one level so you can see the keys and scce folders and in the left hand window navigate to var/keys.

5. In the right hand window enter the keys folder and select them all. Now press the Transfer arrow to transfer the files over to var/keys in the right hand window.

6. Now go up a level in both window so you have var/scce in the left hand window and enter the scce folder in the right hand window. Now press the Transfer arrow to transfer the files over to var/scce in the right hand window.

7. Now reboot your Dreambox Menu-shutdown-reboot now.
Job done

Transfer A Channel List To Your DreamBox With Dreamset
1. Unrar Dreamset and place all the files into a folder.

2. Start the program with the little dish icon.
Click setup.


3. Click the setup Tab at the top and fill in your IP and passwords.

4. On the Firmware Tab for Enigma1 (500-7020) select Enigma 1 (rel109) for Enigma 2 (DM7025) and (800-800) use Enigma 2 version 3 or 4. Ensure passive FTP is ticked.
5. Now click the save configuration tab and then the test configuration tab to check we have a connection to the Dreambox. If successful press OK and then OK again

6. Now click open and scroll to the settings and select the services for E1 and lamdb file for E2 and open.


Now click the transfer button and then write and wait for it to finish.

Job done

How to Reset Dreambox root password
Reset Dreambox root password

If you happen to forget your Dreambox root password, here's how to do it:
If you have an image that accepts plugins from internet (e.g. Gemini)
1) Install TuxCom plugin
2) Run it from Yellow button
3) Point to /var/etc/passwd
change the line containing root into root::0:0::/:/bin/sh
now you can telnet your Dreambox with an empty root password and create a new password for root.

Change Your Dreambox Password With DCC ( Pictorial)
Change Your Dreambox Password With DCC ( Pictorial)

1. Start DCC and ensure your network is ok and you have green lines to your router and Dreambox.

2. Click on the Telnet Tab.
3. At the prompt type passwd and click enter.

4. Ignore what it states about password length and enter a new password. Any length. Please note the cursor will not move and you will not see what you type, Then press enter.
5. Job Done.

How To Setup A None Usuals Motor On A Dreambox
How To Setup Motor Position Diseqc 1.2 None Usuals Motor.

This guide will briefly show you how to configure a none Usuals motor on your Dreambox under the Diseqc 1.2 protocol.

On your Remote.
1. Setup-Service Searching-Motor-Setup.

2. Untick GotoX.
3. Press blue button for next page.

4. Make sure top drop-down bar is in position mode.
5. Start at Left side of Arc and select say 45 east.

6. Scroll to direction bar.

7. Now use the <> buttons on your remote to find 45 east, if you don't make sure the transponder your on is a working one ( Check Lyngsat) and try again.
8. When you find the signal and confirm it is the correct orbital position press the green button to store it. On the pop-up store at position 1.

Now repeat all the above for the next orbital position say 42 east and sore at position 2, repeat until all orbital positions are covered.
THX FERRET!!

 swcc FlashWizzard Backup & Restore Guide
Flash Wizard Configuration & Backup

1. Start FlashWizard and click on the Configuration & Utilities Icon.

2. Under Connection Parameters fill in your Dreambox IP and your username and password. Root-dreambox if you have left them as standard.

3. Now select the Install a firmware into flash memory.

4. Click on Flash Image Backup but rather than selecting a firmware to flash give your image a name in filename box and click save.

5. Select no at the insert text and graphics prompt.

6. Backup will now start.


Restore a Image with Flashwizard
1. Open FlashWizard and click on the install a firmware into flash memory tab.

2. Now click the folder icon and select your Backup image and click open.

3. Select yes at the prompt.

4. Restoring Image now starts.

5. Job done, just leave your Dreambox for 2-3 imns and then power down and power up.

THX FERRET

How To View ITVHD On Your DM800/8000 Pictorial
Some channel lists and indeed a scan on your own DM800/8000 will yield a radio screen on ITVHD.

You will need to install Cute FTP and configure a connection to your DM800/8000.

In cute FTP navigate to /etc/enigma2




In cute FTP right click the lamedb file your just transfered to your desktop and select edit.This will open the file.


Now from the task bar click edit then find and replace in the top box type ITV HD.

Now edit your three ITV HD lines with these three lines

290e:011a0000:090b:003b:1:0
ITV HD
p:BSKYB,c:000d49,c:030d49,c:040d4a,c:050001,f:5


Some lamedb files use this format

290e:011a0000:090b:003b:1:0
ITV HD
p:SKY Digital,c:000d49,c:030d49,c:040d4a,c:050001,f:5

Now click the floppy disc icon on the task bar of cuteftp to save.

Now navigate to /etc/enigma2 and send the edited lamedb file back to that directory.

Now click the floppy disc icon on the task bar to save.

Now pull the power plug from back off your dm and re-apply power.

Note if ITVHD is not transmitting you'll see a test screen as long as it is not the radio screen its working. :thum:
THX FERRET

How To Mount Your PC's Harddrive with Dreambox
The following method allows you to use your
PC harddrive as an external networked drive
for any Linux STB running a common image without
using nGrab. It will work whether or not you have
a harddrive in your Linux STB. You can also use this
method to mount any other PC Device (CD, DVD, USB, etc)
to a folder on your STB.

1.) On your PC, go to Administrative Tools > Computer Management >
Users. Create a new user with a password. Right-Click on users,
create new user. Call this user "U" with password "U". This user
will be your STB. Remember to verify that the user you created has been added

2.) Turn OFF (untick) "Use Simple File Sharing" in Windows Explorer
(Tools>Folder Options>View).

3.) Create a new folder on your PC called anything you like, anywhere you
like. This will be where your recorded programmes are stored. We will call it
"S" in this example. Usually you must also create a subfolder called "movie" or
something similar. The name will vary according to the image you are using.
a.) Right click on the main folder you just created and toggle "Share this folder"
with settings as in the picture below. Its subfolder (eg. "movie") will also
be shared.

b.) Give this user full access to the shared folder by pressing "permissions"
in the box above, removing "Everyone", and entering the appropriate permissions
as follows

4.) Using the remote with your STB, navigate to "mounts". This is usually
Menu>Setup>Expert Setup>Communications Settings>Mounts.
a.) Enter the information as shown in the image. In the example, 192.168.1.2 is the PC IP ADDRESS. You may need to change this to your PC's IP address.
b.) Select CIFS. CIFS requires a username and password. These are U and U in this example.
c.) Dir is your PC's shared folder. Enter "S" WITHOUT trailing /
d.) LocalDir is where recordings are ordinarily stored in your STB. Here it is /hdd. NOTE THE FORWARD SLASH!
e.) Select read-write (rw) access.
f.) "Extra" can be left as is.
g.) Enter the User and Pass (U and U in this example).
h.) Tick "Automount" and save. Only one mount to a given STB directory can be active at one time.
i.) Press "mount". A message should appear informing you of success or failure.

Note that we kept the shared folder name, the username, and the password quite short, since these had to be added later using the remote. If you are better at SMS than I am, the lengths of these can be anything you like.

If everything succeeded, all of your recordings will be directed to your PC harddrive when you press record or set these to record with the timer and will show up in the shared folder you made earlier on the PC.

Remember that files will be sized as in the expert settings menu. To have an entire film record as one file, set the size as in the expert setup menu below to be as large as possible. The recording need not take up the entire possible size, but neither will it be "chopped" into smaller files. Making an exception to this general practice would be reasonable if you intend to use these files later on DVD (VOB/MPEG format) which usually requires 1GB file parts. You may lose a couple of seconds between the smaller file segments. If this bothers you it is probably better to use file-splitting and DVD authoring software on a larger single file for burning to DVD

Recordings are in the .TS (transport stream) format by default, which can be played back easily on the PC with VLC (VideoLAN - Free and Open Source software and video streaming solutions for every OS!). VLC is also excellent for transcoding to other formats, such as VOB/MPEG or AVI for playback from DVD and can also be used for streaming recorded video.

Recordings can also be played back on your STB by pressing the "FILE" button on your remote, navigating to "root" or "harddrive" and selecting the recording to play.

Occasionally Automount does not work correctly. In this case you will see an empty directory or files on your STB's harddrive (if any) when you press FILE and navigate to harddrive. Go back to the "Mounts" page in your OSD and re-mount the PC drive to solve the problem.

Firewalls may prevent your STB from connecting to your PC. It is easiest to put the IP Address of your STB in the local zone or equivalent. How this is done depends on your firewall.

Finally, this whole "How-To" is really just how to mount a folder or device on your PC using your STB. The same techniques will work for mounting your CD/DVD drive (a device), for example. If your STB supports files in formats other than TS, you can play these formats back through your STB. If your STB only supports MPEG TS and MP3, you can still play these files from any type of storage device your PC can run, so ... mount away
 

You can also change song with remunt and rev fwd .

How To Reset Dreambox Password:

menu
setup
blue panel
addons
download gemini server
plugins
Tuxcom
OK
YES
OK
EXIT ALL
menu
setup
blue panel
Plugins
TuxBox Commander
scroll down to var
OK
scroll down to etc
OK
down to passwd and press 4 (edit)
OK on first line
RED to clear line
enter root::0:0:root:/root:/bin/sh with remote buttons like an writing an SMS
OK
EXIT
save YES
EXIT
save YES
EXIT
EXIT
EXIT
then login with telnet
login root
no pass !

 HOW TO Change the forget pass on DM !
Change the password on DM
If you have forget the pass of your's DM , just make the next steps.

1) Install and run TuxBox Commander plugin

2) Change directory to edit /var/etc/passwd

3) Remove the encrypted password.

--> ATTENTION !!!! THE passdw file only !!! NOT the passdw-

3.1) In the file /etc/passwd is the line:
root:b:0:0:root:/root:/bin/sh or something as !!!
root:dkjhfhlksfdiueyr736592cigsdjgfj:0:0:root:/roo t:/bin/sh

3.2) the password field is the b or the encripted string dkjhfhlksfdiueyr736592cigsdjgfj

3.3) Delete the b or the string .
The line now is:
root::0:0:root:/root:/bin/sh
(for the DM500, if you are using an other DM keep the
root as it is, you must delete ONLY the string)
4) Save the file and exit

5) Telnet to your DB with root user without password

6) Create a new root password with the command : " passwd "

If you want put the original file with user:root and pas.:dreambox in one directory in your's DM and if you forget again the pas. then just copy the file passw in the original location

I have make it and it works
Sorry for my English
Bye from Transylvania

(31-March-2008 21:41)
Change the password on DM
If you have forget the pass of your's DM , just make the next steps.

1) Install and run TuxBox Commander plugin

2) Change directory to edit /var/etc/passwd

3) Remove the encrypted password.

--> ATTENTION !!!! THE passdw file only !!! NOT the passdw-

3.1) In the file /etc/passwd is the line:
root:b:0:0:root:/root:/bin/sh or something as !!!
root:dkjhfhlksfdiueyr736592cigsdjgfj:0:0:root:/roo t:/bin/sh

3.2) the password field is the b or the encripted string dkjhfhlksfdiueyr736592cigsdjgfj

3.3) Delete the b or the string .
The line now is:
root::0:0:root:/root:/bin/sh
(for the DM500, if you are using an other DM keep the
root as it is, you must delete ONLY the string)
4) Save the file and exit

5) Telnet to your DB with root user without password

6) Create a new root password with the command : " passwd "

If you want put the original file with user:root and pas.:dreambox in one directory in your's DM and if you forget again the pas. then just copy the file passw in the original location

Here will learn how to quick install new image & old settings in Dreambox.
You need:

Total Commander or other client FTP
DCC - Dreambox Control Center
Flash Wizard - or other program for Flash new image.




1) Back-up.


First will have to copy all programs installed and settings from DM.

From FTP will copy in hdd what we have installed in/from DM:

/var/bin - attention do not copy enigmanet ! Copy only CAM and SCRIPT installed !

/var/etc
-movieplayer_linux.xml - if exist.
-movieplayer_win.xml - if exist.
-satellites.xml - actual list with satellites and transponders. Optional.

/var/keys - copy all.

/var/script - copy script for launch CAM and installed programs ! check in Blue Panel to see what CAM you have and check Plugins ( Tools ) to see installed programs.

/var/tuxbox/config
/var/tuxbox/plugins
- copy all.
- attention do not copy link to another directory, like link to scce !

/var/uninstall - copy all.

For safety write down your DM password and settings from Communication Setup.

For safety make a backup copy of your image and settings with Flash Wizard.

2) Install new image.

Install new image ( Flash Wizard ) and restart DM, unplug DM from AC, wait few second and plug again.
If image it is correct programmed DM will start and settings menu will appear.
Do not set anything.

3) Reinstall your settings and programs.

From telnet change your password in DM with old one.
From FTP copy saved settings and programs in the same place.
/var/bin
/var/etc - optional
/var/keys
/var/script
/var/tuxbox/config
/var/tuxbox/plugins
/var/uninstall

Restore attribute 755 at files from:
/var/bin - all
/var/script -*.sh
/var/tuxbox/plugins *.so
/var/uninstall *.sh

4) Final.

It is very important do not restart/reboot DM from menu/telnet/sw because DM will save his setting over your restored ones.
unplug DM from AC, wait few second and plug again.

DM will restart with new image and ALL settings as before.




Tips

* check how much space you have free in your old image, it is possible that in new image will not be the same free space for you to install all your stuff.
If you don't have enough free space do not try to reinstall from first try all the plugins.
However it is important to reinstall complete dir. \var\tuxbox\config\enigma\* check settings in Communication; if you use DHCP and DM have all the time the same IP in the network is no problem;
Other way remember that after you reprogram DM will have new default IP and password.

 
   Bedienungsanleitung OLED-Upgrade-Kit Umbau