Everything for the decoder Jepssen mediabox_st 5_hd-fw.
Firmware update for the decoder-Jepssen_mediabox_st 5_hd
step 1 put the fw. CCCP-Team_3.22_mediabox_st-5_hd
better on a USB stick formatted in fat32
turn on the receiver put the USB stick menu, go to installation
arrow to the right and stand up for software update the fw is ok there.
you have put on the pen-CCCP-Team_3.22_mediabox_st 5_hd
you ok and begins to load before reading the fw. then writes
reached 100% after a while the receiver reboots itself.
At this point you can load the channel list do the same procedure
kiaviche to go to the menu, press the blue button when you go to the 0x30 seca update r4i
The first is the above 0c 0d is the second and the third the 0th
Now to the heart of this decoder
8888 menu_intrattenimento_ if you press a menu secret
with this menu you can ski to your receiver go step by step
arrow to the right and stand up ok Networking
put the DHCP on the right arrow switch on and saved with the red button you see
your ip address and the rest of course you first have to put a network cable to the decoder
Now exit and go to Server Setup oksulla first on on empty do ok
opens a window
Active arrows to the right place to Start
Server put CC-camd always right arrow
now you have to put a strip inside to do so if for example we have this ski strip
C: 12000 giacomino.dyndns.org dot foo
we:
giacomino.dyndns.org to address (without the c: that is not needed)
on port 12000
ID-ball
Password on foo
the red end button and save
exit, and accepts
andianmo to see the sky and more bluuuuuuuuuuuuuuuuuuuuuuu uuuuu uuuuu UUUUUU
COMPATIBLE WITH:
CARD TIVU 'SAT (without the need for CAM)
SKY CARD (no need for CAM)
Mediaset PREMIUM CARD (no need for CAM)
CARD Dahila (without CAM)
YOU CAN PUT UP TO TWO CARDS AT THE SAME TIME
Media Player: Added new DivX Codec even this
I hope I have done a pleasant thing
All this for study purposes only and make good use of.
By Rexy
