OpenBox S9 Modified L53 Dump.file with Channel List v3.90 [17 March 2011]

This is a modified L53 Dump file, and was released on [17 March 201]
This L53_MOD Dump file is based on the latest firmware version [HDS2-11-03-14:0718CMT]

The Official firmware is the same but without a channel list included.

----------------------------------------------------------------------------------------------
To keep your receiver & channel list upto date, go to the following link & download then install the latest channel list,
which I shall try and update on a weekly basis, with only the most relevant changes.
You are not allowed to view links. Register or Login
----------------------------------------------------------------------------------------------
Just remember to allow your common sense to prevail .... and to always download the L53 files from the source [sataid.net], as we can not guarantee the authenticity of our files if downloaded from another location, and also take the time to read the instructions contained within the zip file, of course if any of the original files are missing, or any extra files included, then the file have obviously been tampered with in one way or another, and should therefore obviously be avoided, and not installed.
Each of our zipped L53 dump files, will consist of the following 4 files only:
1 .. HDS2_L53_MOD file
2 .. Constant file
3 .. Replace file
4 .. Instructions file. which includes direct links to sataid.net

Each Firmware & Channel List download will now carry an MD5 Checksum Value.
Always Verify the MD5 checksum value:
To check if this download is genuine, download a free copy of WinMD5 from:
You are not allowed to view links. Register or Login
The genuine checksum value for the files will be posted in the following: Firmware and Channel list sections.

You should verify each zip before unzipping and installing the file, otherwise we can not guarantee it, as it may have been tampered with in one way or another, the MD5 option is to ensure your safety.

If the checksum value do not match perfectly you should delete it, and then download the genuine file.
THERES NO LOGICAL REASON FOR REMOVING, EDITING OR INCLUDING ANY FILES TO THE ORIGINAL ZIP.

The MD5 checksum value are as follows:

Official Firmware
bd8c38e3411b02fcb6f40b4c241d8db1

Modified Firmware
d69cac368a37a130d3ee75fc2eb1e234
----------------------------------------------------------------------------------------------

Included in all the L53_MOD Dump files, is the latest L53 multi-satellite channel list.
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list
Also included is a constant cw file, which contains active Biss keys, mainly for use on 26E 10E 5E & 4W.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
It mainly improve the following:
1. Add Thai language
2.Increase to 2000 users about server
3.Improve $$$$$$2 sharing
4 rebooting problem when sharing
5.If the receiver is an openbox clone, then do not upgrade our software, as it will kill clones!

Please Note:
The Astra 1C satellite carries feeds, and is in an inclined orbit.
So unless you have a motorised elevation option fitted to your dish
you may find this satellite difficult to locate.

Express AM1: All the Ku channels have now moved to C-Band.

Updated channels on: 1w,5e,7e,9e,10e,13e,19.2e,21.5e,23.5e,26e,28.2e,30 e,31e,33e,36e,39e,42e & 45e.

I believe all the channels that caused rebooting problems, have now all been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

To avoid any possable conflicts, it is always wise to delete all channels from your receiver before installing a new list.
To remove all channels click Menu -> Edit Channel -> Delete All

Instructions:
Click Menu -> Tools -> Upgrade by USB -> Set Upgrade Mode to Image File -> Upgrade File select HDS2_L53_MOD -> Now select Start and click YES to install.
If this is the first time you have uploaded a Firmware or Dump.file, then you will also need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your located in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Setup -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the list has been correctly added, by clicking Manage Config Files and clicking on replace.list if all went well, you will see the following example: X: {{ 1833 } { 1702 }}
================================================== =================================

How to add the Constant cw list.
Click Menu -> Network Setup -> CCam Client Setup -> Update Files by USB
-> Constant cw now click either the OK or Green button to select Constant cw and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the keys have been correctly added, by clicking Manage Config Files and clicking on Constant cw if all went well, you will see all the keys listed.
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files.
How to avoid installation problems:

Thanks to
Laurals.



Unmoded file You are not allowed to view links. Register or Login

L53mod file You are not allowed to view links. Register or Login