CardSharing-X
» Receivers « => Other HDTV Receivers => » HDTV « => Azbox HD => Topic started by: labud on November 22, 2009, 05:39:23 PM
-
Version 534-tested on AZHD and running with Smargo
-
Oscam 519 AzBoxHD
OSCam for Azbox HD How To
Take this Download, rename the file to oscam, make a folder in Multicas named oscam and put the File in it, give Rights 755
Then you need the config Files, put them all to the Folder oscam, its now ready to start, but you need Port and a Newcamd Line to your Client.
Conf is for 093b, if you need 0919 you must change all 093b to 0919 in configs.
Port in Config is used 24000, so you must make a NewCamd Line for your prefered Client with this Port(Mbox,CCcam or Mgcamd).
In Oscam.server you need an entry with your Boxkey like 01234567889
Think about unixeditor for changes
Maybe for your USB reader you must play with protocol, smargo works with intern.
Oscam must be placed at very first entry in receivermenue in Plugins, after that your prefered Client.
Openxcas.conf is in also and should work.
Logfiles are in tmp, but you can change this easy to console in config if you need this
And please, some Feedback would be great!
Ill hope you enjoy it and you will tell if working in this Thread, thanks a lot
At last : ITS NOT FOR INTERNAL READER IN AZBOX!!! NOT WORKING! YOU NEED EXTERNAL READER LIKE SMARGO+
IF SOMEONE HAS A PN WITH SOURCE FOR INTERNAL READER IT COULD BE INTEGRATED
-
Oscam-AZHD--Rev529
-
Lastest Oscam for Azbox HD
Version 534-tested on AZHD and running with Smargo
-
oscam-0.99.4svn688-AZboxHD
-
OSCam-AZBox HD-Latest
OSCam 0.99.4 Build 934 AZBox HD
-
OSCAM SVN938
OSCAM is a pure card server, which inter alia read Nagrakarten can. Httpport With the latest version Webif (adding in the. Conf under monitor, like this: httpport = 808
Even the AZHD version for internal reader attached, but untested (no time).
I do not know how the current status is, so just test with protocol and device = azbox SCARD
1. AZboxHD = normal version without the internal reader function that works with FTDI and Smargo mouse click Protocol
2. AZbox reader, this is the version with an internal reader, but without functional status whether or not
3. Monitor AZbox, which is the version with a built Webif (thanks to Alno!). Conf as above and then open browser and type BoxIP: port and be amazed
----------------------------------------
oscamSVN940-AZbox-WebifVersion
If you look at the programming is missing "really still the Multicase / OpenXcas PArt sometimes, but I am as fit as yet.
I have had enough time to compile it in C + + and to understand something
The monitor is ja mal genial, so the Webif. You may find the new version with Webif.
For the internal reader, Cogsi will probably make his first cccam finished, the API probably Xcase suckt ....
Attached Files
File Type: zip OScam-SVN938monitor-AZbox.zip (246.5 KB, 0 views)
-
28.12.2009
OSCAM 0.99.4svn version, with build # 976 Web Interface
The port is set in the oscam.conf the [monitor].
THX koivo
-
Oscam Version 0.99.4svn, Build #1043 mit Webinterface und Smartreader Patch.
[monitor]
httpport = 88
httpuser =
httppwd =
httpcss =
httprefresh =
port = 988
aulow = 120
monlevel = 4
Gracias a koivo
-
OSCAM 0.99.4svn build #976 + mgcamd
OSCAM mit zugriff auf newcs und mgcamd als EMU
Anzupassen ist nur die datei oscam.server
Die Einstellungen sind für SKY (CAID 1702)
ACHTUNG!!! mit diesen Einstellungen werden keine EMMS gesendet,
bedeutet, die karte kann nicht aktiviert werden
Die 2 Ordner gehören in den Ordner /PLUGINS/OpenXCAS
die datei module.seq ist nur ein bsp wie es aussehn sollte
Für alle Dateien in den Ordnern oscam und mgcamd sind die Rechte 755 zu vergeben
-
oscam-svn 679azbox
-
oscam_azbox_v0.99.4_build_976_WI
-
oscam-0.99.4svn1103
Trunk 1103 without Webif and without any Patch.
oscam-0.99.4svn1103-AZHD.tar.gz
With Alno WebiF.
oscam-0[1].99.4svn1103-AZHD-plus-WebIF.tar.gz
-
oscam-0.99.4svn 1159
-
Oscam azbox v0.99.4 build_1159
-
OScam 1546 AZHD-no internal Reader-no WebIF
-
OScam UMP 1677 mit CCcam Server for testing
die oscam.conf muss angepasst werden, Beispiel:
[cccam]
port = 40000
version = 2.1.4
build = 3191
reshare = 2
Tnx derjuenger
-
Sky it working again, SVN 1599 SB Webif
-
Latest Oscam For AzboxHD
SVN 1641 incl. WebIF Alno
in der oscam.conf [global]
disablelog=0|1 default ist 0
-
SVN 1718 AZbox- of course no internal Reader in it, with WebIF Patch5a.
See Instructions for configuration
-
oscam-0.99.4svn1745-
-
oscam.0.99.4.svn1908ump-webif-linux-azbox
localize reader-common.c step 1
-
oscam.0.99.4.svn1908ump-webif-linux-azbox
localize reader-common.c step 1
-
oscam.0.99.4.svn 1920SB
-
azbox-0.9.4890
fixed standby lnb power issue
fixed configuration file
fixed recording problem
azbox-0.9.4890 (http://www.megaupload.com/?d=0S078KRQ)
-
Oscam build #2333 for AZboxHD
..only external cardreader, enjoy.
Ciao.
-
..last build from trunk, only external cardreader, enjoy.
-
oscam.0.99.4.svn2566
06/25/2010: Today
07:29 Changeset [2566] by schlocke
webif: fixed compiler warnings
06:27 Changeset [2565] by landlord
Documentation for new parameter 'cccwantemu'.
06/24/2010: Yesterday
22:46 Changeset [2564] by alno
WebIf: increased fieldsize for newcamd port
22:41 Changeset [2563] by alno
WebIf: Added/removed several cccam settings in reader and global config
21:35 Changeset [2562] by schlocke
cccam: removed cccbuild parameter because it's automaticaly set by version
21:03 Changeset [2561] by rorothetroll
fix some reset delay before ATR. ISO docs gives timing for reset and when …
18:44 Changeset [2560] by rorothetroll
added a delay parameter to the fast reset function than can control it
-
..build #2648 from trunk, only external cardreader
gracias a .:foggy:.
-
New Version 2850
only external cardreader
Thx Foggy
-
2871, builded with Webif and maybe
DVB API also working, need to be tested.
Its only a zipfile with binary in it.
Short start on AZHD, looks good for DVB API:
[OPENXCAS_API:Tue Jul 27 12:25:16.278] openxcas_open:285 ## oscamCAS
[OPENXCAS_API:Tue Jul 27 12:25:16.281] load_xcas_control:98 ## loaded controller
ID = 0x19760507
osdep_msq_server_open : key_request 0x62C4B094 key_response 0x62C4B095
key(62c4b094), msgflg(44
key(62c4b095), msgflg(44
osdep_msq_client_connect : key_request 0x62C4B094 key_response 0x2010/07/27 12:2
5:16 1072 c01 plain dvbapi-client 127.0.0.1 granted (anonymous, au=0)
62C4B095
2010/07/27 12:25:16 1071 p02 cccam(r) cccam client: sending own version: 2.1.
1, build: 2971
2010/07/27 12:25:16 1071 p02 cccam(r) cccam client: MSG_SRV_DATA (payload=72,
hex=4
2010/07/27 12:25:16 1071 p02 cccam(r) cccam client: srv CAB6C25070B54ED0 runn
ing v2.1.3 (3165)
Gracias a Schweinehüter
-
Changeset [2893] by schlocke
loop_resolver deactivated when Resolve Delay is 0
-
Oscam build #2916 with webif and dvbapi enabled
-
Changeset [2925] by rorothetroll
try to fix some issue with bad ecm sent by cccam for csat
-
Re: Oscam for AZbox HD
r2971 | schlocke | 2010-08-30 12:20:39 -0700 (Mon, 30 Aug 2010) | 2 lines
loadbalancer: finer specifying of errors
-
r2981 | alno | 2010-09-04 08:36:27 -0700 (Sat, 04 Sep 2010) | 1 line
removing empty brackets in log
------------------------------------------------------------------------
r2980 | rorothetroll | 2010-09-03 10:33:50 -0700 (Fri, 03 Sep 2010) | 1 line
new patch to save emm even if we block them
-
oscam-svn2987-mips-azbox
-
r2995 | schlocke | 2010-09-06 10:16:34 -0700 (Mon, 06 Sep 2010) | 2 lines
cccam: fixed warning
------------------------------------------------------------------------
r2994 | schlocke | 2010-09-06 09:27:18 -0700 (Mon, 06 Sep 2010) | 2 lines
cccam: fixed caid-check (test)
-
r3025 | merek | 2010-09-09 04:09:35 -0700 (Thu, 09 Sep 2010) | 1 line
Fix broken make
------------------------------------------------------------------------
r3024 | schlocke | 2010-09-09 02:09:43 -0700 (Thu, 09 Sep 2010) | 2 lines
dyndns: fixed resolving!
-
Changeset [3094] by dingo35
Removing ridx in reader since it is already in client
-
r3098 | dingo35 | 2010-09-19 23:44:45 -0700 (Sun, 19 Sep 2010) | 1 line
Fix for Nagra3 NA
------------------------------------------------------------------------
r3097 | rebdog | 2010-09-19 21:20:32 -0700 (Sun, 19 Sep 2010) | 1 line
store nds card description and baseyear in reader structure, and some small videoguard-reader logging changes
-
r3262 | alno | 2010-09-26 11:09:17 -0700 (Sun, 26 Sep 2010) | 1 line
WebIf: implement filter for 'not found' in reader statistics
------------------------------------------------------------------------
r3261 | alno | 2010-09-26 09:12:04 -0700 (Sun, 26 Sep 2010) | 1 line
WebIf: set mutex while reading stats
-
r3497 | alno | 2010-10-12 14:50:48 -0700 (Tue, 12 Oct 2010) | 1 line
WebIf: show same number in Statustable as in Log
------------------------------------------------------------------------
r3496 | alno | 2010-10-12 13:13:02 -0700 (Tue, 12 Oct 2010) | 1 line
Log: reformat Logmessages with client listposition, modifications on monitor status (THX @wonderdoc)
-
r3547 | schlocke | 2010-10-15 16:12:34 -0700 (Fri, 15 Oct 2010) | 2 lines
newcamd: au provider fix (0D05 Card/auprovid=000004)
------------------------------------------------------------------------
r3546 | schlocke | 2010-10-15 15:48:13 -0700 (Fri, 15 Oct 2010) | 2 lines
thread-cleanup now calls cccam-cleanup function
-
r3547 | schlocke | 2010-10-15 16:12:34 -0700 (Fri, 15 Oct 2010) | 2 lines
newcamd: au provider fix (0D05 Card/auprovid=000004)
------------------------------------------------------------------------
r3546 | schlocke | 2010-10-15 15:48:13 -0700 (Fri, 15 Oct 2010) | 2 lines
thread-cleanup now calls cccam-cleanup function
-
r3698 | dingo35 | 2010-10-23 12:04:50 -0700 (Sat, 23 Oct 2010) | 1 line
oscam.c Revert 3691 since workaround not necessary after fix in rev 3694
------------------------------------------------------------------------
r3697 | schlocke | 2010-10-23 10:07:46 -0700 (Sat, 23 Oct 2010) | 2 lines
loadbalancer: repaired...
-
r3760 | _network | 2010-10-28 13:04:36 -0700 (Thu, 28 Oct 2010) | 2 lines
print out thread handle on cs_dump()
------------------------------------------------------------------------
r3759 | rorothetroll | 2010-10-28 09:46:09 -0700 (Thu, 28 Oct 2010) | 1 line
added a mipsel toolchains file that match our cross compiler on the buld server
-
r3698 | dingo35 | 2010-10-23 12:04:50 -0700 (Sat, 23 Oct 2010) | 1 line
oscam.c Revert 3691 since workaround not necessary after fix in rev 3694
------------------------------------------------------------------------
r3697 | schlocke | 2010-10-23 10:07:46 -0700 (Sat, 23 Oct 2010) | 2 lines
loadbalancer: repaired...
-
r3547 | schlocke | 2010-10-15 16:12:34 -0700 (Fri, 15 Oct 2010) | 2 lines
newcamd: au provider fix (0D05 Card/auprovid=000004)
------------------------------------------------------------------------
r3546 | schlocke | 2010-10-15 15:48:13 -0700 (Fri, 15 Oct 2010) | 2 lines
thread-cleanup now calls cccam-cleanup function
-
r3760 | _network | 2010-10-28 13:04:36 -0700 (Thu, 28 Oct 2010) | 2 lines
print out thread handle on cs_dump()
------------------------------------------------------------------------
r3759 | rorothetroll | 2010-10-28 09:46:09 -0700 (Thu, 28 Oct 2010) | 1 line
added a mipsel toolchains file that match our cross compiler on the buld server
-
r3698 | dingo35 | 2010-10-23 12:04:50 -0700 (Sat, 23 Oct 2010) | 1 line
oscam.c Revert 3691 since workaround not necessary after fix in rev 3694
------------------------------------------------------------------------
r3697 | schlocke | 2010-10-23 10:07:46 -0700 (Sat, 23 Oct 2010) | 2 lines
loadbalancer: repaired...
-
r3760 | _network | 2010-10-28 13:04:36 -0700 (Thu, 28 Oct 2010) | 2 lines
print out thread handle on cs_dump()
------------------------------------------------------------------------
r3759 | rorothetroll | 2010-10-28 09:46:09 -0700 (Thu, 28 Oct 2010) | 1 line
added a mipsel toolchains file that match our cross compiler on the buld server
-
------------------------------------------------------------------------
r3784 | alno | 2010-10-31 02:37:12 -0700 (Sun, 31 Oct 2010) | 1 line
WebIf: add some logoutput on actions like kill, restart and reset stats
------------------------------------------------------------------------
r3783 | alno | 2010-10-31 01:42:37 -0700 (Sun, 31 Oct 2010) | 1 line
WebIf: try fix oscam segfault if httpdynds is used. Add getaddrinfo() depending of config. Please test.
-
r3844 | schlocke | 2010-11-06 13:59:05 -0700 (Sat, 06 Nov 2010) | 5 lines
cccam: card updates optimized, duplicate cards (same cards from
different servers) removed, showing dropped dup count in log
cccam: fixed a big ecm-queue-bug, also fixed fallback requests not
resend to the same server (caused some timeout problems)
------------------------------------------------------------------------
r3843 | alno | 2010-11-06 12:12:05 -0700 (Sat, 06 Nov 2010) | 1 line
WebIf: fix multiple DES key in newcamd config
-
r3852 | alno | 2010-11-08 06:54:21 -0800 (Mon, 08 Nov 2010) | 1 line
WebIf: add oscam.dvbapi to files section, disable reader from overview save to conf directly
------------------------------------------------------------------------
r3851 | alno | 2010-11-08 03:58:55 -0800 (Mon, 08 Nov 2010) | 1 line
WebIf: group reader stats 'not found'/ all other rc
-
3868 | schlocke | 2010-11-10 01:39:09 -0800 (Wed, 10 Nov 2010) | 2 lines
cccam: fixed client timeouts
-
r3876 | rorothetroll | 2010-11-10 15:03:07 -0800 (Wed, 10 Nov 2010) | 2 lines
reader-viaccess.c: fix potential aes key provider maping as we were using the SOID instead of ident as the parameter.
------------------------------------------------------------------------
r3875 | rorothetroll | 2010-11-10 14:29:07 -0800 (Wed, 10 Nov 2010) | 3 lines
reader-viaccess.c : move the test for long ecm number to the begining of the card init.
------------------------------------------------------------------------
-
r3900 | _network | 2010-11-13 15:51:23 -0800 (Sat, 13 Nov 2010) | 2 lines
io_serial: log timeout only as debug
------------------------------------------------------------------------
r3899 | _network | 2010-11-13 15:29:12 -0800 (Sat, 13 Nov 2010) | 2 lines
add some log messages in io_serial
-
r3905 | schlocke | 2010-11-14 13:06:43 -0800 (Sun, 14 Nov 2010) | 2 lines
cccam: filtered duplicate cards
------------------------------------------------------------------------
r3904 | schlocke | 2010-11-14 09:33:34 -0800 (Sun, 14 Nov 2010) | 2 lines
cccam: fixed small cardupdate bug
-
r3900 | _network | 2010-11-13 15:51:23 -0800 (Sat, 13 Nov 2010) | 2 lines
io_serial: log timeout only as debug
------------------------------------------------------------------------
r3899 | _network | 2010-11-13 15:29:12 -0800 (Sat, 13 Nov 2010) | 2 lines
add some log messages in io_serial
-
r3905 | schlocke | 2010-11-14 13:06:43 -0800 (Sun, 14 Nov 2010) | 2 lines
cccam: filtered duplicate cards
------------------------------------------------------------------------
r3904 | schlocke | 2010-11-14 09:33:34 -0800 (Sun, 14 Nov 2010) | 2 lines
cccam: fixed small cardupdate bug
-
Changeset [4826] by schlocke
cccam cccreshare parameter fix
oscam-1.00-trunk-svn4826-azbox-mips-dvbapi.rar
http://www.multiupload.com/ETW791SAVW
-
Changeset [4857] by schlocke lb stat saving and housekeeping executed in a separate thread
Changeset [4856] by schlocke small cache enhancement
Changeset [4855] by schlocke cache/distribute ecmcache check with better group handling
(http:// http://img855.imageshack.us/img855/8308/58475206.jpg ) (http:// http://depositfiles.com/files/5s08bvh7b)
-
Changeset [5458] by lareq78
in continue of 5453 ,try fixing renew cards with timeout
thanks pmanu
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/GT58J5Q00J)
-
Oscam svn5959
-oscam-svn5959-mips-azbox-webif-Distributio
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/83PAS34B2V)
-
18-11-2011
oscam-svn6030
oscam-svn6030-mips-azbox-webif-Distribution.tar.gz
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/U1AA3AVDAZ)
oscam-svn6030-mips-azbox-webif-libusb-Distribution.tar.gz
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/DHBY9PD0NG)
oscam-svn6030-mips-azbox-webif-libusb-pcsc-Distribution.tar.gz
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/MZ4V2K8NNS)
-
Oscam svn6070
-Changeset [6070] by corsair
autobetatunnel enhancement
thanks build-bot
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/V65SLJ3WAA)
-
Oscam AZBox 1.20-Rev.6460
------------------------------------------------------------
-Changeset [6460] by corsair
fixed a segfault applied patch "causes 100% CPU usage". Thx to pointer2!
-Changeset [6459] by oopepe
branch sc8in1: * more sc8in1/mcr fastmode testing
-Changeset [6458] by Deas
apply reworked patch by theparasol
-------------------------------------------------------------
For opensat firmware:
-In folder OpenXCAS is present file module.seq, need edit it
if you use others emu, remember to use symbol
# before the names of non-active emu
-In folder OpenXCAS/oscamCAS are present openxcas.conf
and others are only exemple files
-In folder OScam 1.20 is present new oscam file
to put in /PLUGINS/OpenXCAS/oscamCAS with chmod 755
Deposit Files (http://depositfiles.com/files/z9es9hbww)
-
OSCAM 1.20-unstable_svn build #6680
Author: gf
Log Message: module-dvbapi: Ignore empty lines in the config file.
Fully empty lines were not ignored and this resulted in
warnings like this:
Warning: line containing in oscam.dvbapi not recognized, ignoring line
This fixes ticket #2529.
Deposit Files (http://depositfiles.com/files/y7xrc5vq7)
-
oscam-1.20-unstable_svn6931-mi
Message: oscam-http-helpers: Fix warning seen in SSL build. The function needs to declare that it doesn't have parameters, otherwise the following warning is generated. In file included from oscam-http.c:13: oscam-http-helpers.c:936: warning: function declaration isn't a prototype oscam-http-helpers.c: In function 'SSL_Webif_Init': oscam-http-helpers.c:936: warning: old-style parameter declaration
DepositFiles (http://depositfiles.com/files/mhsq7idcl)
-
oscam-svn6979-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/dc4y01kyp)
-
oscam-svn6994-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/v5u5j86o6)
-
oscam-svn7224-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/nbdndpl6d)
-
oscam-svn7284-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/ugrqg0nv7)
-
oscam-svn7304-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/csovnxzqv)
-
oscam-svn7750-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/3yc7oqbf4)
-
oscam-svn7804-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/e4h5ia6v3)
-
oscam-svn7886-azbox-webif.tar.gz
http://depositfiles.com/files/o2psj1uxu
-
oscam-svn7938-azbox-webif.tar.gz
DepositFiles (http://depositfiles.com/files/dhfqx732k)
-
oscam-svn8025-azbox-webif.tar.g
DepositFiles (http://depositfiles.com/files/wer2mfngj)
-
oscam-svn8115-azbox-webif.tar.gz
http://depositfiles.com/files/n74x4ja4u (http://depositfiles.com/files/n74x4ja4u)
-
oscam-svn8246-azbox-webif.tar.gz
http://depositfiles.com/files/d72uqb0f4 (http://depositfiles.com/files/d72uqb0f4)