Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 230p for Clarke Tech 5000 HD Combo Plus
- Added adjustment step frequency during a blind search. To speed up the search, use step 16 or even 32. By Pass transponders with low SR total search time is much shorter. The band TP with SR = 27500 about 40M, so to save time, satellites popular providers better scan with increments of 16 or 32. For example, when installing step 16 for all channels of pluses, tricolor and the surface will be found for the BLIND, about 3 minutes !!!!!!
- Radically changed the management Povorotkoy mode spectrum. Now the step size of rotation using the menu control Diseqc 1.2, and, if pressed briefly takes place step by step movement, but if the button to the left-right to keep the motor goes into continuous motion. Stopping occurs when you release the button.
- Get back the function "Check Zalochku" all transponders in the window of the spectrum, start and stop the yellow button.
- Fixed Trouble with the soundtrack, the silent channels had or rescan the transponder again or call the menu and then exit.
- An experiment to equalize sound levels Dolby and conventional. If bad, it will return to the option as in 223.
Not has the Italian language in the menu
NOTE
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!