CardSharing-X
» Receivers « => Other HDTV Receivers => » HDTV « => Clarke-Tech HD => Topic started by: labud on February 12, 2010, 02:43:59 PM
-
EMU Firmware C-Tech HD for CTECH5000CPlus 213p
added support for the card TivĂąSat. mediaset_prem but can't tested
fixed s*k*y germany n*d*s*v13 smartcard
fixed D*igi*tv a*u
fixed,added something in c c c a m + n e w c a m d source
+++Yabbervox+++
-
15-02-10
1.added support CI Modul by DVB-T/TDT/DTT
1. hinzugefĂĽgt CI Modul UnterstĂĽtzung fĂĽr DVB-T/TDT/DT
-
S*l*Y*n**s***I smartcard***f_i_x_e_d ( but not tested )
HD+*N**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
ivu*sat*N*smartcard support added( but not tested )
Media*set*3*smartcard support added( but not tested )
+++Yabbervox+++
C-Tech 5000HD Combo 1.82p
-
S*l*Y*n**s***I smartcard***f_i_x_e_d ( but not tested )
HD+*N**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
ivu*sat*N*smartcard support added( but not tested )
Media*set*3*smartcard support added( but not tested )
+++Yabbervox+++
C-Tech 5000HD 1.82p
-
C-Tech 5000Combo+ 2.14p
S*l*Y*n**s***I smartcard***f_i_x_e_d ( but not tested )
HD+*N**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
ivu*sat*N*smartcard support added( but not tested )
Media*set*3*smartcard support added( but not tested )
+++Yabbervox+++
-
Firmw. for C-Tech 5000/5000C/5000P
EMU Firmware C-Tech HD (5000/5000C/plus)
S*k*Y*n*D*s***smartcard***f_i_x_e_d
HD+ fixed
-
EMU Firmware for C-Tech HD 5000CPlus 217p
No Read-me yet
+++Yabbervox+++
-
CTECH5000_185p
TiVu*sat***smartcard***updating+activation added > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
+++Yabbervox+++
http://www.2shared.com/file/12303484/5653a84f/CTECH5000_185p.html (http://www.2shared.com/file/12303484/5653a84f/CTECH5000_185p.html)
-
CTECH5000C_185p
TiVu*sat***smartcard***updating+activation added > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
+++Yabbervox+++
http://www.2shared.com/file/12303511/f6398dbe/CTECH5000C_185p.html (http://www.2shared.com/file/12303511/f6398dbe/CTECH5000C_185p.html)
-
Canal Digitaal fixed (NL)
CTECH5000_186. 30.03.10
http://www.multiupload.com/DGK3AZEKQ4 (http://www.multiupload.com/DGK3AZEKQ4)
CTECH5000C_186. 29.03.10
http://www.multiupload.com/4Z85LJCJPY (http://www.multiupload.com/4Z85LJCJPY)
-
Attention! New BOOTLOADER Ver. 4.50
1.Dynamic PMT fixed
2.Czech,French OSD language fixed
3.Timer recording fixed !Please, erase the file "TimerEventName.ten" which is on the harddisk !
4.CI module support expanded and improved
5.Recall button > recall history list.Now it is possible to see the list of latest watched channels
In menu OSD settings can set recall function on/off. In OFF mode the old recall function are back
6.Problems switching between different scrambled channels was solved
7.Problem with subtitles solved
>>> CTECH5000CPlus_220.zip <<< (http://www.storage.to/get/zY5bNnt2/5_4_CTECH5000CPlus_220.zip)
-
TiVu*sat***smartcard***updating+activation fixed > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
CS server parameter file upload/download;
Uploading / to store : In hidden menu 8281 > Press [GROUP] key on “Server List” menu.
Downloading: Go to “Main menu” > “Storage” > “Data Transfer”. Press [OK] key on the filename in the file list.
Server parameter file is a text file. You can edit it with any of text editor like windows “notepad.exe”.
Look pdf document !!
c c c a m fixed. Note: the c c c a m server displayed 2.0.11 ! But it is a patched 2.0.11 version !!
+++Yabbervox+++
CTECH5000CPlus_220p (http://www.multiupload.com/TI1SUJRWQ8)
-
CTECH5000C_190p.zip
- V*i*a*s*a*t N*D*S e m u OK > example NRK1 HD (4.8E) - C*a*n*a*l*D*i*g*i*t*a*l*N*L I*r*d*e*t*o 2 Ok, but at the moment fta - D*i*g*i tv only the rest of N2 are OK f i x e d support: - N*D*S S*k*y*I*t*a*l*i*a c*a*r*d*s - T*i*v*u*s*a*t c*a*r*d - HD*plus c*a*r*d solved problem with any via cards !
CTECH5000_190p.zip
- V*i*a*s*a*t N*D*S e m u OK > example NRK1 HD (4.8E) - C*a*n*a*l*D*i*g*i*t*a*l*N*L I*r*d*e*t*o 2 Ok, but at the moment fta - D*i*g*i tv only the rest of N2 are OK f i x e d support: - N*D*S S*k*y*I*t*a*l*i*a c*a*r*d*s - T*i*v*u*s*a*t c*a*r*d - HD*plus c*a*r*d solved problem with any via cards !
-
EMU Firmware F16 for C-Tech HD 5000C plus
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 228p for Clarke Tech 5000 HD Combo Plus
- Back lost on the road (227) LOOP, Dolby sound for now there just after boot cndf settings - no need to dumb pereskanivat channels ....
- New fonts, though, the Koreans mixed up lowercase letter d with a capital .... improvers Shoot! like only a hard line sign had to be repaired.
- Refresh the patch emu on: BisTV, Canal + NL
Not has the Italian language in the menu
Code:
NOTE: FW is not the usual team, so do not say "official" Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
-
1.patched:
- C*a*n*a*l*S*a*t + *B*i*S*T*V ( note: only model SD TV )
2.f_i_x_e_d support:
- T*N*T*S*a*t (
+++Yabbervox++
-
CTECH5000CPlus_228
release note
fixed :
-. timeshift problem fixed)
features
-. added extra functions in Datatransfer (more Details coming soon)
------------------------------------------------------------------------------------
folgende Probleme bearbeitet:
-. Timeshift
Neu:
-. Hinzugefügt > zusätzliche Funktionen im Daten Transfer (mehr Informationen in Kürze)
http://www.2shared.com/file/7rX-7aYo/5_4_CTECH5000CPlus_228.html (http://www.2shared.com/file/7rX-7aYo/5_4_CTECH5000CPlus_228.html)
-
Emu Firmw. 194p for C-Tech 5000S
1.patched:
- C*a*n*a*l*S*a*t + *B*i*S*T*V ( note: only model SD TV )
2.f_i_x_e_d support:
- T*N*T*S*a*t (
Many thank's to +++Yabbervox++
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 230p for Clarke Tech 5000 HD Combo Plus
- Added adjustment step frequency during a blind search. To speed up the search, use step 16 or even 32. By Pass transponders with low SR total search time is much shorter. The band TP with SR = 27500 about 40M, so to save time, satellites popular providers better scan with increments of 16 or 32. For example, when installing step 16 for all channels of pluses, tricolor and the surface will be found for the BLIND, about 3 minutes !!!!!!
- Radically changed the management Povorotkoy mode spectrum. Now the step size of rotation using the menu control Diseqc 1.2, and, if pressed briefly takes place step by step movement, but if the button to the left-right to keep the motor goes into continuous motion. Stopping occurs when you release the button.
- Get back the function "Check Zalochku" all transponders in the window of the spectrum, start and stop the yellow button.
- Fixed Trouble with the soundtrack, the silent channels had or rescan the transponder again or call the menu and then exit.
- An experiment to equalize sound levels Dolby and conventional. If bad, it will return to the option as in 223.
Not has the Italian language in the menu
NOTE
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 231p for Clarke Tech 5000 HD Combo Plus
- Fixed critical bug - Malfunctioning LOOP function. In shutdown mode the thermometer bug leads to excessive heating in the mode stendbay. Especially if the previous channel was switched off with the transponder with vertical polarization.
Not has the Italian language in the menu
NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Regards
VeRDe
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 235p for Clarke Tech 5000 HD Combo Plus
-Added a command to activate the card tricolor. It is necessary for the convenience of early use of the card. Map does not require a native wood-kam to activate and run in the Doctors reader. The emergence of markets an extensive party official maps of the Tricolor receivers GS8300, but separately and at a reasonable price (in Minsk, for example, 135ue. 600руб of them in the account to activate an annual subscription optimum) necessitated the addition of software Doctors able to activate these cards directly to the reader receiver. A nice addition compared with the use of these cards in inexpensive Chinese clones oupenov 820 is the ability to watch and package SUPER OPTIMUM from transponder 11,804 in DVB-S2 MPEG4 SD test mode. What many have noticed that the Doctor, as HD receivers, even if only slightly, but still gives Kartika on the LCD panel better than any SDshnikov plus hdmi digital output. An important advantage of such a kit is much more secure access to content providers than using connections to external cards, but in some cases only one possible. Of course full support for the exchange of cards Series 52 and others - also works.
Not has the Italian language in the menu!
NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
(http://pics.qip.ru/301mFeP.jpg)
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
F16_235p.html (http://www.2shared.com/file/FnHgB9Yw/F16_235p.html)
-
F16 New Firmware 237p for Clarke Tech 5000 HD Combo Plus
Not has the Italian language in the menu!
Code:
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
(http://pics.qip.ru/101mGl8.jpg)
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
-
- b*u*l*s*a*t
- c c c a m -> minor fixes
- DreCrypt -> minor fixes
- Via smartcard fixes
- BisTv minor fixes
-- Yabbervox --
-
- HD+ Card problem fixed for 5000/5000C
- TVGlobo(on Hotbird) fixed
-- Yabbervox --
-
- Added Polish language
- Added MHz steps in Blindscan menu
- Fastscan fixed
- Fixed some timer issues
- Automatic format swichting > V-format AUTO
- Added selection PAL / NTSC / AUTO in A/V setting menu
- Subtitles revised
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 239p for Clarke Tech 5000 HD Combo Plus
-No comment....
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
-
Old Today, 01:41 PM #1
kargo.25
kargo.25's Avatar
WS SPECIAL FRIEND
Join Date: Oct 2010
Posts: 45
Thanks: 5
Thanked 102 Times in 38 Posts
Users Flag!
Default EMU Firmware C-Tech HD (5000/5000C)
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 010p test for Clarke Tech 5000 HD Combo Plus
- This test software with the ability to remove RS232 log of work.
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
http://hotfile.com/dl/76366618/2e9bc55/F16_DreLog_010p.rar.html (http://hotfile.com/dl/76366618/2e9bc55/F16_DreLog_010p.rar.html)
-
Old Today, 01:41 PM #1
kargo.25
kargo.25's Avatar
WS SPECIAL FRIEND
Join Date: Oct 2010
Posts: 45
Thanks: 5
Thanked 102 Times in 38 Posts
Users Flag!
Default EMU Firmware C-Tech HD (5000/5000C)
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 010p test for Clarke Tech 5000 HD Combo Plus
- This test software with the ability to remove RS232 log of work.
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
http://hotfile.com/dl/76366618/2e9bc55/F16_DreLog_010p.rar.html (http://hotfile.com/dl/76366618/2e9bc55/F16_DreLog_010p.rar.html)
-
Old Today, 01:41 PM #1
kargo.25
kargo.25's Avatar
WS SPECIAL FRIEND
Join Date: Oct 2010
Posts: 45
Thanks: 5
Thanked 102 Times in 38 Posts
Users Flag!
Default EMU Firmware C-Tech HD (5000/5000C)
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 010p test for Clarke Tech 5000 HD Combo Plus
- This test software with the ability to remove RS232 log of work.
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
http://hotfile.com/dl/76366618/2e9bc55/F16_DreLog_010p.rar.html (http://hotfile.com/dl/76366618/2e9bc55/F16_DreLog_010p.rar.html)
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 241p for Clarke Tech 5000 HD Combo Plus
In the firmware test the following innovations:
- A new loader 500, allows you to unload not only the setting of the stick, but the very firmware.
- Unloading the setting of connections to external cards (CSinfo.txt) moved into the Software Update menu for convenience.
- Updated infobar (double-Info): a brief conclusion EPG is combined with the withdrawal of the extended EPG for ease of reading the contents of transmission.
- Updated default settings of satellites and transponders BISS keys (you need to reset all settings to the factory to start using them).
- Faster access to the menu, the green button - no annoying windows with warnings.
- Finalized mode Home balls through RS232: now uses a reliable manual selection mode receiver Master or Slave (Slave can be 6 doctors).
- Added selection algorithm with external cards in problem situations (by default, both the repeat is advisable to keep switched off to avoid the possibility of obtaining ban):
Retry = on / off (retry sending ECM after the end of time waiting for a response Timeout, with fast response and short time-out allows you to automatically detect the PID working or cid of several possible brute force with repetition);
Reloud = on / off (re-authorize the connection in case of failure on the server, it is useful when connecting to newcamd compatible server type mpcs, oscam .....)
- Amendments to working with Biss
- In the mode spectrum of the total added output signal power to quickly pre-assess the degree of targeting to the satellite.
- To further reduce response time to commands from the remote to navigate through the list of channels and on other menus. The doctor is a receiver with a really brisk menus.
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Regards VeRDe
-
New Firmware F16_242p for Clarke Tech 5000 HD Combo Plus
Changes:
- Access to the red button now right in the BISS keys editor
- Preliminary (before saving) BISS key check on the validity of an OK button, just select the row with a key, and click OK when the channel is opened in the background can be accessed from the list and move on to the next channel to Byss. Easier and faster to edit Haha ancient encoding from the remote, a full list of keys available in the menu unload-load on the USB as a text file with the keys.
- Added to the list of satellite providers of pre-sorted by a transponder, a so-called quick search provider, because why waste time deleting and editing, if you look supposed to ISP, not the whole Labuda, that is on satellite. This kind of search is particularly useful for beginners who are confused about the names of satellites and frequencies -
Choose from the list of satellites familiar name provider, scan, and immediately see - will appreciate the convenience!
- When recording a program broadcast EPG, but now you can read it on the GUIDE button in PVR menu list of records. "
Check option is available EPG announcement for each recorded transfer - will appreciate the convenience!
- New Fast algorithm for rendering the spectrum, which has now become more "alive"
- TV Guide is increased to 7 days, enough to wait and download it at least adds a new day in the list.
-
New Firmware F16_242p for Clarke Tech 5000 HD Combo Plus
Changes:
- Access to the red button now right in the BISS keys editor
- Preliminary (before saving) BISS key check on the validity of an OK button, just select the row with a key, and click OK when the channel is opened in the background can be accessed from the list and move on to the next channel to Byss. Easier and faster to edit Haha ancient encoding from the remote, a full list of keys available in the menu unload-load on the USB as a text file with the keys.
- Added to the list of satellite providers of pre-sorted by a transponder, a so-called quick search provider, because why waste time deleting and editing, if you look supposed to ISP, not the whole Labuda, that is on satellite. This kind of search is particularly useful for beginners who are confused about the names of satellites and frequencies -
Choose from the list of satellites familiar name provider, scan, and immediately see - will appreciate the convenience!
- When recording a program broadcast EPG, but now you can read it on the GUIDE button in PVR menu list of records. "
Check option is available EPG announcement for each recorded transfer - will appreciate the convenience!
- New Fast algorithm for rendering the spectrum, which has now become more "alive"
- TV Guide is increased to 7 days, enough to wait and download it at least adds a new day in the list.
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 243p for Clarke Tech 5000 HD Combo Plus
- Acceleration shustrosti drawing of the spectrum, a new style of displaying the signal, until finished.
- Ability to call mode spectrum of any signal from the installation menus and select the frequency transponder
- A new algorithm for checking the availability of a new transponder with a pre-existing in the base of the satellite
- Amendments to download and display the TV Guide in infobare (enhanced mode OSD) menu and STV.
- Added ability to automatically change the date of the transition up or down button with the most recent transfer of the day following the first and back.
- Increased memory for loading guide, should be enough for 7 days.
- When viewing a list of records is optimized mapping of the transfer of TV Guide, if it had during its recording.
- Search for air channels made into a separate menu
- Added transparency to the menu cards and external BISS keys - for operational control of decoding.
- Small correction in the algorithm of rekonekta compounds
- Other improvements.
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 245p for Clarke Tech 5000 HD Combo Plus
- Using a new algorithm works with curves servers (from a test 070p), a description of configuration options in the next topic. Should be more stable than the 214th.
- Restored the possibility of determining caid = 2600 for BISS channels on the yellow button
- The red button is now used for direct call editor BISS keys. The ability to edit keys of other encodings stayed during unloading-loading via USB text file *. key
Not has the Italian language in the menu!
NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 246p for Clarke Tech 5000 HD Combo Plus
- Finalization of the editor BISS keys
- Improved log data in detail komport status of the receiver with external cards.
- A small refinement of algorithms and reload retry
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 247p for Clarke Tech 5000 HD Combo Plus
- Repaired menu yellow button, broken with the 245p firmware. Now displays and BISS (caid = 2600) and is again the ability to manually bind the working RDA for faster channel switching time.
- Dorabotaka algorithms retry / reload. Now reload and the "right" time-out enable circumvention antikaskading constraints (useful for PVR functions).
-
Treiber/Bootloader update
--------------------------
Driver/Bootloader update
-
New Firmware F16_248p for Clarke Tech 5000 HD Combo Plus
Changes:
- Memory EPG increased to 8 days
- Improved OSD style and algorithm update EPG for current and next transmission.
- Changes in the mode spectrum (the most important information is now more evident than with the service).
- Fix the display of some letters of the Ukrainian language in STV, the channel name and records
- other improvements, carried over from 104 to F15 ...
(scale of signal quality in decibels still under refinement ...)
beta status
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 249p for Clarke Tech 5000 HD Combo Plus
-
New Firmware F16_250p for Clarke Tech 5000 HD Combo Plus
Changes:
- Insert new Cryptoworks keys (Astra 19.2E)
- Changes in the EPG, Infobar, Records List
-
O*R*F + A*U*S*T*R*I*A*S*A*T
+++by Yabbervox+++
-
- T*N*T support- B*u*l*s*a*t update O*R*F/A*u*s*t*r*i*a*s*a*t support
+++by Yabbervox+++
-
Clarke Tech 5000 HD F16 252p
NO info
http://www.multiupload.com/XTZQ4X0955
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 253pSE(second edition)for Clarke Tech 5000 HD Combo Plus
DOWNLOAD - F16_253pSE.zip (http://shrta.com/files/1TJRRXTX/F16_253pSE.zip)
-
02-04-2011
New Firmware F16_257p for Clarke Tech 5000 HD Combo Plus
Changes:
- The opportunity to connect the 2nd reader from F15, which are freely available.
DOWNLOAD - F16_257p.zip (http://shrta.com/files/1WJZJM51/F16_257p.zip)
-
25-05-2011
New Firmware F16_259p for Clarke Tech 5000 HD Combo Plus
Changes:
- Updating EMM for NTV + (fix problems from 20mA)
DOWNLOAD - F16_259p.rar (http://shrta.com/files/VBTO7ZTM/F16_259p.rar)
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 260p for Clarke Tech 5000 HD Combo Plus
- Added support for maps DRE3 (24y series, officially completed with GS8300N). There is activation, getting subscriptions, getting keys, decoding.
- Increased the length of the buffer to display the channel name -> now beautifully displayed even long names.
DOWNLOAD - F16_260p.rar (http://shrta.com/files/12AXZDQ1/F16_260p.rar)
-
Firmware 1.44 CT5100 C
no changelog
DOWNLOAD - CTECH5100C_144.zip (http://shrta.com/files/11QMTHP9/CTECH5100C_144.zip)
-
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 261p for Clarke Tech 5000 HD Combo Plus
-Flash-enabled group EMM card last year's 52nd series of the exchange (modified dre1). Should abdeytit keys on the base package directly into the reader.
Actual:
- Card Siberian Tricolor (there is already as much as 2 HD channels), in addition, a native of the receiver is set nevazhnetskie features and connecting it to a normal panel, its owner can look in the eyes of lohom his frie$$$. If the card is in the Doctor, here is another matter - all at once realize that life is good, a person understa$$$ and does not skimp on the quality of life.
- Card from the mpeg2 modules "in action", which today are walking in the markets of the central regions of Russia.
DOWNLOAD - F16_261p.rar (http://shrta.com/files/130H2O1R/F16_261p.rar)
-
Open AAF Prerelease 12/11/2011 ET 5X00
Remove Advertisement
et5x00 Image
Image information:
Image Information
Facts about the image:
As we invent the RAD is not so new and there are already great images for the receiver, we have taken on the basis of some already open class teams.
We would like here to thank you for your ever first-class work
what have you done in the past and what you have in the future
all makes. Without your homework and use there would be no OpenAAF image.
Thank you goes to:
* OpenPLi team
For the basic concept and the super integration of hardware models
* OpenVix team
Modding for the GUI and feature concept and the many small interesting ideas
* OpenEmbedded
Without their build environment, would not have been possible
* Opendreambox
The GUI
* Eopenplugins
This idea we have received with joy when we are also what one gets that far from us.
OpenAAF Image content:
* HbbTVSkin (DMConcinnity HD Mod Skin)
* HbbTVLite Skin (DMConcinnity HD Mod Skin)
* OpenAAF Panel
* Permanent timeshift
* Media Player
* Mod WebIf
* Keymap selection (Standard, Custom, neutrino follows)
* HDMI CEC
* DVD Player
* Setting the key assignment
* Own Plugin Feed
* Blue Panel (PPanel)
* GUI opacity altered
* Blind Scan
* Swap Manager
* PiconsAstra 19.2 and the German-language channels on Hotbird 13.0 (only ET9X00 and ET6X00)
* Fancontrol
* Current Settings Astra 19.2 and Hotbird 13.0, 23 and 28 degrees
* "Cool EPG" series
* Wireless drivers
* And much more ...
AAF Specials:
* Normal Skin Skin Lite and selectable in the menu (including 2nd infobar)
* ET Web browser on the feed (Only for ET9X00 and ET6X00!)
* Online update package with display
* Media Player WebIf
* Softcampanel in WebIf
* Own Feed (online updates are possible)
Standard color keys:
Blue Key short: Blue Panel (PPanel)
Blue Key length:
Red Key short HbbTV provided on the transmitter, otherwise the panel OpenAAF
Red Key long: When enabled, the panel Softcam
Yellow Key short audio settings
Yellow Key length:
Green Key short option channels where available, otherwise extensions
Green Key length: Aspect Ratio (Aspect Ratio)
Hardware:
Image are available for the following box:
Xtrend / ClarkTech
Image: et5x00
Box Model: ET5x00
Software:
Based on the basis of OpenPLi / openVix / opendreambox Fork as a separate
thus will be able to perform their own customizations and
implement our knowledge in the SH4 Mipsel environment.
Familiar with GUI enhancements and adjustments.
Deployment:
FEED own with the appropriate plugins will be ready at the beginning of the image.
Screenshots:
DMConcinnity HD Mod Skin Infobar
DMConcinnity HD-Skin-Mod Lite Infobar (ECM)
DMConcinnity HD-Skin-Mod Lite Infobar
Infobar Info
Main Menu
AAF panel
AAF panel extensions
AAF panel information
AAF Information
Software Manager
Security details
Key assignment settings
Extra adjustments
Network settings
Software Manager
Channel List
RedPanel
KeyMap selection
SoftCam settings
AAF panel system info
EPG settings
Network settings
VPS plugin
Web Interface
Web player
The team:
* Development
AAF DEV team: Special thanks goes to Captain, Black 64 and babsy98
* Beta Testing
AAF beta team: Special thanks goes to janojano, hu *** and dridrudradro
* Graphics and Design
xup
* Quality Control
NEIP
* Skins
Speedy1 and Krauss
Thank you to everyone who helped and
a special thanks to Clarkeboss.
Euer AAF Team
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/N9ZSCXVKOX)