CardSharing-X

» Receivers « => OTHER SAT-RECEIVERS => » Other Receivers « => Clarke-Tech => Topic started by: labud on September 22, 2009, 05:06:21 PM

Title: Firmware Clarke-Tech
Post by: labud on September 22, 2009, 05:06:21 PM

(http://i22.servimg.com/u/f22/11/42/95/92/sign_t10.gif)

Firmware Clarke-Tech

Title: Re: Firmware Clarke-Tech
Post by: labud on September 22, 2009, 05:14:51 PM

Digi Tv nagra2 AU Fixed 22.09.09
RAI Seca Fixed

Title: Re: Firmware Clarke-Tech
Post by: labud on November 14, 2009, 12:42:11 AM

Clark-Tech Firmware

New fw 204 for C-Tech5000C Plus with EMU

Release notes:

- Added cccam client
- Fixed emu JSC sports on Nilesat
- DigiTv on Thor
- TvGlobo on Hotbird
- RAI on Hotbird (by softcam seca key)
- KingSton on Sirius
- SABC on Intelsat 902,KDG

Update steps!!

1.Download software first wait until reboots.
2.Download module_002p wait until reboots.
3 Save your settings by USB or rs232
4.Make a factory reset and switch OFF (maunpower switch on the rear)the receiver for around 1 minute.
5.Receiver again turn on ,make an auto channel scan or upload the saved settings and make auto channel scan to upgrade the channellist etc...

Now you can also used hidden menu 8281 !!
More info about 8281 in the pdf document !

Info about new s/w core(Ver. 2.0x for HD5000c plus

1. Two channels recording at the same time and another channel watching.
2. Even though they are encrypted channels, they will be descrambled simultaneously.
3. During recording or watching satellite channels, the terrestrial channels can be watched or recorded, and vice versa.
4. In case of simulcrypted channels, all ecm’s of each slot (cards/cs/sssp/emu) will be processed in parallel, so that the channel open time will be shorter than old versions.
The old core tried ecm’s one by one in every 3 sec, so that at the worst case the channel open time is very long.
And they do not process all possible ecm’s, so some channels does not open.)
5. The size of old core software is very big. No more free space in flash memory to add the new features.
In this case the new software is compressed to half size and the booting time is same as old one.

++Yabbervox++



http://www.zshare.net/download/684295994bf18860/ (http://www.zshare.net/download/684295994bf18860/)

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 01, 2009, 01:39:09 PM

Changelog-Version 2.05

folgende Probleme gelöst
- Sky Deutschland > Multifeed Optionstaste/Unterkanäle
- Einstellung HDMI-Dolby speichern
- Audiospurwechsel bei Senderwechsel
- falsche Startzeit über Timer
- nach Ende der Timeraufnahme zurückgehen in Standby Modus
- Blindscan, Frequenzbereich einstellen

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 01, 2009, 07:21:55 PM

emu-firmware für den clarke tech 5000 combo plus

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 01, 2009, 07:23:51 PM

die erste emu-firmware für den clarke tech 5100 combo plus

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 01, 2009, 08:46:50 PM

die erste emu firmware für den clarke tech 6600 sst

Title: Re: Firmware Clarke-Tech
Post by: labud on December 14, 2009, 01:01:10 PM

New firmware for CTech 14.12.2009




S@y *** Smartcard Fix

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 14, 2009, 09:20:58 PM

S*k*Y*n*D*s***smartcard***f_i_x_e_d +++Yabbervox+++

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 14, 2009, 09:25:47 PM

S*k*Y*n*D*s***smartcard***f_i_x_e_d +++Yabbervox+++

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on December 14, 2009, 09:27:00 PM

S*k*Y*n*D*s***smartcard***f_i_x_e_d +++Yabbervox+++

Title: Firmware Clarke-Tech CCCam with CT5000 (no +).
Post by: labud on December 24, 2009, 07:15:06 AM

CCCam with CT5000 (no +).
You can do this with this latest software.

Code: You are not allowed to view links. Register or Login

FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System



CS Cards Client supported:
CCCam (TCP)
Newcamd (TCP)
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)
Gbox client (localhost only, default ports)



CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



Support:
- Ethernet (linux box, diablo wifi,...)
- Box Serial Connection (SSSP/HSIC/TM SHARE)
- Season Interface (Cams/box Readers)
- Diablo Wireless (base unit)



Main Functions:
- Emulator
- Logger
- Net client
- Card server
- Cards support
- DVB Plugins (without pctv card)





Version 1.41 (23/12/2009)

For the first time joined Fausto For Linux Wine (worked too with windows os)

- Emulator
*Monitor: Popup Menu (mouse right clic)
- Added FeKid manual Load
- Added FeKid auto load at startup (under Auto Functions)

*Card Support:
Added Sky Ita Fix (0919/093B)

*DVB Plugins:
Code improved, better reply on caid/Prids filtered, datas logged modified
New Viaccess hack 2.6 working (caid:0500/Provider:023B00 on horbird with vplug)

*Card Client:
-Added Extented ECM/EMM Log window -> When client started, double clic on ECM/EMM log Window
To back to normal window log, double clic again on original log window (on emulator window)
-Added option CCCam server version/build on line definition (report to FaustoClients Example.cfg for details)
-Added option CCCam MAXID (report to FaustoClients Example.cfg for details)
-CCCam improved (better again)

*Card server:
-Newcamd better connection compatibility & accounts managment modified
-Added option TIMEOUT (Report to file FaustoServers Example.Cfg for details)
-Added option EMMBLOCKER (Report to file FaustoServers Example.Cfg for details)
-Added Extented ECM/EMM Log window -> When server start, double clic on ECM/EMM log Window
To back to normal window log, double clic again on original log window (on emulator window)

*Serial:
- Added Truman Share support (Now avalaible SSSP/HSIC/TM Share)

*Season Interface:
Emulation Conax:
Boot Sequence code improved -> accruate compatibilities with conax embedded reader
Emulation 1rd3t0:
- Multiple caids/prids can be used for same coding system
Report to Season.ini joined for changes
Possible to change the datas on fly
Clic on Tab Setup
Select file Season.ini
Made changes
Press saves button
New changes apply without re init season

*Extra
Added new datas on language files

Have Fun,
Cactus Jack

Have Fun,
ronald68
Code:

http://www.zshare.net/download/70294314d5230689/ (http://[url=http://www.zshare.net/download/70294314d5230689/)]Download[/url]

Title: firmware for CTech Family
Post by: antox on December 28, 2009, 09:27:07 PM

New firmware for CTech Family
New firmware for CTech Family

Code: You are not allowed to view links. Register or Login

http://www.2shared.com/file/10303038/2c87845a/CTECH1500_233p_20091214.html
[url]http://www.2shared.com/file/10303054/736b6ff7/CTECH1500Plus_185p_20091214.html[/url]
[url]http://www.2shared.com/file/10303080/c1a8d5a3/CTECH2000_226p_20091214.html[/url]
[url]http://www.2shared.com/file/10303098/d6686cd0/CTECH2100_233p_20091214.html[/url]
[url]http://www.2shared.com/file/10303120/3a85571e/CTECH2100Plus_185p_20091214.html[/url]

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on January 01, 2010, 08:03:31 PM

FW CT 2100 Plus/USB

Clarke Tech 2100 Plus SSSP Unterst?tzung

CS funktioniert

Title: Re: Firmware Clarke-Tech
Post by: antox on January 11, 2010, 04:50:23 PM

CTECH5000CPlus_208p

Title: Re: Firmware Clarke-Tech
Post by: antox on January 11, 2010, 04:59:32 PM

CTECH5100C_105p

Title: Re: Firmware Clarke-Tech
Post by: antox on January 11, 2010, 05:13:43 PM

 Firmware Clarke-Tech

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on January 20, 2010, 09:02:19 PM

New Original Firmware 125 for C-Tech 2000

- driver update

Attention: If Update by rs232, use ctechup 1.9.3 !

Title: Re: Firmware Clarke-Tech
Post by: antox on January 21, 2010, 09:21:54 AM

S*C*T 11727 HB e m u fixed
Patches for Clarke-Tech (2500-3100& plus)
+++Yabbervox+++

Title: Re: Firmware Clarke-Tech
Post by: antox on January 21, 2010, 09:34:55 AM

Patches for Clarke-Tech (1500-2100-2000 & plus)
S*C*T 11727 HB e m u fixed

+++Yabbervox+++

Title: Re: Firmware Clarke-Tech
Post by: elcardinal74 on January 21, 2010, 11:10:11 AM

FW CT 2100 Plus/USB
CTECH2100Plus_131_20100108

Title: Re: Firmware Clarke-Tech
Post by: antox on January 25, 2010, 10:18:57 AM

ART&BISTV&JSC_SPORTS Hotbird
Hotbird
ART 11240V,12015H
JSC Sport 11296H
BisTV 11681H,11411H,11681H,12692H
+++Yabbervox+++

Code: You are not allowed to view links. Register or Login

http://www.2shared.com/file/10887419/bb6a52c7/CTECH1500Plus_188p_20100125.html
[url]http://www.2shared.com/file/10887423/7092e81a/CTECH2000_229p_20100125.html[/url]
[url]http://www.2shared.com/file/10887433/6989d95b/CTECH2100Plus_188p_20100125.html[/url]
[url]http://www.2shared.com/file/10887445/cfabeaa9/CTECH2500Plus_149p_20100125.html[/url]
[url]http://www.2shared.com/file/10887450/a6da2f67/CTECH3100Plus_149p_20100125.html[/url]

Title: Re: Firmware Clarke-Tech
Post by: labud on January 25, 2010, 12:16:12 PM

Nuovi EMU FW for CT 2000 - 1500/2100/2500/3100 plus


CT 2000 - 229P
CT 1500 plus - 188P
CT 2100 plus - 188P
CT 2500 plus - 149P
CT 3100 plus - 149P



Luce su
ART&BISTV&JSC_SPORTS Hotbird
Hotbird
ART 11240V,12015H
JSC Sport 11296H
BisTV 11681H,11411H,11681H,12692H



(http://wwwstatic.megaupload.com/gui2/logo.gif) (http://www.megaupload.com/?d=49YLGE4H)

Title: Re: Firmware Clarke-Tech
Post by: antox on February 05, 2010, 12:27:05 PM

aggiunto supporto per la card Tivù
added support for the card T iv ù
fixed s*k*y germany n*d*s*v13 smartcard
fixed D*igi*tv a*u
+++Yabbervox+++

Code: You are not allowed to view links. Register or Login

• [url]http://www.2shared.com/file/11136619/f6fa8aa1/CTECH1500_237p_20100205.html[/url]
• [url]http://www.2shared.com/file/11136635/cd7aa408/CTECH1500Plus_190p_20100205.html[/url]
• [url]http://www.2shared.com/file/11136645/823b32cf/CTECH2000_231p_20100205.html[/url]
• [url]http://www.2shared.com/file/11136666/290401f7/CTECH2100_237p_20100205.html[/url]
• [url]http://www.2shared.com/file/11136692/a9f1d921/CTECH2100Plus_190p_20100205.html[/url]
• [url]http://www.2shared.com/file/11136714/89899c2b/CTECH2500Plus_151p_20100205.html[/url]
• [url]http://www.2shared.com/file/11136728/ab1283c3/CTECH3100Plus_151p_20100205.html[/url]

Title: Re: Firmware Clarke-Tech
Post by: labud on February 16, 2010, 04:42:47 AM

Original firmawer 15/02/2010


release note:

1.added support CI Modul by DVB-T/TDT/DTT

1. hinzugefügt CI Modul Unterstützung für DVB-T/TDT/DTT

5_4_CTECH5000CPlus_213.zip

http://www.megaupload.com/?d=1KE9U7LP (http://www.megaupload.com/?d=1KE9U7LP)

5_4_CTECH5100C_110.zip

http://www.megaupload.com/?d=Q0YC5QGW (http://www.megaupload.com/?d=Q0YC5QGW)

5_4_CTECH6600SST_110.zip


http://www.megaupload.com/?d=29O3B8QF (http://www.megaupload.com/?d=29O3B8QF)

Title: Re: Firmware Clarke-Tech
Post by: labud on March 27, 2010, 05:59:44 AM

Latest Clarke-Tech (5000/5000C) Firmware
New firm ct hd fix tvsat (26.3.2010) TiVu*sat***smartcard***updating+activation added > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
+++Yabbervox+++

Title: Re: Firmware Clarke-Tech
Post by: hilton on March 30, 2010, 05:05:39 PM

30-03-10


Fix CanaalDigitaal NL Ned.1 HD.

Title: Re: Firmware Clarke-Tech
Post by: labud on July 03, 2010, 08:59:19 AM

New Original fw 228 for C-Tech 5000-Combo Plus

release note

fixed :

- timeshift problem fixed

features:

- added extra functions in Datatransfer (more Details coming soon)

Title: Re: Firmware Clarke-Tech
Post by: labud on July 15, 2010, 06:38:25 AM

New Original Firmware V150 For C-Tech SFP2010

Quote:
changelog

Version 1.50:
added Spanish language

Version 1.49:
- Fix NIT Refresh
- Delete HD TP.
- Fix Upgrade Failed.

Version 1.48:
- Fix NIT and SAT found;


Version 1.47:

- fullscreen added.
- in Play movie added Key for jump play and hide message

[UP]:JUMP [DOWN]:HIDE [MENU]:INFO [EXIT]:EXIT


- add DiseqC 1.1 search in DiseqC Search Menu;
- Update SAT TP List.
- Release edit satmeter settings Tool by PC.

Version 1.46:
added Dutch languag

Title: Re: Firmware Clarke-Tech
Post by: labud on July 29, 2010, 04:28:04 PM

F16 New Firmware 235p for Clarke Tech 5000 HD Combo Plus


(http://i32.tinypic.com/33yomyg.jpg)


-Added a command to activate the card tricolor. It is necessary for the convenience of early use of the card. Map does not require a native wood-kam to activate and run in the Doctors reader. The emergence of markets an extensive party official maps of the Tricolor receivers GS8300, but separately and at a reasonable price (in Minsk, for example, 135ue. 600руб of them in the account to activate an annual subscription optimum) necessitated the addition of software Doctors able to activate these cards directly to the reader receiver. A nice addition compared with the use of these cards in inexpensive Chinese clones oupenov 820 is the ability to watch and package SUPER OPTIMUM from transponder 11,804 in DVB-S2 MPEG4 SD test mode. What many have noticed that the Doctor, as HD receivers, even if only slightly, but still gives Kartika on the LCD panel better than any SDshnikov plus hdmi digital output. An important advantage of such a kit is much more secure access to content providers than using connections to external cards, but in some cases only one possible. Of course full support for the exchange of cards Series 52 and others - also works.

Not has the Italian language in the menu!

NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

Title: Re: Firmware Clarke-Tech
Post by: aamir11 on August 18, 2010, 01:50:32 PM

EMU Firmware C-Tech 161p (2500plus/3100plus)

- Added Bulsat 39°E

-- Yabbervox --

CTECH2500Plus_161p_20100818.zip (http://www.multiupload.com/NOYSIA8QVX)
CTECH3100Plus_161p_20100818.zip (http://www.multiupload.com/K3RZ77XQTQ)

Title: Re: Firmware Clarke-Tech
Post by: labud on August 21, 2010, 06:47:56 AM

- HD+ Card problem fixed for 5000/5000C
- TVGlobo(on Hotbird) fixed

-- Yabbervox --