CardSharing-X
» Receivers « => Dreambox files => » DREAMBOX ZONE « => Dreambox Tools => Topic started by: Ex-Yu on October 23, 2009, 03:51:49 PM
-
DreamBoxEdit-3.0.0.0
software to install list favorite enigma 1 and 2
-
(http://dreamboxedit.digsat.net/images/non_website/screen-dbe-3-01.gif)
Changes in version 3.00.00:
* New version developed and maintained by DreamBoxEdit development team hosted at www.digsat.net (http://www.digsat.net) Adapted from DreamBoxEdit by Llamaware (tm)
DreamBoxEdit development team: HappyLlama, Henksat, Talius, Tammie78N, Jazzydane
* Support added for version 4 lamedb. Lamedb version 4 is used by Enigma2 images using drivers after august 2008
* Support for HDTV services. In the Advanced pane of DreamBoxEdit Options you can add HDTV services to be treat as TV-channels
* New logo by Litemotiv
* A number of small enhancements in the functioning of DreamBoxEdit
Tips with the 7025/800:
* In DreamBoxEdit you must specify the correct paths on the 7025/800.
You can do this very easy with the "Version 3 Settings(enigma2)" and "New Enigma2 settings" buttons on the options panel.
New lamedb version 4 is chosen with the "New Enigma2 settings" button.
* You have to enable "Multibouquet" on settings menu in the actual 7025/800 Dreambox in order to be able to see your bouquets
Known bugs in version 3.00.00:
* Translation problem with Satcodx files: servicenames with special characters are not correctly translated (but can be editted by hand of cour
-
DreamBoxEdit-3.0.0.0-Multi_Language kosta.
-
DreamBoxEdit Mod s-e-t
02.04.2010
DreamBoxEdit creates default values for all options.
It's important however to check the various settings on the options panel.
The most important setting is the profile for a Dreambox that specifies both:
- the network settings needed to contact the Dreambox, and
- the paths where the settings reside on the Dreambox. Those paths must be specified
correctly. They vary with the different types of Dreamboxes (satellite, cable, 7025 etc.).
On the options panel you can set them to the default for a specific type of Dreambox.
Tips and known issues with the 7025:
- In DreamBoxEdit you must specify the correct paths on the 7025. You can do this
very easy with the "Defaults for 7025" button on the options panel.
- You have to enable "Multibouquet" on the 7025 in order to be able to see your bouquets.
- The DreamBoxEdit ZAP command fails because the 7025 webinterface does not yet support this command.
Multilanguage
17 languages
(http://www.sat-universe.com/attachment.php?attachmentid=204918&stc=1&thumb=1&d=1270358589)
-
DreamBoxEdit-IHAD Edition
DreamBoxEdit_3.0.0.1
Having now tried unsuccessfully for months a developer of the Source Forge project for the Dreambox settings editor DreamBoxEdit have reached, I decided to make some changes themselves.
The project apparently no one seems to care more about there ...
What was fixed in since version 3.0.0.0:
- The display of the FEC in the editor and main window has been the missing values for extended FEC DVB-S2.
- The editor now works again satellites.xml
Changelog:
----------
3.0.0.1:
- fixed FEC values for DVB-S/DVB-S2 modes
- restored satellites.xml editor function
-
How to install a DreamBoxEdit language pack:
- just put the language file(s) in the directory
on your PC DreamBoxEdit runs from.
The new language will immediately become visible when
you select 'Language' on the menubar.
-
DreamBoxEdit_3.0.0.2
3.0.0.2
- restored zap function for enigma2
- changed menu bar icons
-
DreamBoxEdit 3.0.0.3
3.0.0.3
- fixed scrollbar issue
Thx dhwz
-
DreamBoxEdit 3.0.0.4
3.0.0.4
- fixed error message after enigma2 settings reload
- servicename filter added
-
DreamBoxEdit v.3.0.0.5
- removed settings-type 3 from options panel (no longer
needed all E2-Boxes working with settings-type 4)
- added button with terrestrial path settings (E1) to options panel
- fixed settings-type switching via menu -> tools -> toggle
between version 2 and 4 settings
- added language files (crnogorski, czech, dansk, espanol, francais, greek,
hrvatski, italiano, magyar, nederlands, norsk, polish, russian, srpski, svenska,
turkce, ukrainian)
- added language tool for translations (you can find it in the installation folder),
please send me your language file updates on the support forum, thanks!
-
Updated Maltese/English Version
Thx to pedro
-
DreamBoxEdit v.3.0.0.6
- disabled SatcoDX import/export as this feature is deprecated,
website of SatcoDX is down
- improved servicename filter, now it matches all services,
the old one missed some (e.g. RTL Television on 19.2°E)
- sorting of columns with drag&drop is now possible (no saving at the moment)
- fixed update check
- added column for DVB-system
- added column for modulation (now it's possible to remove all DVB-S2
transponders after conversion from E2 to E1 very easily)
-
DreamBoxEdit-IHAD Edition 3.0.1.0
DreamBoxEdit-IHAD Edition
Changelog:
3.0.1.0
- added display of currently active service on your dreambox (enimga2 only)
- added volume control (enigma2 only)
- added malti language file, other language files updated
- fixed error message when comparing loaded services with services on dreambox/disk
- added button for special services (service types 130, 133 and 211) in the options panel
(you need a patched Channelselection.py to make this channels visible on Enigma2)
- added service type 10 to standard radio types
- small GUI changes
-
DreamBoxEdit setup 3.0.1.1
3.0.1.1
- fixed network timeout issue when IP address is not reachable
- fixed editing and saving of negative AC3 and PCM delays
(note: you have to delete all extra parameters in the detail panel if you have entered any delay values before)
- fixed error message after saving and opening new settings
- added customizable row color
- new window and button styles
- all message dialog buttons were german, message dialogs can't be translated, changed locale to English
-
Italian language file of DreamBoxEdit 3.0.1.1.
-
DreamBoxEdit_setup_3.0.1.2
Changelog:
3.0.1.2
- fixed overlapping text in translated popup menus
- fixed some not translated shortcuts in popup menus
- fixed language files
- fixed error message when uploading settings without opening them before
- another network timeout fix
- option to deactivate automatic display of currently active service and volume control
- optional use of the old window style, if you remove/rename DreamBoxEdit.exe.manifest from install folder
- improved satellites.xml editor, now fully functional editing for enigma2 and synchronisation with loaded settings
Thx dhwz
-
DreamBoxEdit setup_3.0.1.3
Changelog:
3.0.1.3
- fixed problem with FTP mode, Quick FTP commands were sent
- fixed problem with Quick FTP mode, now standard reload command is sent instead of killall -9 enigma2
- fixed problem with directory selection window, now it always jumps to the last used directory
- small GUI changes
-
DreamBoxEdit-IHAD Edition 3.0.1.4
- fix for satellites.xml with twisted parameters
- fixed gui for low resolutions
- some language file updates
-
DreamBoxEdit 3.0.15
Changes:
- automatic renaming of invalid bouquets on Enigma2->Enigma1 conversion
- support for Enigma2 alternative services (only download/upload)
- added confirmation question before modification of satellites.xml
- display of currently active service is now disabled by default, but can be enabled in options panel
(Note: if you experience any problems when running DreamBoxEdit and your Dreambox is offline, just disable that option again)
-
DreamBox Edit 3.0.1.6
Changelog:
3.0.1.6
- after changing service type to TV, the text still showed the old service type
- fixed wrong bouquet type flag for radio bouquets
- filter for DVB-S/DVB-S2 added
-
DreamBoxEdit-IHAD Edition 3.0.1.7
Quote:
Changelog:
3.0.1.7
- fixed problem with user bouquet import
- support for Enigma2 user bouquet parental lock
- small GUI fixes
-
DreamBox Edit for MAC OS users
29.08.2010
Here is the DreamBox Edit software for the MAC OS user.
This is only a beta version.
To excract the file in rar you should use a STUFFIT EXPANDER
To run this softawre you must use MAC operating system
Download - DreamBox Edit for MAC OS users
http://www.megaupload.com/?d=9L8YQTS0 (http://www.megaupload.com/?d=9L8YQTS0)
-
DreamBoxEdit-IHAD Edition 3.0.2.0
Quote:
3.0.2.0
- added DVB-S2 transponder data editing
- added DVB-S2 export/import
- added support for circular polarisation
- fixed re-import of exported services and bouquet files
- fixed export of renamed services
- fixed satellites.xml update function
- fixed some missing translations
- language files updated
- code cleanup
Attached Thumbnails
Click image for larger version Name: web.jpg Views: 3 Size: 56.9 KB ID: 233859 Click image for larger version Name: ctry_usage_201008.png Views: 4 Size: 5.3 KB ID: 233860
-
DreamboxEdit-Mac-Version 3020
DreamBox Edit software for the MAC OS user.
This is only a beta version.
To excract the file in rar you should use a STUFFIT EXPANDER
To run this softawre you must use MAC operating system
http://www.megaupload.com/?d=BTNVHUNZ (http://www.megaupload.com/?d=BTNVHUNZ)
-
DreamBoxEdit-IHAD Edition 3.0.2.0
3.0.2.0
- added DVB-S2 transponder data editing
- added DVB-S2 export/import
- added support for circular polarisation
- fixed re-import of exported services and bouquet files
- fixed export of renamed services
- fixed satellites.xml update function
- fixed some missing translations
- language files updated
- code cleanup
-
Changelog:
3.0.3.0
Code:
- DVB-C symbolrate is now displayed in main window
- all frequencies in the main window are now displayed in MHz
- all symbolrates in the main window are now displayed in well known formats
e.g. for satellite 27500 instead of 27500000, for cable 6900 instead of 6900000
- added support for "new channel" flag of your dreambox (flag can be set or removed in service details)
Note: There are two different new channel flags
the first the one is the old "New" flag (now "X") which is set when using "Mark services not in Userbouquets with X"
option in context menu
the second one is the "N" flag which is set by your dreambox when a new channel is found by the service scan
- added option to remove all "N" and "X" flags in tools menu
- changed option in context menu to remove "N" and "X" flags from selected services
- fixed problems when using the compare functions
- fixed problem with missing DVB-system and modulation when using cut and paste
- fixed problem when removing empty markers
- added support for parameter c:09 (subtitle) for Enigma1
- finally fixed missing scrollbar issue
-
DreamBoxEdit-IHAD Edition 3.1.0.0
Changelog:
3.1.0.0
- fixed problem when using cut and paste with cable or terrestrial services
- fixed cut and paste which filled empty fields with 0
- fixed compare function, the internal service counter wasn't reset when the operation was canceled
- fixed a problem when option "show all service details in the services list" was disabled
- fixed error message when rolloff or pilot is missing in lamedb for DVB-S2 transponders
- fixed namespace calculation for Enigma2
- fixed error message in details and transponder edit window with Enigma1 settings
- fixed bouquets.tv and bouquets.radio which are now written in proper settings-type 4 format
- disabled renaming of markers, use the edit marker text option in context menu
- improved satellites.xml update
- added full Engima2 alternatives support
- added option "Don't save backup files" (this option will also remove existing backups from save directory)
- added cleanup function for save directory which removes all unneeded files
- added display of reference picons (format 71x53) in bouquets and in service details window
- added option to enable/disable picons in bouquets panel
-
3.1.0.1
- fixed problem with bouquet selection panel
- added selectable picon format (100x60, 71x53, 70x53)
- added autoresize for picons if format doesn't match selection
- now uses another library for picons to speedup picon loading
-
DreamBoxEdit-IHAD Edition 3.1.0.2
Changelog:
3.1.0.2
- fixed total service counter was overlapped by displayed service counter if bouquet panel size was changed
- fixed application hung if you tried to drag&drop a service in user bouquet to the same position
- fixed flickering hint in details list
- fixed sorting of alternatives is now possible, first service in row is the primary service
- fixed some missing translations
- changed algorithm for generation of alternatives filename
- changed to a good quality picon resizing algorithm
- added picon size 40x30 (downsizing for 71x53 and 70x53) and 40x24 (downsizing for 100x60) in options panel,
40x30 is the default size now, all picons are resized to this size for smaller picons in user details list,
if you like to see the picons in its original size just select the proper size in options panel
-
iDreamX version 2.0.3.1b
24/09/2010
Code:
Satellite Finder Tool:
- Added new. (Menu: Tools / Sat Finder) Displays the following values:
• SNR (Signal to Noise) = signal to noise ratio
• AGC (Automatic Gain Control) = Automatic Gain Control
• be BER (Bit Error Rate) = bit error rate (must be always 0)
- Big Screen
The values appear very large (for ease of adjusting the satellite dish
(Will click through to the [SNR shown] button)
Save time shift tool (only enigma2)
- In the tool menu, added.
(Saves the current time-shift recording in a movie directory)
Plugin-tool (only enigma2)
- In the Tool menu and the Control-Tab added.
(Easy to install enigma2 plugins)
Control Tool
- [Record] - Button added.
Enigma1:
"Start Recording" (Starts recording open-ended)
"Stop Recording" (Ends the recording)
enigma2:
"Record current event" (Starts recording the current program)
"Record invinite (10h)" (Starts recording for ten hours)
(To be deleted premature stop the recording, the corresponding timer entry)
Movie Tool:
- In the context menu: "Zap box" added
(The selected movie starts on the box)
- Keyboard Shortcut added:
• [R] - Movie-List Reload
Telnet Tool:
- Added [Execute] button.
(Run the command in the input field - has the same function as the [Return] key)
- Button: [start Telnet] added a context menu
· "Start telnet session"
· "Start telnet session in Terminal"
· "Open new window telnet"
· "Start FTP session"
- GUI redesigned
EPG Tool:
- Button: added [Similar] (only enigma2)
(Looks for similar items as those selected in the EPG list)
- Context menu: "Search Similar ..." added (only enigma2)
(Same function as [Similar] button)
- Keyboard Shortcut added: (only enigma2)
[M] (Same as [Similar] button)
-] With [command now displays information about the selected item.
- GUI and updated tooltips
FTP-Tool:
- Keyboard shortcuts added:
[Z] - The selected movie or audio file is played from the box.
[V] - streams selected movie or audio file to "VLC"
[Q] - Finished "VLC"
[C] - Copies the path of the selected file or folder to the clipboard.
(This makes it easier to create symlinks)
Menu: Help
- Menu item "Help ..." activated.
Shows the tooltip of the selected list in a separate window.
Stream Tool:
- Simplified some type of operation.
Enigma1:
Button: [to VLC] streams the current channel on the box to "VLC"
(Runs a "streaming to disc" then this button causes a playing of the stream file)
Keyboard: has [V] the same function as the [to VLC] knob.
Button: [to disc] starts a "streaming to disc" of the current channel on the box. (Recording the program on the Mac hard drive)
(Already runs a "streaming to disc", then the streaming (the recording) completed)
Keyboard: [D] has the same function as the [to Disk] button.
enigma2:
Button: [to VLC] streams the current channel on the box to "VLC"
(Already runs a "streaming to disc" then this button causes the playing of the stream file)
Keyboard: [V] streams the selected channel in the list to "VLC"
(running with the station a "streaming to disc", "VLC player" from the stream file)
Button: [to disc] starts a "streaming to disc" of the current channel on the box. (Recording the program on the Mac hard drive)
(Runs a "streaming to disc", then the streaming (the recording) completed)
Keyboard: [D] start a "streaming to disc" in the list of the selected channel.
(Already runs a "streaming to disc", then the streaming (the recording) completed)
-It can therefore be used up to three channels:
One runs on the television, one is with "VLC" and a third stored on the Mac's hard drive.
(It may even still be recorded by other stations of the box)
- NOTE:
What channels can be used simultaneously, however, is limited.
A click on the button: [playable] shows the usable channels in the list.
Bug Fixes:
- Incompatibility with OSX 10.4 (Tiger) fixed.
- After deleting a movie in the Movie tool now's the movie list is displayed.
- Fixed some minor bugs.
Note:
- There have been several changes have in the program keyboard shortcuts and context menus.
This is documented in the tooltip. (Visible or calling the respective context men
-
DreamBoxEdit-IHAD Edition 4.0.0.0
17.10.2010
Changelog:
4.0.0.0
- code migration to Delphi 2007, for later unicode support
- removed XP visual styles (there were some problems after migration to Delphi 2007)
- added theming for some components
- added channel numbers in bouquet panel
- added new hints in main list and bouquet details, now with picon and service reference
- added option to assign and remove picons
- added cleanup function for local picon directory (which removes all unused picons) to tools menu
- added option for automatic picon upload to FTP window (Note: unzip command on your dreambox is required)
- added configurable per profile picon path to options panel
- added quick profile selection in statusbar
- added enhanced filter expressions (SQL style):
use % as substitute for zero or more characters (e.g. %sky% shows all channels with "sky" in name),
use _ as substitute for exactly one character (e.g. _sky_ in package filter shows channels of provider "BSkyB")
use \ as escape character (e.g. %\%% shows all channels with "%" in name)
if you don't use above filter characters the filters will only show exact matches
- changed TV service types defaults (now including HDTV service types)
- fixed error message when saving alternatives bouquet with parental lock
- fixed error message after reading radio service alternatives
- fixed bouquet change is now disabled while picons are loading to prevent errors
- fixed alternative service names are now written in UTF-8 instead of ANSI
- fixed alternatives are now deleted if service is removed from main service list
- fixed alternatives are now handled for each user bouquet seperately
- fixed translation problem in alternatives panel
- fixed problem with incorrect filename if you tried to add alternatives for a data service, adding alternatives
for data channels is not allowed, please set proper service types in advanced options first
- fixed keep filters when adding alternatives for a service
- fixed missing picons when using cut&paste or drag&drop
- fixed display of proper bouquet name when bouquet has been renamed
- fixed display of picons when adding services to an empty bouquet
- removed "input selection" in main service list as it didn't work as expected
-
DreamBoxEdit-IHAD Edition 4.0.0.0
17.10.2010
Changelog:
4.0.0.0
- code migration to Delphi 2007, for later unicode support
- removed XP visual styles (there were some problems after migration to Delphi 2007)
- added theming for some components
- added channel numbers in bouquet panel
- added new hints in main list and bouquet details, now with picon and service reference
- added option to assign and remove picons
- added cleanup function for local picon directory (which removes all unused picons) to tools menu
- added option for automatic picon upload to FTP window (Note: unzip command on your dreambox is required)
- added configurable per profile picon path to options panel
- added quick profile selection in statusbar
- added enhanced filter expressions (SQL style):
use % as substitute for zero or more characters (e.g. %sky% shows all channels with "sky" in name),
use _ as substitute for exactly one character (e.g. _sky_ in package filter shows channels of provider "BSkyB")
use \ as escape character (e.g. %\%% shows all channels with "%" in name)
if you don't use above filter characters the filters will only show exact matches
- changed TV service types defaults (now including HDTV service types)
- fixed error message when saving alternatives bouquet with parental lock
- fixed error message after reading radio service alternatives
- fixed bouquet change is now disabled while picons are loading to prevent errors
- fixed alternative service names are now written in UTF-8 instead of ANSI
- fixed alternatives are now deleted if service is removed from main service list
- fixed alternatives are now handled for each user bouquet seperately
- fixed translation problem in alternatives panel
- fixed problem with incorrect filename if you tried to add alternatives for a data service, adding alternatives
for data channels is not allowed, please set proper service types in advanced options first
- fixed keep filters when adding alternatives for a service
- fixed missing picons when using cut&paste or drag&drop
- fixed display of proper bouquet name when bouquet has been renamed
- fixed display of picons when adding services to an empty bouquet
- removed "input selection" in main service list as it didn't work as expected
-
DreamBoxEdit-IHAD Edition 4.0.0.0
17.10.2010
Changelog:
4.0.0.0
- code migration to Delphi 2007, for later unicode support
- removed XP visual styles (there were some problems after migration to Delphi 2007)
- added theming for some components
- added channel numbers in bouquet panel
- added new hints in main list and bouquet details, now with picon and service reference
- added option to assign and remove picons
- added cleanup function for local picon directory (which removes all unused picons) to tools menu
- added option for automatic picon upload to FTP window (Note: unzip command on your dreambox is required)
- added configurable per profile picon path to options panel
- added quick profile selection in statusbar
- added enhanced filter expressions (SQL style):
use % as substitute for zero or more characters (e.g. %sky% shows all channels with "sky" in name),
use _ as substitute for exactly one character (e.g. _sky_ in package filter shows channels of provider "BSkyB")
use \ as escape character (e.g. %\%% shows all channels with "%" in name)
if you don't use above filter characters the filters will only show exact matches
- changed TV service types defaults (now including HDTV service types)
- fixed error message when saving alternatives bouquet with parental lock
- fixed error message after reading radio service alternatives
- fixed bouquet change is now disabled while picons are loading to prevent errors
- fixed alternative service names are now written in UTF-8 instead of ANSI
- fixed alternatives are now deleted if service is removed from main service list
- fixed alternatives are now handled for each user bouquet seperately
- fixed translation problem in alternatives panel
- fixed problem with incorrect filename if you tried to add alternatives for a data service, adding alternatives
for data channels is not allowed, please set proper service types in advanced options first
- fixed keep filters when adding alternatives for a service
- fixed missing picons when using cut&paste or drag&drop
- fixed display of proper bouquet name when bouquet has been renamed
- fixed display of picons when adding services to an empty bouquet
- removed "input selection" in main service list as it didn't work as expected
-
DreamBoxEdit-IHAD Edition 4.0.1.0
Changelog:
4.0.1.0
- fixed sorting services in bouquet panel was broken after adding channel numbers to the bouquet panel
- fixed error when sorting bouquets with cable and terrestrial services
- fixed some other functions were also broken after adding channel numbers to the bouquet panel
- fixed hour glass didn't get away after loading new settings
- fixed error message when using picon cleanup function and filename wasn't using proper picon reference format
- fixed alternatives are no longer considered as duplicates of fixed services in the same user bouquet
- fixed alternatives handling, now you can use the same service with and without alternatives in one user bouquet
- fixed blacklist entry for radio user bouquets
- fixed all files are now written in proper settings-type 4 format
- fixed auto insert markers for cable and terrestrial services
- added Enigma2 restart button to ftp window, use this button to activate any changes related to lamedb and/or black-/whitelist
use the autoreload or "reload settings on dreambox" button if you only change your userbouquets
- added sorting of profiles in options panel
- changed satellites in filter combobox are now sorted by position from west to east
- changed profile default paths to enigma2 defaults
- window state is now saved on application close, and restored when application is started
- some minor fixes
- language files updated
-
DreamBoxEdit-IHAD Edition 4.0.1.1
Quote:
Changelog:
4.0.1.1
- fixed alternatives filename generation
- fixed error message after opening Enigma1 settings
- fixed total service counter was overlapped by displayed service counter after startup without settings
- language files updated
-
DreamBoxEdit-IHAD Edition 4.0.1.2
4.0.1.2- fixed userbouquets with renamed services are now written in proper settings-type 4 format- fixed problem when saving cable or terrestrial settings (some parameters were lost)- language files updated
-
Update Features:
New in 4.0.3.5:
Update Features:
-Added DBEdit Package Upload Center For Public [Instant Prepair Package]
-Added DBEdit Package Download [Instant Dowload with Package ID]
-Added DBEdit Forum Code Generator
-Package Download: Vbulletin/myBB code [digital download link / Download Code Script]
-Added Auto Rebuild Package in "SAVE" mode in case if some errors appear from original standard file
-Software Interface Rebuilded
Special Thanks to : B@G , El Capitano & to my sweet heart Rose-Tn For Support !
DOWNLOAD - DreamBoxEdit-YASSINOV-EDition-V4.0.3.5.rar (http://shrta.com/files/PAZDG0FW/DreamBoxEdit-YASSINOV-EDition-V4.0.3.5.rar)
-
DreamBoxEdit v4.1.0.1
07-08-11
Changelog 4.1.0.1
- fixed problem with profile selection in options panel
- fixed missing parameters for cable settings after Enigma1->Enimga2 conversion
:download:
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=0U7I4DN0)
-
DreamBoxEdit - Mac Edition 4.0.1.1 v1.1
DreamBoxEdit Mac Edition
Porting By Bobsilvio
Changelog:
* Stable realase 1.1
- Installed all fonts
- Installed VB6
* Stable realase 1.0
- All new Wine
- New name
- Now the number is indicated (realase DreamBoxEdit)
- Update Wine engine 1.3.8
- Changelog new and old
* Beta realase 0.2
- Update Wine engine 1.3.7
* Beta realase 0.2
- Small fix startup
* Beta realase 0.1
- Wine engine 1.3.4
- Logo DreamBoxEdit
DreamBoxEdit - Mac Edition (http://uploaded.to/file/crujk737)
-
dreamboxEDIT 5.0.0.2
Changelog:
5.0.0.2
- fixed streaming for WebInterface 1.7.0 and higher
by dhwz
dreamboxEDIT_setup_5.0.0.2.zip
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/M3OC15XFEQ)
dreamboxEDIT_without_setup_5.0.0.2.zip
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/KCQ20XEEAI)
-
DreamboxEDIT 5.0.0.3
Changelog:
- changed QuickFTP buttons to avoid further confusions
- fixed hiding QuickFTP buttons if disabled in options
- some minor fixes
http://depositfiles.com/files/iyjrew2i1 (http://depositfiles.com/files/iyjrew2i1)
-
DreamboxEDIT 5.1.0.1
5.1.0.1 - fixed picon upload
dreamboxEDIT setup 5.1.0.1 (http://www.datafilehost.com/download-99d775f0.html)
-
Datum: 21.12.2012
Changes in 5.1.0.2
- fixed error message in empty bouquet area when opening the context menu
- some language file updates
Changes in 5.1.0.1
- fixed picon upload
Changes in 5.1.0.0
- added support for streaming services (non TS based IPTV/Radio services) in userbouquets
- added menu for adding/editing of streaming services
- added video streaming support for all box types
- added new filter options for only new and only locked services
- added option to re-enable the old style path selection dialog
- added configurable local picons path per profile, if no path is defined the global local picon path is used
- added deletion of temporary picon.zip after picon upload
- added new skins: Deep, iOS dark, MacOS2, Mint, NextAlpha, Subway, Toxic, Windows 8, WMP 2008, Zest
- added fix for the missing context menu in edit boxes
- added new hints (no more flickering)
- re-enabled the export of cable services/bouquets in Excel readable format
Note: re-import of cable services/bouquets is not possible, all cable services will be skipped on re-import
- fixed path selection dialog translation
- fixed timeout issue with enabled active service/volume control/signal strength display
- fixed error message while creating bouquet for one satellite
- fixed error when sorting cable and terrestrial services in the compare window
- some minor fixes
dreamboxEDIT_setup_5.1.0.2.zip (http://www.se$$$pace.com/file/d2qfki) (3.84MB)
-
dreamboxEDIT_setup_6.0.1.2
(http://speedy.sh/zd4Qq/dreamboxEDIT-setup-6.0.1.2.zip)http://speedy.sh/zd4Qq/dreamboxEDIT-setup-6.0.1.2.zip[/URL]
-
dreamboxEDIT_setup_6.0.1.3
(http://speedy.sh/vRwUQ/dreamboxEDIT-setup-6.0.1.3.zip)http://speedy.sh/vRwUQ/dreamboxEDIT-setup-6.0.1.3.zip[/URL]
(http://speedy.sh/NC9jB/dreamboxEDIT-without-setup-6.0.1.3.zip)http://speedy.sh/NC9jB/dreamboxEDIT-without-setup-6.0.1.3.zip[/URL]