some working files but depence the card
also some files may need 3-4 hrs au
thanks boomerang and mathikoloni for puting together the files
latest gam file gr to all cards cy to some one'shttp://rs362.rapidshare.com/files/330607818/paketaki_NiCCoLi_1.rarhttp://rs479.rapidshare.com/files/330609424/programms_ola_se_ena.zip
use emk loader or sataid one GR to all cards CY to some one's.
use emk loader or sataid one GR to all cards CY to some one's.GR 100% ok to all cards (updated on MGM)
CY working to some cards (updated on Alfa Tv Cy)
Programme with cas programmer or Gamma loader 1.1
After so many try, i end up having my Nova Gr & Cy with this file try it as well if you got luck and patient to get update it might work for you as well. Good luck peeps
[code]Use emk loader[/code]vre arxidi antox afto kleidonei kartes ti to ekanes upload?kai meglo kiolas
file work with 2 from 3 cards with os 1.4
just to let you now we still have c+nl working heres the files
bulsat and pinkplus use this loader by the way it will take 2to 3 hours to update on film 1 for c+nl
gamma card!!!!!
-You can test some old files from 2007.
Remember that you must leave the card in cardreader for 8 hours.
Then reboot - off on your receiver.
Maybe you are lucky......
ok DEAR TIRKIC tell me now how can i reanimate my card from the fake file of ANTOX, because the blame is on him, and my card give me always answer the card is locked ATR: tell me HOW.
tnnt_3
After the STRING copy log.txt from the file and
paste in the EMF field LOGGED DATA TO SEND TO CARD 1.reset card
2. Clean Card using Euro tools
3. Write with gam file in zip
4. Send string data from txt (only string, NOT as logged )
after 2-5 sec on cinema1 it should open.
loder_1.1
update_nova cinma1
time 2 muntes only More compatible to LG 1.4, will not miss if you try
them and the rest, with loader 1.1, which it closed.
GOOD LUCK
Se opion wjali FFFFFF sinehizi na wlepi ert sat...
se opion wjali HSN wlepi Nova... apla pramata...
hello m8
new file for gamma card it should work with all gamma cards
some cards only with Cy
you have to use TNNTLoader
put the card into your programmer and press reset
then send the tnn file
regards and good luck to all
-I hope to see some light, even cy....
Please reply if there is light or not and what OS you tried the card.
dd this game to those who have only CY fillet in any use,
for those packages and 2, not messing with anything.
HSN take you if you're lucky, otherwise,
unfortunately live alone with CY for the moment.
Load it with loader1.1
For many cards
If you get hsn FFFFFF then is not for your card
If you get hsn but all the others FFFFFF then search for fresh log and you will see the light
Nova GR
1 min on cinema 1
Enjoy
Working file.
have fun
Da die anderen CY Files anscheinend die xxxx55C Karten nicht hell machen, hier ein File dass meine 55C Karte für CY hellgemacht hat
Gives light to certain types of cards.
Upload the ekm and check all lines 3f bring you the right window.
May be more than one. If you look for fresh HSN C3 and CB Log.
Good luck .
Nova CY updated in a few minutes prog with cas 3
loaded with emk loader, mono CYwork fine
thanks brummie
http://rapidshare.com/files/378937367/NP_FILES.rar.htmlhttp://rapidshare.com/files/378940509/NP_FILES.rarhttp://hotfile.com/dl/39296007/173839d/NP_FILES.rar.htmlhttp://rapidshare.com/files/378942110/NP_FILES.rarhttp://rapidshare.com/files/378940634/NP_FILES.rar
loader emk in 3.line change FFF AND pro.00 chage
pro.00 change for same card work
-Key Update By Abu Ali Working With Os5.7
Gamma card cnl+ 19° est
use gamma loader 1.1