IncubusCamd 0 96 for Qbox HD
Oscam + Cccam 2.13 Autoinstalling Qbox one
Installate il file tar ... da pannello DCC .. poi andate nel DECO , tasto verde e installa plugin manuale.
Poi andare in var/bin e sostituite il file oscam con quello qui allegato.
Riavviate oscam+cccam da deco ( tasto blu)
Aspettate un po e luce fu ...
mi raccomando fate tutte le operazioni con card inserita e su canale la 7
Install the tar file ... Panel DCC .. then go to the DECO, green button and install plugins manually.
Then go in var / bin and replace the file with that OSCAM attached.
Restart OSCAM + CCcam from Deco (blue button)
Wait a bit and there was light ...
I recommend you do any transaction with the card inserted, and on channel 7
CCcam 2.1.3 For q-Box one Avalon
For q-Box one Avalon
CCcam 2.1.3
-important cardreader fixes
-DRE crypt support
-963 support
-reenabled n2 emu
Mgcamd 1.35
Neues Release des bekannten Emus mgcamd.
Viaccess_2.3-2.6 wird unterstützt.
Sie kann sich jetzt mit Cccam verbinden.
Die Caid 1830 wird erkannt (HD+)
Ansonsten ist noch kein Changelog erschienen.
New release of the famous mgcamd emu.
Viaccess_2.3-2.6 is supported.
You can now connect to cccam.
The Caid 1830 is detected (HD +)
Otherwise, no changelog yet been released.
Noua versiune EMU cu celebru mgcamd.
Viaccess_2.3-2.6 este suportat.
Vă puteţi conecta acum cu CCcam.
CaID 1830 este detectat (HD +)
În caz contrar, changelog nu a fost încă lansat.
Scam 3.58 For q-box 1 with Avalon
For q-box 1 with Avalon
MgCamd 1.35a
MgCamd 1.35a / For q-box 1 with Avalon
Mpcs for QBoxHD complete
27.01.10
Polsat card (nagra3) works 100% in the int reader with mpcs + newcs
- Lower: Polsat
- Upper: Cyfra +
Thanks to Przemo-g
For q-Box One with Avalon
qboxhd spox emu.
sBox QboxHD
14.03.10
Oscam for Qbox HD
RELEASE 1892.3-qboxhd
BAD
- Cannot use QboxHD internal cardreader: there is no information about them
- I've not tested it with multiple feed (watching a channel and recording another)
GOOD
- Works fine as simple client
- OScam webinterface is working (port 8888). Browse http://ip_your_qboxhd:8888/ (http://ip_your_qboxhd:8888/)
For security reason WebIf access is restricted from "private" IP (192.x.x.x, 10.x.x.x, 172.x.x.x)
See /var/oscam/conf/oscam.conf
- Integrated with SoftCam Panel 2.0.0
SOFTCAM PANEL 2.0.0 MUST BE ALREADY PRESENT if you want use it
WHERE IS ?
All oscam files are in QboxHD /var/oscam directory
- file oscam.sh4 : executable (run with start_oscam shell script)
- file start_oscam : shell script to run OScam (you can change debug level editing it and change "DEBUG" var)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples
HOW TO RUN ?
Edit /var/oscam/conf/oscam.server and set your remote server (CCC or Newcamd or else .....)
Then run it using Softcam Panel
Oscam for Qbox HD
31 March 2010
RELEASE 1919.0-qboxhd
BAD
- Cannot use QboxHD internal cardreader: there is no information about them
GOOD
- Works fine as simple client
- OScam webinterface is working (port 8888). Browse http://IP_YOUR_QBOXHD:8888/ (http://ip_your_qboxhd:8888/)
For security reason WebIf access is restricted from "private" IP (192.x.x.x, 10.x.x.x, 172.x.x.x)
See /var/oscam/conf/oscam.conf
- Integrated with SoftCam Panel 2.0.0
SOFTCAM PANEL 2.0.0 MUST BE ALREADY PRESENT if you want use it
- Looks to work whit multiple feed (watching a channel and recording another)
WHERE IS ?
All oscam files are in QboxHD /var/oscam directory
- file oscam.sh4 : executable (run with start_oscam shell script)
- file start_oscam : shell script to run OScam (you can change debug level editing it and change "DEBUG" var)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples
HOW TO RUN ?
Edit /var/oscam/conf/oscam.server and set your remote server (CCC or Newcamd or else .....)
Then run it using Softcam Panel
1943 HAPPY EASTER release
CHANGELOG:
solved a bug involving /tmp/pmt.tmp : now when OScam
start channel will be descrambled soon without zap
added cards examples in conf/oscam.server
added priority 1803 in oscam.conf [dvbapi] section (required for M7 card):
this is needed if provider has multiple CAID and you must set which is
correct CAID using priority
start_oscam now set DEBUG=0 (if not, you have HUGE logs...)
max log size is reduced to 1 MB (previous 2 MB), see oscam.conf
oscam.sh4 is now compiled WITHOUT Web Interface (this save resources).
If you need it change binary with oscam-webif.sh4 (mv oscam.sh4 oscam-
nowebif.sh4 ; mv oscam-webif.sh4 oscam.sh4) included in distribution
due to changing in conf files, this update ERASE all /var/oscam, so
please backup it first!
1943 HAPPY EASTER release
CHANGELOG:
solved a bug involving /tmp/pmt.tmp : now when OScam
start channel will be descrambled soon without zap
added cards examples in conf/oscam.server
added priority 1803 in oscam.conf [dvbapi] section (required for M7 card):
this is needed if provider has multiple CAID and you must set which is
correct CAID using priority
start_oscam now set DEBUG=0 (if not, you have HUGE logs...)
max log size is reduced to 1 MB (previous 2 MB), see oscam.conf
oscam.sh4 is now compiled WITHOUT Web Interface (this save resources).
If you need it change binary with oscam-webif.sh4 (mv oscam.sh4 oscam-
nowebif.sh4 ; mv oscam-webif.sh4 oscam.sh4) included in distribution
due to changing in conf files, this update ERASE all /var/oscam, so
please backup it first!
OSCam 2034.0 for QboxHD - 09 April 2010
CHANGELOG:
- added ecmcache option (see docs/oscam.server.txt)
- now if it's present a previous /var/oscam/conf directory, it will be moved in /var/oscam-conf.old before installer delete /var/oscam previous installation
OSCam 2034.0 for QboxHD - 09 April 2010
CHANGELOG:
- added ecmcache option (see docs/oscam.server.txt)
- now if it's present a previous /var/oscam/conf directory, it will be moved in /var/oscam-conf.old before installer delete /var/oscam previous installation
http://www.sendspace.com/file/ww3mw6 (http://www.sendspace.com/file/ww3mw6)
Oscam for Qbox HD
RELEASE 2155.0 QboxHD
Only binaries svn r2169
If you wish, you can overwrite original binaries 2155 in /var/oscam
Some adjustment in CAMD35 protocol and some bug fixes
OSCam 2193.0 QboxHD
**** CHANGELOG ****
> 2193.0 01/05/2010
- enabled QboxHD local card overclock (5.00 and 6.25 Mhz)
- many bug solved
- many cccam protocol improvement
- update conf/oscam.server file with overclock examples
RELEASE 2288.0 QboxHD
(...omissis...)
**** CHANGELOG ****
> 2288.0 16/05/2010
- many cccam protocol improvement
- Radar 4.6 looks to have a bug and OSCam cannot work properly. Please use Radar 4.5 firmware
here there is 2306 oscam version with support to pcsc omnikey tested and work from me the package contains driver and libs pcsc for qboxhd.
how-to install
-unpack the driver and transfer with ftp to qbox
-chmod 755 to files
-attached your omnikey or pcsc-reader to box and with oscam configured start daemon from telnet with following command
-/usr/local/sbin/pcscd
operating system: QboxHD
-- system type: sh4-qboxhd-linux
-- system: linux
-- cpu: sh4
-- hw: qboxhd
-- use system aes functions
-- use built-in sha functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb function
operating system: QboxHD
-- system type: sh4-qboxhd-linux
-- system: linux
-- cpu: sh4
-- hw: qboxhd
-- use system aes functions
-- use built-in sha functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb functions
-- web interface enabled
2324-------------------internal_reader+pcsc (driver+lib pcsc inside qbox)
2328-------------------internal_reader
2328---internal_reader
operating system: QboxHD
-- system type: sh4-qboxhd-linux
-- system: linux
-- cpu: sh4
-- hw: qboxhd
-- use system aes functions
-- use built-in sha functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb functions
-- web interface enabled
oscam-0.99.4svn2345 QboxHD
operating system: QboxHD
-- system type: sh4-qboxhd-linux
-- system: linux
-- cpu: sh4
-- hw: qboxhd
-- use system aes functions
-- use built-in sha functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb functions
-- web interface enabled
OSCAM RELEASE 2345.0 QboxHD
RELEASE 2345.0 QboxHD
********* BAD *********
- There is a bug in OSCam >2309 involving DVBAPI. OSCam MUST BE STARTED while watching an FTA channel. Wait solution from developers.
- OSCam QBoxHD CANNOT work with FD 01/03 and earlier : demux device ( /dev/dvb/adapter?/ ) miss "ca0" device and OSCam cannot work. OSCam QboxHD works fine with FD 19/03 and later
********* GOOD *********
- Works as simple client and server
- Enabled local card overclock for internal cardreader (only 5.00 Mhz and 6.25 Mh, see TIPS&TRICKS
- Compiled with support for PCSC USB card reader (thanks to linch)
********* WHERE IS ? *********
OSCam files are in QboxHD /var/oscam directory
- file oscam-nowebif.sh4 : executable (run it with start_oscam shell script) compiled without WebIf
- file oscam-webif.sh4 : executable compiled with WebIf
- file oscam-nowebif-pcsc.sh4 : executable compiled without WebIf and with PCSC
- file oscam-webif-pcsc.sh4 : executable compiled with WebIf and with PCSC
- file start_oscam : shell script to run OSCam (you can change debug level, WebIf and PCSC)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples
********* CHANGELOG *********
> 2345.0 30/05/2010 - There is a bug in OSCam >2309 involving DVBAPI. OSCam MUST BE STARTED while watching an FTA channel. Wait solution from developers. I suggest you to zap to a FTA channel, then zap again to another FTA channel and now start OSCam
- (thanks to linch) now OSCam QboxHD include PCSC USB card reader support. Tested with a simple USB reader "OMNIKEY 1021" and it works fine.
OSCam now is compiled with:
pcsclite 1.6.0 http://pcsclite.alioth.debian.org/ (http://pcsclite.alioth.debian.org/)
ccid 1.3.12 drivers http://pcsclite.alioth.debian.org/ccid.html (http://pcsclite.alioth.debian.org/ccid.html)
libusb-0.1.12 legacy (needed by PCSC)
libusb-1.0.8 for future SmartReader support (until now it doesn't work due to problem in Linux ST kernel: it's old. SmartReader require kernel >=2.6.30)
Edit start_oscam and choose if you want (or not) WEBIF and PCSC support. If you enable PCSC, starting OSCam require about 20 seconds (it needs to start PCSC daemon too)
If you are not interested in these features, please don't enabled them: you save resources !
- If you have errors untarring oscam-2345.0-qboxhd_update.tar.gz (symlinks are not permitted in a FAT device like USB pendrive) don't worry: during update symlinks are automatically created for you
RELEASE 2387 QboxHD
05 June 2010
********* BAD *********
- Many things ... :-((
- OSCam QBoxHD CANNOT work with FD 01/03 and earlier : demux device ( /dev/dvb/adapter?/ ) miss "ca0" device and OSCam cannot work
OSCam QboxHD works fine with FD 19/03 and later
- Some RaDaR versions have problems with OSCam. Please install (from NAPO Addons server) "SoftCam Panel 3.6.0 OSCAM". Other SoftCam Panel version stop working OSCam with DTT tuner
(...omissis...)
********* CHANGELOG *********
> 2387 05/06/2010
- solved bug about DVBAPI
- qboxhd_update: added support to show correct image in LCD display (qboxhd vs. qbox_mini)
- Some RaDaR versions have problems with OSCam. Please install (from NAPO Addons server) "SoftCam Panel 3.6.0 OSCAM". Other SoftCam Panel version stop working OSCam with DTT tuner
version 2566
compiled with stlinux-2.3 with and without support omnikey-usb
Timestamp: 06/25/2010 Author:schlocke Message: webif: fixed compiler warnings
http://www.multiupload.com/F35HTSUH1S oscam-0.99.4svn2566_qboxhd_st_2.3_internal.zip
http://www.multiupload.com/2N7KP90HKX (http://www.multiupload.com/2N7KP90HKX) oscam-0.99.4svn2566_qboxhd_st_2.3_pcsc.zip