Print Page - cccam / oscam

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 01:11:58 AM

treba mi tutorial kako ide oscam /cccam na linuxu,gdje koji fajl i postavke za total tv,vidio sam negdje na forumu kako se podešava ali nemogu sad nać,i kako ga pokrenut prvi put

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 09:52:51 AM

evo sam ti prebacio post gdje treba i tu ces naci postavke za total, eh gdje sta ide to sve zavisi od tebe gdje sta planiras da bude ali ono po defaultu oscam ide u usr/local/bin , oscam config failovi idu u usr/local/etc , u root napravis jos jedan direktorij emu i u njega script i u script ubacis oscam scriptu ,nakon toga jos u rc.local upises ovu liniju /bin/oscam &
da bi to sve bilo OK ides u putty i kucas ovu naredbu
ln /emu/script/oscam /bin/oscam
sa njom si automatski redirektovao scriptu direkt u bin i onda u putty kucas
oscam start
oscam stop
oscam restart
znaci jednostavnije i lakse da se ne kuca ona velika naredba , itd itd
ako zapne pisi

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 10:00:07 AM

hvala na odgovoru,treba mi scripta za pokretanje ovo ostalo ću se probat snać

i koja verzija oscama mi je najbola da radi s cccam 2.1.3

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 10:10:53 AM

4863 za Total ona je trenutno i kod mene , mada ja testiram svaki oscam koji izadje i onda ostavim koji je OK, evo scripta

download script (http://www.multiupload.com/474UDLP15Q)

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 10:18:32 AM

skinuo sam ovaj oscam što si maloprije postavio na forum,piše ovaj što ide na linux ,ali 64 bitni u mene je 32 bitni onda koji da stavim

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 10:27:23 AM

sta imas Debian ili Ubuntu i koji

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 11:44:12 AM

ubuntu 8.04

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 12:14:42 PM

evo ti za 8.04

download oscam (http://www.multiupload.com/I18TYIEMYR)

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 12:26:26 PM

kad u putty ukucam oscam start izbaci mi ovu grešku

Warning: keyword 'httpsavefullcfg' in webif section not recognized

a sad i ovo PANIC: master deadlock! last location: init

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 02:13:08 PM

nisi dobro podesio

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 03:07:33 PM

neznam gdje sam mogao pogriješit,trebaju mi da rade dva emulatora,oscam samo da čita karticu a cccam da mi je server

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 03:34:57 PM

sad mi ovo izbacuje u terminalu

2011/04/01 15:35:20 5889 s >> OSCam << cardserver started version 1.00, build #3784 (i686-pc-linux)
2011/04/01 15:35:20 5889 s version=1.00, build #3784, system=i686-pc-linux, nice=-1
2011/04/01 15:35:20 5889 s max. clients=509, client max. idle=120 sec
2011/04/01 15:35:20 5889 s max. logsize=unlimited
2011/04/01 15:35:20 5889 s client timeout=5000 ms, fallback timeout=2500 ms, cache d elay=10 ms
2011/04/01 15:35:20 5889 s shared memory initialized (size=4340106, id=425988)
2011/04/01 15:35:20 5889 s auth size=4772
2011/04/01 15:35:20 5889 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 )
2011/04/01 15:35:20 5889 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 e xpired, 0 disabled
2011/04/01 15:35:20 5889 s signal handling initialized (type=sysv)
2011/04/01 15:35:20 5889 s can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2011/04/01 15:35:20 5889 s can't open file "/usr/local/etc/oscam.tiers" (err=2), no tier-id's loaded
2011/04/01 15:35:20 5889 s can't open file "/usr/local/etc/oscam.provid" (err=2), no provids's loaded
2011/04/01 15:35:20 5889 s monitor: disabled
2011/04/01 15:35:20 5889 s camd 3.3x: disabled
2011/04/01 15:35:20 5889 s camd 3.5x: disabled
2011/04/01 15:35:20 5889 s cs378x: disabled
2011/04/01 15:35:20 5889 s newcamd: disabled
2011/04/01 15:35:20 5889 s cccam: disabled
2011/04/01 15:35:20 5889 s radegast: disabled
2011/04/01 15:35:20 5889 s logger started (pid=5891)
2011/04/01 15:35:20 5889 s http disabled
2011/04/01 15:35:20 5889 s reader started (pid=5892, device=001:002, detect=cd, mhz= 400, cardmhz=369)
2011/04/01 15:35:20 5889 s waiting for local card init
2011/04/01 15:35:20 5892 r01 ERROR, you have specified 'protocol = smartreader' in osc am.server,
2011/04/01 15:35:20 5892 r01 recompile with SmartReader support.
2011/04/01 15:35:20 5892 r01 Cannot open device: 001:002
2011/04/01 15:35:20 5846 r01 ERROR, you have specified 'protocol = smartreader' in osc am.server,
2011/04/01 15:35:20 5846 r01 recompile with SmartReader support.
2011/04/01 15:35:20 5846 r01 Cannot open device: 001:002
root@cccam:~# 2011/04/01 15:35:23 5889 s init for all local cards done
2011/04/01 15:35:23 5889 s anti cascading disabled
2011/04/01 15:35:23 5889 s dvbapi: dvbapi disabled
root@cccam:~# 2011/04/01 15:35:49 5882 r01 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/01 15:35:49 5882 r01 recompile with SmartReader support.
2011/04/01 15:35:49 5882 r01 Cannot open device: 002:003
2011/04/01 15:36:20 5892 r01 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/01 15:36:20 5892 r01 recompile with SmartReader support.
2011/04/01 15:36:20 5892 r01 Cannot open device: 001:002
2011/04/01 15:36:20 5846 r01 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/01 15:36:20 5846 r01 recompile with SmartReader support.
2011/04/01 15:36:20 5846 r01 Cannot open device: 001:002

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 03:37:28 PM

evo gdje sve pise u citacu

2011/04/01 15:35:20 5892 r01 ERROR, you have specified 'protocol = smartreader' in osc am.server,
2011/04/01 15:35:20 5892 r01 recompile with SmartReader support.
2011/04/01 15:35:20 5892 r01 Cannot open device: 001:002
2011/04/01 15:35:20 5846 r01 ERROR, you have specified 'protocol = smartreader' in osc am.server,
2011/04/01 15:35:20 5846 r01 recompile with SmartReader support.
2011/04/01 15:35:20 5846 r01 Cannot open device: 001:002
root@cccam:~# 2011/04/01 15:35:23 5889 s init for all local cards done
2011/04/01 15:35:23 5889 s anti cascading disabled
2011/04/01 15:35:23 5889 s dvbapi: dvbapi disabled
root@cccam:~# 2011/04/01 15:35:49 5882 r01 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/01 15:35:49 5882 r01 recompile with SmartReader support.
2011/04/01 15:35:49 5882 r01 Cannot open device: 002:003
2011/04/01 15:36:20 5892 r01 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/01 15:36:20 5892 r01 recompile with SmartReader support.
2011/04/01 15:36:20 5892 r01 Cannot open device: 001:002
2011/04/01 15:36:20 5846 r01 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/01 15:36:20 5846 r01 recompile with SmartReader support.
2011/04/01 15:36:20 5846 r01 Cannot open device: 001:002

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 03:58:25 PM

pozno mi je sad smargo
šta mu znači sad ovo WARNING: pipe header to small

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 04:39:13 PM

resetuj oscam ponovo i onda vidi sta pise

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 04:43:30 PM

isto i opet neće da pozna smargo,kad sam pokušo so ovim http://www.cardsharing-x.com/oscam-tutorial-ex-yu/17975-oscam-smargo-na-pc-serveru.html pozno ga je sad opet neće

Title: cccam / oscam
Post by: Oscam on April 01, 2011, 04:52:54 PM

hajde veceras cu ti ja to pogledati cijeli dan sam na Oscamu nesto pokusavam pa ne mogu ovako napamet da ti pisem dok ne vidim direkt u putty sta se desava

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 04:58:24 PM

ok, može

Title: cccam / oscam
Post by: patriot07 on April 01, 2011, 08:35:50 PM

pokrenuo sam oscam vidim u cccaminfo da je konektiran i da oscam očita karticu ali nemogu da se logiram na oscam web info jer nisam dobro podesio

Title: cccam / oscam
Post by: patriot07 on April 02, 2011, 11:18:59 PM

pokrenuo sam oscam server i konektujem se preko web info ali mislim da mi nepozna ova verzija oscam-a smargo čitač

Title: cccam / oscam
Post by: Oscam on April 02, 2011, 11:42:03 PM

ja ti sinoc u shoutu napisao msn i pisem hajde javi se ti nista

Title: cccam / oscam
Post by: patriot07 on April 02, 2011, 11:46:08 PM

oprosti nisam vidio

ima li druga neka verzija što podržava smargo čitač

Title: cccam / oscam
Post by: patriot07 on April 05, 2011, 03:41:13 PM

zašto me kad se konektiram kao klijent na oscam server za 2 do 3 sec odkonektuje

4 s http started (pid=5397)
2011/04/05 15:42:17 5397 h HTTP Server listening on port 8888
2011/04/05 15:42:17 5394 s reader started (pid=5398, device=001:002, detect=cd, mhz=357, cardmhz=357)
2011/04/05 15:42:17 5398 r02 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/05 15:42:17 5398 r02 recompile with SmartReader support.
2011/04/05 15:42:17 5398 r02 Cannot open device: 001:002
2011/04/05 15:42:17 5394 s waiting for local card init
2011/04/05 15:42:20 5394 s init for all local cards done
2011/04/05 15:42:20 5394 s anti cascading disabled
2011/04/05 15:42:20 5394 s dvbapi: dvbapi disabled
2011/04/05 15:42:20 5394 s client(1) connect from 127.0.0.1 (pid=5399, pipfd=12)
2011/04/05 15:42:22 5399 c01 Connection closed to client
2011/04/05 15:42:32 5394 s client(1) connect from 127.0.0.1 (pid=5400, pipfd=12)
2011/04/05 15:42:34 5400 c01 Connection closed to client
2011/04/05 15:42:46 5394 s client(1) connect from 127.0.0.1 (pid=5401, pipfd=12)
2011/04/05 15:42:48 5401 c01 Connection closed to client
2011/04/05 15:42:59 5394 s client(1) connect from 127.0.0.1 (pid=5402, pipfd=12)
2011/04/05 15:43:01 5402 c01 Connection closed to client
2011/04/05 15:43:12 5394 s client(1) connect from 127.0.0.1 (pid=5403, pipfd=12)
2011/04/05 15:43:14 5403 c01 Connection closed to client
2011/04/05 15:43:17 5398 r02 ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/05 15:43:17 5398 r02 recompile

Title: cccam / oscam
Post by: patriot07 on April 17, 2011, 07:27:38 PM

uspio sam naÄ‡ odgovarajuÄ‡u verziju da radi,problem mi je sljedeÄ‡i ecm mi je oko 203 neide manje i kad ubacim (services = services1) u oscam.user diskonektira mi n liniju u cccam-u

Title: cccam / oscam
Post by: Oscam on April 17, 2011, 07:35:12 PM

sa smargo neces ni dobiti manji ecm dok sa phoenix ide od 0.120-0.140, malo je cudno sto ti diskonektuje N da nemas 2 ista usera ubacena

Title: cccam / oscam
Post by: patriot07 on April 17, 2011, 07:37:25 PM

sami 1 user, poslje pobriÅ¡em services = services1 ni tad onda neÄ‡e da bude online linija

evo sad nakon 10 min.. sam pokrenuo oscam i sve je u redu

Title: cccam / oscam
Post by: patriot07 on April 17, 2011, 07:42:11 PM

i stalno mi mjenja mjesto na Device = 001:011, dali moram izbrisat iz cccam-a /dev/USB0 da bi rijeÅ¡io ovaj problem

Title: cccam / oscam
Post by: Oscam on April 17, 2011, 07:46:43 PM

mijenja Device jedino ako vadis USB a ako ne trebalo bi uvijek da stoji onaj koji si zadao , u cccam cfg ti vise to i ne treba uopste jer oscam odradjuje posao

Title: cccam / oscam
Post by: patriot07 on April 17, 2011, 07:51:56 PM

ok,joÅ¡ neÅ¡to kako sad stvari stoje ako nemogu dobit manji ecm koja je onda razlika izmeÄ'u oscama i cccam-a trenutno

Title: cccam / oscam
Post by: Oscam on April 17, 2011, 08:08:58 PM

oscam ti sabira cash i ako ima puno zahtjeva a nemoze karta da odazove onda to odradjuje cash

Title: cccam / oscam
Post by: patriot07 on April 17, 2011, 08:12:16 PM

kako da rijeÅ¡im problem sa service ,poÅ¡to mi nije full paket pa mi vako stoji

(091F&000000/1195/77:11A9): found (208 ms) by totaltv
(091F&000000/0007/5F:EC6A): not found (171 ms)
(091F&000000/058D/77:BBB7): not found (193 ms)
(091F&000000/0002/77:DCB7): found (214 ms) by totaltv
(091F&000000/0457/77:71D4): found (208 ms) by totaltv
(091F&000000/07D6/77:4147): found (213 ms) by totaltv
(091F&000000/07DA/77:AD5B): found (207 ms) by totaltv
(091F&000000/0521/77:0917): found (214 ms) by totaltv
(091F&000000/1195/77:0508): found (218 ms) by totaltv
(091F&000000/03F5/77:8540): not found (192 ms)
(091F&000000/0007/5F:DD2C): not found (170 ms)
(091F&000000/058D/77:88AA): not found (188 ms)

Title: cccam / oscam
Post by: antik3r on April 17, 2011, 09:00:49 PM

Blokiras CAID koji ti nerade na kartici tako ces izbjeci BdECM

Title: cccam / oscam
Post by: patriot07 on April 22, 2011, 10:45:36 PM

pojavio mi se novi problem,kad mi se server restarta u jutro kartica mi neÄ‡e da radi,proradi mi tek kad smargo iÅ¡Äupam iz usb-ea i kad restartam server .
zna li neko u Äemu je problem?

Title: cccam / oscam
Post by: patriot07 on April 25, 2011, 05:38:26 PM

izgleda da je i moja stala
cccam je ne pozna nikako,a oscam je ali neznam dali se promjenio boxkey,u oscam web infu mi sa desne strane piÅ¡e error za karticu

isto tako zna pisat i needinit

nije stala veÄ‡ je crko smargo ÄitaÄ

Title: cccam / oscam
Post by: joselitooblea55 on April 27, 2011, 08:23:58 PM

Where is the cccam.cfg file located?

Title: cccam / oscam
Post by: mojrs on November 05, 2012, 01:29:08 PM

Kako da instaliram Oscam na Debian i podesim da radi kako treba?

Cardsharing-x Forum

» CardSharing Section => General Sharing Discussion => » CS Help and Tutorials « => OScam Pomoc => Topic started by: patriot07 on April 01, 2011, 01:11:58 AM