Print Page - Coolstream HD-1 EMU Firmware

Title: Coolstream HD-1 EMU Firmware
Post by: antox on December 24, 2009, 10:24:04 AM

Coolstream HD-1 EMU Firmware
Image from 07.12.2009 with S02 and CccamServer support

QuoteHave here views an image for people who only want to look found. 8)

This image is based on the original image of 06.10.09 (for the maps is simply the best story)

It supports cards in card reader (6MHZ) such as an S02 and a few more: thumbup: (D02 / S01 / Arena .......)

In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.

A few scripts implicating have come to the beautiful and small pictures .....

I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein. : thumbup:

So much fun with it and as I said just found ..... 8)

The level is the way:

Citation
Filesystem 1k-blocks Used Available Use% Mounted on
mtd2 28160 22296 5864 72% /

Code Select

http://hotfile.com/dl/16864227/516d677/07112009.rar.html

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on December 24, 2009, 10:25:16 AM

Image from 18.12.2009 extended created with newcs Mgcamd OSCAM on 24/12/2009

Code Select

Will support the HD + cards via the internal card reader newcs.
Your S02 will be very well read in the external Smargo via newcs.
A patched OSCAM is also included but not configured. (still too much bugi) that supports the second Smargo (external USB card reader)
As always, you can feed the cccamd.list with their own data and can then access a CccamServer. () Up to version 2.1.1 without problems

Code Select

http://rapidshare.com/files/325066359/backups24122009.rar

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on December 30, 2009, 04:45:52 PM

Image from 18.12.2009 extended created with newcs Mgcamd OSCAM on 30/12/2009
So what you have for the boredom ..... including all of the update, it's here and there

THX TheDuke

(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fs585.photobucket.com%2Falbums%2Fss294%2Fup_ro_dri%2Fth_Rapid.png&hash=e37108acc130e56c354b7487368dbbdb9ca11173)

Code Select

http://rapidshare.com/files/327988482/backups30.12.09.rar

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on January 01, 2010, 06:20:56 PM

Coolstream Image 30.12.09

Coolstream Image 30.12.09

Warning:

This release will upgrade your Kernel(16 DEC) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------

- Fix Video driver for disturbed picture after rewind
on SD channels (using PVR)

- Try to make DVB Subtitles More Reliable

Code Select

http://www.speedyshare.com/files/20081845/mtd_2_30.12.2009.rar

Title: Coolstream HD-1 Images
Post by: antox on January 02, 2010, 11:34:09 AM

Image from 30.12.2009 extended created with newcs Mgcamd OSCAM on 01.01.2010

Image from 30.12.2009 extended created with newcs Mgcamd OSCAM on 01.01.2010

Have here views an image for people who only want to look found.

Will support the HD + cards via the internal card reader newcs.
Your S02 will be very well read in the external Smargo via newcs. (Which will be newcs.xml be adapted for this purpose)
A patched OSCAM is also included but not configured. This supports the Smargo (external USB card reader)
The OSCAM is off and is turned into the one in / var / etc / .oscam.aus renames. OSCAM
As always, you can feed the cccamd.list with their own data and can then access a CccamServer. () Up to version 2.1.1 without problems
The Emu's are on the stand today or yesterday.

Code Select

http://www.speedyshare.com/files/20093643/Image_vom_30.12.2009_erweitert_mit_Newcs_Mgcamd_Oscam_erstellt_am.rar

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on January 04, 2010, 08:22:28 PM

VergrÃ¶sserte Miniaturansicht anzeigen
Image vom 30.12.2009 erweitert mit Newcs Mgcamd Oscam erstel
Habe hier mal ein Image fÃ¼r die Leute die nur schauen wollen gefunden. UnterstÃ¼tzt wird die HD+ Karten im internen Kartenleser via Newcs . Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfÃ¼r angepasst werden) Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstÃ¼tzt den Smargo (externe USB Kartenleser) Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam Wie immer kann man die cccamd.list mit eigenen Daten fÃ¼ttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme) Die EmuÂ´s sind auf dem Stand von heute oder gestern.

Code Select

http://www.mediafire.com/file/ijxiyzciynm/Image_vom_30.12.2009_erweitert_mit_Newcs_Mgcamd_Oscam_erstellt_am_01.01.2010.rar

Title: Re: Coolstream HD-1 Images
Post by: antox on January 18, 2010, 01:43:02 PM

2010-01-15-Customfirmware-BOFH
Absolut Alpha! flashed und bootet ansonsten vÃ¶llig ungetestet!

Basis war das Seife Buildsystem stand von 14.01.2010 21:00 Uhr

flashen auf eigene Gefahr!

btw
erste

Code Select

http://www.2shared.com/file/10750153/ad09f2eb/2010-01-15-bofh-mtd2.html

Title: Re: Coolstream HD-1 Images
Post by: elcardinal74 on January 18, 2010, 10:07:53 PM

Emu Image

Image vom 30.12.2009 erweitert mit Newcs Mgcamd Oscam erstellt am 17.01.2010

UnterstÃ¼tzt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfÃ¼r angepasst werden)
Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstÃ¼tzt den Smargo (externe USB Kartenleser)
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten fÃ¼ttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die EmuÂ´s sind auf dem Stand von heute oder gestern.

(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fi35.tinypic.com%2Fi2q8g3.jpg&hash=240faec709a7f9f412f353765a86e1ac887e0b19)

Title: Re: Coolstream HD-1 Images
Post by: antox on January 24, 2010, 10:01:27 AM

Customfirmware-BOFH
Customfirmware-BOFH v1.5

Code Select

inter alia with new compiler options (Neutrino only 1.4 MB) is
Busybox 1.1.6 (snapshot)
Hotplug
Onlienupdate gifixt
CA-Icons
flash_eraseall enabled
awk enabled
strace
rsync
CIFS samba 3.x incl
cables.xml including Unity Media

Code Select

http://hotfile.com/dl/25535852/a35033b/2010-01-23-BOFH-v1.5.rar.html

Title: Re: Coolstream HD-1 Images
Post by: antox on January 25, 2010, 09:07:19 AM

Customfirmware-BOFH v1.6

Code Select

Updated

OSD fix aus dem svn
vsftpd

Thx BOFH

Code Select

http://hotfile.com/dl/25662488/3cbb978/2010-01-24-BOFH-v1.6.rar.html

Title: Re: Coolstream HD-1 Images
Post by: aamir11 on February 07, 2010, 05:25:54 PM

TD image from 07.02.2010

So die Alphaversionen haben ein Ende gefunden ab jetzt Beta Versionen

Leider funktioniert die Oscam im Moment erst nach einen Emureset aber das wird auch noch

Mgcamd und Oscam sind voreingestellt fÃ¼r HD+ im internen Kartenleser und S02 im USB Leser (Smargo)

Newcs ist via /var/etc/ ---> .newcs.aus ausgeschaltet und kann durch entfernen des PunktAus eingeschaltet werden

Quotehttp://www.speedyshare.com/files/20804597/Mamrot_Coolstream_mtd2_20100207.zip

Title: Re: Coolstream HD-1 Images
Post by: antox on February 11, 2010, 09:03:40 AM

The a nox 0.1A

Test version. In my starts, but it's better to back the current firmware.

Basis: the original firmware 1.50 from 21.01.2010
Neutrino SVN rev 209 + my modifications

Changes to the original:
-orders in the file system
-lack of games
-lack of links
-hdd_power = 1
Polish-better location
-access to the server with add-ons
-hotplug-enabled labels
-you want to change / make labels for the ext3 file system
-option controlling fan behavior in the standby mode (on / off.)
remove the menu-installed add-ons
Menu Management-emulators
Mgcamd 1.35 +-plug to restart
-NewCS 1.20 RC13 + plug to restart
-beam information with information about the active emulator and conditional access system
-image of conditional access systems

Menu emulators have a turn in the Main Menu-> Settings-> Remote-> blue button. Just to add an item emulators. Will be available when you press the blue button 2x. Emulators installed on the server will not work, will soon throw new addons. Tuxbox Commander, although installed, is not working. Forgotten replace libfreetype. You can install the server and it should go. There is no need to install fanctrl, and even not to do so. I made nothing of a video, so do not play more formats than the original. I guess everything, I will add something to remember.

Gracias a nox47

(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.kingsat.info%2Fforum%2Fattachment.php%3Fattachmentid%3D44812%26d%3D1265874267&hash=029e7aabf779a4e3cb2647d3d3ebeb621cf11b54)

http://www.megaupload.com/?d=U3DMHB9Y (http://www.megaupload.com/?d=U3DMHB9Y)

Title: Re: Coolstream HD-1 Images
Post by: labud on February 25, 2010, 12:51:32 AM

Coolstream Image vom 24.02.2010

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.
----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel(Feb 7) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
- Add Automatic Audio / Subtitle selection in
International Settings
- Fix some more UTF-8 for VFD
- Some small fix for Video
- Fix video driver for mpeg4 SD resolution
channels
- Scale down dvb subtitle for better view
- Improve teletext subtitle
- Auto-start/remember teletext subtitle
- Analog sound on/off support
- Disable zap to different TP from channel
list if recording
- Restore analog audio stereo/mono mode on zap
- Fixes for webif radio streaming bouquets/channels lists
- fta channels scan option

downloand (http://depositfiles.com/files/lg9uz8qag)

Title: Re: Coolstream HD-1 Images
Post by: antox on February 28, 2010, 10:30:48 AM

Coolstream Image vom 25.02.2010

Fix PMT parsing Problem on GOLDMAX, see Bugtracker

- Add Automatic Audio / Subtitle selection in
International Settings
- Fix some more UTF-8 for VFD
- Some small fix for Video
- Fix video driver for mpeg4 SD resolution
channels
- Scale down dvb subtitle for better view
- Improve teletext subtitle
- Auto-start/remember teletext subtitle
- Analog sound on/off support
- Disable zap to different TP from channel
list if recording
- Restore analog audio stereo/mono mode on zap
- Fixes for webif radio streaming bouquets/channels lists
- fta channels scan option

Code Select

[url]http://www.coolstream.to/index.php?page=DownloadDBFileDownload&dataID=117[/url]

Title: Re: Coolstream HD-1 Images
Post by: antox on February 28, 2010, 10:34:48 AM

SB & Flash Image - Striper - 20.02.2010

- SVN Revision 394
- busybox 1.16.0
- dark-theme
- neutrino startet mit "-r 100 80" -> lesbare Schrift
- natives top/ps
- hotplug
- native e2fsprogs
- autofs
- openssl 0.9.8
- vsftpd 2.2.2
- natives flashcp
- optimierte GrÃ¶ÃŸe durch geÃ¤nderte Compilerflags

Plugins:

- Tuxbox Commander
- getrc
- input
- msgbox
- shellexec
- BuliTore 2.2
- Buli1Tab

Ihr mÃ¼sst ggf. die Netzwerksettings nach dem ersten Booten anpassen da ich eine feste IP drin habe (192.168.0.6).
Einfach den Inhalt des Tarballs entpacken und auf euren USB-Stick kopieren. Dann davon nach dieser Anleitung booten.
Wer unbedingt flashen will macht das auf eigenes Risiko!

Download USB version

http://rapidshare.com/files/353415018/201002201841.tar (http://rapidshare.com/files/353415018/201002201841.tar)

Download Flash version

http://rapidshare.com/files/353414994/201002201841.img (http://rapidshare.com/files/353414994/201002201841.img)

Title: Re: Coolstream HD-1 Images
Post by: macro on March 11, 2010, 12:44:31 AM

10.03.2010

neutrino_ufs910_flash_311-RC58

QuoteFÃœR FLASH UFS-910!!!! UPDATE RC57!!

RC57 FLASHEN UND AB UND AN MA SCHAUEN OBS WAS NEUES GIBT MIT:

MENU-SERVICE-SOTFWAREAKTUALISIERUNG-BLAU-IMGWAHL-JA-JA-JA-JA

UND ES HOLT SICH DAS NEUE IMAGE DIREKT NACH /TMP IN UFS, UND FLASHT ANSCHLIESSEND DIREKT!!
SWAPRAM SOLLTE DAFÃœR AN SEIN!

bitte via rechte maus save as auf den hyperlink unten downloaden.
mittels download button oben rechts gehts nicht, k.a warum!!!

ES GIBT KEINE USB/HDD-VARIANTE DAVON, WEDER JETZT NOCH ZUKÃœNFTIG!!
ALSO BITTE NICHT IMMER WIEDER NACH NER BA/USB/HDD VERSION FRAGEN!

rockt supi

webifstreaming-beta (thx _network!):
- webif Ã¶ffnen
- zappen Ã¼ber webif
- oben rechts auf vlc icon
- m3u- Ã¶ffnen mit vlc
- es geht nur SDTV
- wÃ¤hrenddessen geht recording nicht und es meldet : verz. nicht beschreibbar, nach reboot wieder ok!

duckbox-rev294:
changelog:
siehe menu-4-changelog
oder:
hier

sd/hd-tv ok
ton sync

movieplayer spielt:
avi
xvid
divx
ts
mkv
mp4

audioplayer spielt:
mp3

record geht auch

nfs mount via nfs geht!

operations is back!!! (gute alte db2 zeit!)

also alles wichtige findet man unter:
var/usr/local/share...
wie z.b.
configfolder
operations
settings

on boot german language, diseqc1.0 astra 1 hotbird 2, 1080ip50, bestfit
bootargs sind wie e2 brauch man also nix Ã¤ndern!

known bugs:
timeshift geht nicht
subtitle gehen glaube auch nich

wichtige hinweise:
wenn man egal wie die uhr im tv oben rechts hat:
geht wech mit
menu, auf tvmodus markieren und pfeil rechts!!!

nix illegales drin versteht sich ja wohl von selber!!!
TDT and all git-developer/members!!!!many thx to

Code Select

http://rapidshare.com/files/361697514/neutrino_ufs910_flash_311-RC58.rar

Title: Emu Image CoolStream 02/04/2010
Post by: antox on April 03, 2010, 06:47:00 AM

Emu Image CoolStream 02/04/2010
(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.sat-universe.com%2Fattachment.php%3Fattachmentid%3D204621%26d%3D1270204270&hash=977435cee9dc31e61148cbfe85f89985f8ad30c7)(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.sat-universe.com%2Fattachment.php%3Fattachmentid%3D204622%26d%3D1270204270&hash=bc472eb1648ee5d501f2fc81446eea20b2c3d92f)
Original image created with extended newcs MgCamd OSCAM on
02/04/2010 .. Happy Easter

Said Mal was fine for Easter ...

The image is based on the original image of 23/03/2010.
Advanced MgCamd 1.35A with newcs and OSCAM 1939 including web interface.
Some useful plugins come with it. Newcs or OSCAM you can now set via script / plugin by default.
Who can say thank you is good and who is not to say it quietly .... or not

Such a beautiful Easter and so much fun

Thanks TheDuke
Emu Image CoolStream 02/04/2010 (http://www.megaupload.com/?d=0GNJZOA7)

Title: Re: Coolstream HD-1 Images
Post by: antox on April 03, 2010, 09:49:50 AM

TD Image of 02/04/2010 (all just stolen grin)

What the test .... have for the boredom .... Easter is so long .... Image is an theduke and runs quite well ....

Current SVN 536 or so
Advanced MgCamd 1.35A with newcs and OSCAM 1972 including web interface.
Some useful plugins come with it. Newcs or OSCAM you can now set via script / plugin by default.

And no TD is theduke and not Triple Dragon
(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.sat-universe.com%2Fattachment.php%3Fattachmentid%3D204785%26d%3D1270271345&hash=95ad5a1ef8ca222cdbcedbdf55b69b4aeeec634b)(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.sat-universe.com%2Fattachment.php%3Fattachmentid%3D204786%26d%3D1270271345&hash=5775148d5f709aa0d7431bfbb2bb5b7411eedff7)
Gracias a TheDuke
TD Image of 02/04/2010 (http://www.multiupload.com/VPDBC22IUJ)

Title: Re: Coolstream HD-1 Images
Post by: antox on April 03, 2010, 09:50:43 AM

bazi98 image of 02/04/2010
I also once played a little bit and adjusted the originals.
Unfortunately, I can make from the scripts menu, no pictures as this empty for me, but the Flex looks a bit different.
Whoever finds the hidden Easter eggs and their function has certainly gets out a little more fun.
Hint looks once the files in the plugin folder, start time and the Flexdateien more closely.
The image is currently only filled to about 70% and still offers plenty of room for expansion.

StandardmÃ¤sig it starts with the combination MGcamd / OSCAM, but is on MGcamd / newcs switch if you have figured out how.
Because I run with the birds not so much the hat would have the incorporated files have to be adjusted or something ...

Gracias a bazi98
(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.sat-universe.com%2Fattachment.php%3Fattachmentid%3D204796%26d%3D1270280310&hash=874fe54b8fc97fdd87d7064d0d22e576781866a4)
bazi98 image of 02/04/2010 (http://www.multiupload.com/49PNSPHLM0)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on May 06, 2010, 06:14:05 AM

06.05.2010

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.
----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel(Feb 7) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
06.05.2010

-Testing new tuner drivers

http://www.speedyshare.com/files/22293396/mtd2_06.05.2010.zip (http://www.speedyshare.com/files/22293396/mtd2_06.05.2010.zip)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on May 07, 2010, 06:47:03 AM

zweits Coolstream Image vom 06.05.2010

Warning:

This release will upgrade your Kernel(Feb 7) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
06.05.2010

-New reworked dvb-s tuner drivers
-Satfinder fixed, shall work as expected for now
-Please update your satellite list and be sure
that the FEC used is not wrong as we dont support
auto-fec anymore.
Keep it in mind and dont report bad scan bevore checking
your FEC setup.
-Fix Video drivers for some weird Channels
with low bitrate
-Neutrino fixes for non-standart icon sizes.
Not complete yet, work in progress
mtd2_06.05.2010_B (http://www.megaupload.com/?d=DKP9390Z)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: labud on May 08, 2010, 06:17:36 PM

Software Update SVN 571

Code Select

Blue button:
Tuxcal (Calendar)
Tuxbox Commander (file manager)
Screenshot
Coolstream news
Plugin Buli
Movies Info
~ ~ Reloaded Flex Menu
08.02.2003 by-yweb yjogol
Infobar configurable
Cable & Sat allinone



Emu Management:
In this image no emus and keys are included.

Both via online update nachinstallierbar.

Online installation on the ~ ~ reloaded FlexmenÃ¼
(Blue button> reloaded Flex menu)

Software Update SVN 571 (http://www.megaupload.com/?d=K52UT638)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on May 18, 2010, 04:56:25 PM

Coolstream HD1 neutrino 1.73 by @liensik.zip
2010-05-18Coolstream HD1 neutrino 1.73 by @liensik [url] (http://upload.dvhk.pl/files419/2010-05-18/Coolstream%20HD1%20neutrino%201.73%20by%[email protected])

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on May 21, 2010, 06:38:46 AM

Coolstream HD-1 Original Firmware 20.05.2010

Coolstream HD-1 Original Firmware 20.05.2010

----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel(Feb 7) on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
20.05.2010

- New feature added, CSTLink (CEC)
So far, the system supports right now only the basic functions
such as shared on and off the devices (TV,AV receivers etc.) and
the input selector on the TV.
http://www.megaupload.com/?d=OKMM9BFB (http://www.megaupload.com/?d=OKMM9BFB)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on May 23, 2010, 09:13:27 AM

mtd2 20.05.2010
Coolstream HD-1 Original Firmware 20.05.2010
Coolstream/Images/ mtd2 20.05.2010 (http://np-ulc.net/index.php?action=downloadfile&filename=mtd2%2020.05.2010.rar&directory=01.-%20Receiver/Coolstream/1.-%20Images&)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on May 24, 2010, 06:33:20 PM

Coolstraem HD1 neutrino 1.74 by.aliensik

Coolstraem HD1 neutrino 1.74 by.aliensik

24/05/2010

1.Mgcamd, Oscam
2.Blu panen - flex menu online update
3.scrypty - OSCam Log
4.Media added Internet radio
5.locale EN
6.samba
7.now icon on the toolbar info
http://www.megaupload.com/?d=OXQJ8DN5 (http://www.megaupload.com/?d=OXQJ8DN5)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on June 16, 2010, 07:12:12 AM

Orginal Firmware Coolstream HD
Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
15.06.2010

- Menu for CSTLink (CEC), enable/disable features
- Add AAC Sound support
- Change some defaults for faster first Setup
- Fix Screen default
- Rework coolstream API
- Add Coolstream Neo drivers/gui support
http://www.megaupload.com/?d=SIKKH8UW (http://www.megaupload.com/?d=SIKKH8UW)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on June 20, 2010, 06:06:01 AM

Coolstream HD-1 Original Firmware 20.06.2010 v 1.81

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
20.06.2010

- aac record playback for movieplayer
- some fixes for FP driver
- First Setup changes
- improve Updates check

http://hotfile.com/dl/49460020/05dc5b2/cs181.img.html (http://hotfile.com/dl/49460020/05dc5b2/cs181.img.html)
OR

http://www.speedyshare.com/files/23040615/cs181.zip (http://www.speedyshare.com/files/23040615/cs181.zip)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on July 12, 2010, 09:12:11 PM

Coolstream HD-1 Original Firmware 11.07.2010 v 1.82

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
11.07.2010

- Update to new kernel wich will fix Time
in standby mode
- Add new directfb driver
Fix Games and enable Sound while play
- Fade Menus (can be enabled in OSD Settings)
- Add Save/Restore Settings, you can have multiple
Setting by date. Check "Manage settings" for it.
- Fix Epg Plus
- Fix Frontpanel driver for some missing letters
http://hotfile.com/dl/54232418/4492377/cs182.img.html (http://hotfile.com/dl/54232418/4492377/cs182.img.html)

Title: 13.07.2010 neues original Coolstream Image v1.83
Post by: kargo.25 on July 13, 2010, 09:31:24 PM

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.
----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
13.07.2010

For Coolstream Neo:
- This will resolve the lack of status display
if the VF display not show the current time in
Deep-Standby
(set over menu)

http://hotfile.com/dl/54636848/685df73/cs183.zip.html (http://hotfile.com/dl/54636848/685df73/cs183.zip.html)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on July 15, 2010, 05:38:40 PM

Original Coolstream Image v1.84
Software Update Wizard - Agreement
Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk. #

In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------
Warning:
This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
15.07.2010

- Fix TS clock conversion[/b]

http://hotfile.com/dl/54994480/d8e9fa7/cs184.img.htm (http://hotfile.com/dl/54994480/d8e9fa7/cs184.img.htm)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: kargo.25 on July 25, 2010, 08:50:42 PM

Coolstream Image 1.85 vom 25.07.2010

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.
------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-------------------------------------------------------------------------
26.07.2010

- Enable Frontpanel Standby button to
reactivate STB from deep state
- Some fixes for video driver, where some
"freezes" reported
- Tuner driver fixes for 8psk

http://hotfile.com/dl/57480563/797ef11/cs185.rar.html (http://hotfile.com/dl/57480563/797ef11/cs185.rar.html)

Title: Re: Coolstream HD-1 Images
Post by: labud on July 26, 2010, 06:26:29 AM

Coolstream Neutrino ~reloaded

Emu / Camd Auswahl geÃ¤ndert
FlexMenÃ¼ / Tools verbessert

--> after loading/flashing....make spezialupdate1...into FLEx menu

Thx to TheDuke & Team

20100725-1235-mtd2.zip (http://depositfiles.com/files/99lfttzwj)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on July 26, 2010, 09:54:29 AM

CS_201007212130_KEYWELT_V1.3_Jul_rootfs.tar.gz
Coolstream-KEYWELT V1.3 July Image
CS_201007212130_KEYWELT_V1.3_Jul_rootfs. (http://174.142.43.141/index.php?action=downloadfile&filename=CS_201007212130_KEYWELT_V1.3_Jul_rootfs.tar.gz&directory=01.-%20Receiver/Coolstream/1.-%20Images&)

CS_201007212130_KEYWELT_V1.3_Jul.img.tar.gz
Coolstream-KEYWELT V1.3 July Image
CS_201007212130_KEYWELT_V1.3_Jul.img (http://174.142.43.141/index.php?action=downloadfile&filename=CS_201007212130_KEYWELT_V1.3_Jul.img.tar.gz&directory=01.-%20Receiver/Coolstream/1.-%20Images&)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: aamir11 on August 21, 2010, 12:38:57 PM

original Coolstream Image 21.08.2010

Code Select

- Fix radio channels recording
- Fix Infoviewer text display, add resolution icons
- Fix Neo delayed Shutdown, add LED Menu ON/OFF, menu fixes
- Fix bouquet name in epgplus; Fix bitrate for radio channels;
Show language settings before setup banner
- Fix Teletext in Fade mode
- Use video auto modes only if they enabled in neutrino;
Enable key repeat for number and string choosers menu item

cs186.zip (http://www.2shared.com/file/b6WfMAIP/cs186.html)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: kargo.25 on September 03, 2010, 10:53:05 PM

The image is based on the original image version 1.87 of 23:08:10.

Changes:

1-Image-style in the "holzfreaky" design
2-Flex-MeÃ¼ own with some functions (blue button)
3-Emu menu (OSCAM, newcs & MgCamd selectable)
4-SVN neutrino state: 739
5-Advanced Infobar
6-Various plug-ins by RVK, theobald123, SnowHead, Paule Foul & Co
7-RSS feed support
8-THX for Crypticons and emu Boxcracker display from the image, but also times to look www.bxc.tv (http://www.bxc.tv) ...
9-wide channel logos by theduke
10-msgbox, input, getrc, shellexec by SnowHead
11-current Luj + + + Settings Astra Hotbird
12-other minor adjustments

You can flash the image as normal, via FTP or via a USB stick.

http://hotfile.com/dl/66821362/983831e/EmuMod_02.09.10_by_blackman_coolstream.to.zip.html (http://hotfile.com/dl/66821362/983831e/EmuMod_02.09.10_by_blackman_coolstream.to.zip.html)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on September 06, 2010, 10:31:09 PM

EmuMod 06.09.10 by blackman

Update 06.09.2010

Neutrino SVN Stand: 753
Crypticons und Emu-Anzeige Ã¼berarbeitet
Mgcamd-Einzelbetrieb lÃ¤uft nun ohne Probleme
DEL-Plugin Update auf Version 1.1
neues Yweb: Version 2.8.0.6
diverse kleinere Ã,,nderungen
http://www.megaupload.com/?d=EIWBBTGC (http://www.megaupload.com/?d=EIWBBTGC)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on September 09, 2010, 01:08:59 PM

NG - Coolstreamimage C 0.5

Aktueller Stand (07.09.2010):

- SVN-Revision: 755
- NG-Infoviewer mit ECM-/CA-Info (optionale 3D Icons)
- NG-EMU MenÃ¼ in Neutrino integriert (C++)
- mgcamd, newcs, oscam und gbox im Image
- NG-Image Info
- Grundlegende EMU-Configs vorhanden
- NetFS SERVER-UnterstÃ¼tzung
- Busybox 1.17.1
- fast alle Systembibliotheken und Tools in aktueller Version
- NG-Sendericons fÃ¼r Sat, KD, KabelBW, Primacom, UM
- NG-Dark Theme in Neutrino integriert
- NG-Startlogo
- Support fÃ¼r Eigene-Skripte via:
/var/tuxbox/config/flex/
/media/sda1/flex/
/media/sdb1/flex/
/media/srv/flex/

*TV-Guide (NG-CS-Edition by Sumisu)
*fritzcallmonitor NG-Edition
*links Webbrowser
*tuxcom
*tuxcal
*shellexec
*msgbox
*input
*getrc
*Werbeblocker
*Logomask
*BÃ¶rse
*Wetter
*Tanken
*RSS-News
*Bundesliga
*Formel1
*cooliTSclimax

Danke an snowhead, Paule, bazi, Theobald und vor allem Sumisu fÃ¼r die Addons/Plugins.

Coolstream_NG_C05_Flash.rar
http://www.megaupload.com/?d=PD643Y92 (http://www.megaupload.com/?d=PD643Y92)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on September 09, 2010, 06:58:51 PM

NG-Return CS-Image Version 0.5 USB

- SVN-Revision: 755
- NG-Infoviewer mit ECM-/CA-Info (optionale 3D Icons)
- NG-EMU MenÃ¼ in Neutrino integriert (C++)
- mgcamd, newcs, oscam und gbox im Image
- NG-Image Info
- Grundlegende EMU-Configs vorhanden
- NetFS SERVER-UnterstÃ¼tzung
- Busybox 1.17.1
- fast alle Systembibliotheken und Tools in aktueller Version
- NG-Sendericons fÃ¼r Sat, KD, KabelBW, Primacom, UM
- NG-Dark Theme in Neutrino integriert
- NG-Startlogo
- Support fÃ¼r Eigene-Skripte via:
/var/tuxbox/config/flex/
/media/sda1/flex/
/media/sdb1/flex/
/media/srv/flex/

*TV-Guide (NG-CS-Edition by Sumisu)
*fritzcallmonitor NG-Edition
*links Webbrowser
*tuxcom
*tuxcal
*shellexec
*msgbox
*input
*getrc
*Werbeblocker
*Logomask
*BÃ¶rse
*Wetter
*Tanken
*RSS-News
*Bundesliga
*Formel1
*cooliTSclimax

Danke an snowhead, Paule, bazi, Theobald und vor allem Sumisu fÃ¼r die Addons/Plugins.

Coolstream_NG_C05_USB.tar
http://www.megaupload.com/?d=AB8UE4OL (http://www.megaupload.com/?d=AB8UE4OL)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on September 18, 2010, 08:22:01 AM

17.09.2010 original Coolstream Image

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
17.09.2010

- Fix Frontpanel driver
rework wakeup Function, make menu more
responsive to remote
NOTE (NEO): If you set a timer and shutdown STB
the LEDS will blink to remind you about it.
After recording done, STB will shutdown himself
if user dont cancel (messagebox will appear on
the screen)
- Fix reset STB from frontpanel buttons
You can do this using [MENU + Left] or [VF + UP]
- Dont stop playback in movieplayer when
a timer starts
- Dont freez OSD if CSTlink(CEC) used and
some Function not supported
- Add discrete codes for Logitech
- Fix some crash using icecast (internet radio)
- Update to yweb 2.8.0.7
http://www.megaupload.com/?d=HUY584RV (http://www.megaupload.com/?d=HUY584RV)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: labud on September 27, 2010, 12:44:17 AM

BluePeer HD v1.1

â€¢NEO tauglich
â€¢EMU Management erweitert
â€¢Infoviewer erweitert und angepasst
â€¢Kernel update
â€¢System Info
â€¢BoxCracker Design fÃ¼r yWeb Version 2.8.0.8
â€¢UnterstÃ¼tzung fÃ¼r MgCamd, Gbox, Newcs und Oscam
â€¢Online Imageupdate mÃ¶glich
â€¢Sat und Kabel tauglich
â€¢bXc Bootlogo (Neo only)
â€¢BoxCracker typisch jede Menge Platz
â€¢EMUS und KEYS sind aus Respekt an die Entwickler nicht im Image enthalten

Download (http://www.megaupload.com/?d=H8QEISBP)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on October 03, 2010, 08:36:07 AM

Coolstream Originalimage verfÃ¼gbar 1.89

02.10.10
Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!

- Fix "Black Screen" Problem on Timeshift
- Fix Fastscan crash
- Fix some minor bugs in drivers
- Add under "Settings"->"Manage settings"
Factory reset menu so you can clean the flash
if needed.
- Init drivers in 1080i Mode
- Fix some minor OSD bugs
- You can install from now some ready Channel Settings
using Internet Update menu.
http://www.megaupload.com/?d=429BP08U (http://www.megaupload.com/?d=429BP08U)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on October 11, 2010, 04:23:12 PM

11.10.2010 neues original Coolstream Image online 1.90

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
----------------------------------------------------------------------------------

Warning:
This File will renew the Software and you will lose the old Settings,
to keep old Setting please use Partial Updates in the Software List
if available(simple_update.txt Section).You must have version 1.90 or
higher already installed.
This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
11.10.2010

Critical Update
- Bugfixes for Video driver
- Enable vbi driver

Nach dem Update auf 1.90 soll man 3 Sektionen im Updatemodus verfÃ¼gbar haben:

1. Basis Image
2. Channel Lists
3. Addon Update
http://www.megaupload.com/?d=K6Y3OWZA (http://www.megaupload.com/?d=K6Y3OWZA)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: kargo.25 on October 16, 2010, 03:11:04 PM

The anox 0.3b
anox 0.3b

Podstawa: oryginalny firmware 1.90 z 11.10.2010
Neutrino: SVN rev 839 + moje modyfikacje
Y-Web: 2.8.0.8

Zmiany:
-poprawiony drobny błąd w menu zarządzania emulatorami
-dodane opcje automatycznego wyłączania emulatora/serwera w trybie gotowośc
-dodane pokazywanie adresu serwera CW na belce informacyjnej (domyślnie wyłączone)
-dodana opcja Img2USB (funkcje zaawansowane)

Base: original firmware 1.90 (11.10.2010)
Neutrino: SVN rev 839 + my modifications
Y-Web: 2.8.0.8

Changes:
-fixed small issue in emu management menu
-added options to automatically disable softcam/cardserver in standby
-added display of CW server address on the infobar (disabled by default)
-added Img2USB option (expert functions)

http://www.megaupload.com/"] (http://"[url)anox-0.3b-flash[/URL]

http://www.megaupload.com/?d=HYXS5AAB"] (http://"[url)anox-0.3b-usb[/URL]

Title: Re: Coolstream HD-1 EMU Firmware
Post by: kargo.25 on October 16, 2010, 03:11:04 PM

Title: Re: Coolstream HD-1 EMU Firmware
Post by: macro on November 08, 2010, 05:48:52 PM

NG-Return CS-Image Version 1.1 (FLASH + USB)
08-11-2010

NG-Return CS-Image Version 1.1 (FLASH + USB)

- SVN-Revision: 881
- NG-Infoviewer mit ECM-/CA-Info
- NG-EMU MenÃ¼ in Neutrino integriert
- mgcamd, newcs, oscam und gbox im Image
- NG-Image Info
- Sambaserver
- Treiber fÃ¼r 8in1 Cardreader und HID/USBHID integriert
- OSD Scart Fix (Workaround fÃ¼r alte Plasma- oder RÃ¶hrenmonitore)
- NetFS SERVER-UnterstÃ¼tzung
- 4 frei wÃ¤hlbare Iconsets fÃ¼r die Infobar
- NG-Sendericons fÃ¼r Sat, KD, KabelBW, Primacom, UM, KMS
- NG-Dark Theme und NG-Red Theme in Neutrino integriert
- NG-Startlogo
- Onlineupdate
- Kernelupdate
- Support fÃ¼r Eigene-Skripte

*TV-Guide (NG-CS-Edition by Sumisu)
*fritzcallmonitor NG-Edition
*Links2 Webbrowser
*tuxcom
*tuxcal
*shellexec
*msgbox
*input
*getrc
*Werbeblocker
*Logomask
*BÃ¶rse
*Wetter
*Tanken
*RSS-News
*Bundesliga
*Formel1
*Handball
*DEL
*VFDClock
*cooliTSclimax

ImagegrÃ¶sse: 73%

Danke an snowhead, Paule, bazi, Theobald, rvk, Alfredo01 und Sumisu fÃ¼r die Addons/Plugins/Icons. Dank auch an seife fÃ¼r das geniale Buildsystem.

Im Image befinden sich KEINE EMU-Konfigurationen. Diese MUSS jeder User selbst einspielen.

Im Anhang findet ihr eine passende update.urls welche euch ermÃ¶glicht unser Image direkt aus einem Orginalimage heraus zu flashen.
Das File kommt nach: "/var/etc" Die vorhandene update.urls bitte einfach Ã¼berschreiben.

Weiters findet ihr im Anhang unsere neue linuxrc. Diese wird benÃ¶tigt wenn ihr unser Image via USB aus einem Orginalimage heraus booten wollt.

Zudem findet ihr das Image natÃ¼rlich in KÃ¼rze in unserer Datenbank.

Euer NG-Team!

Code Select

http://www.fileserve.com/file/zKvDzDV

Title: Re: Coolstream HD-1 EMU Firmware
Post by: macro on December 04, 2010, 06:52:29 PM

04-12-2010

NG-Return CS-Image Version 1.2 (FLASH + USB)

Quote- SVN-Revision: 921
- NG-Infoviewer mit ECM-/CA-Info
- NG-EMU MenÃ¼ direkt in Neutrino
- mgcamd, newcs, oscam und gbox im Image
- NG-Image Info
- NG-HDD Info
- Sambaserver
- NFS-Server (unfsd)
- NFS-Server-UnterstÃ¼tzung via FlexmenÃ¼
- Treiber fÃ¼r 8in1 Cardreader und HID/USBHID
- OSD Scart Fix
- 4 frei wÃ¤hlbare Iconsets fÃ¼r die Infobar
- NG-Sendericons fÃ¼r Sat, KD, KabelBW, Primacom, UM, KMS
- NG-Dark Theme und NG-Red Theme
- NG-Startlogo
- Onlineupdate
- Kernelupdate
- Support fÃ¼r Eigene-Skripte

*TV-Guide (NG-Edition by Sumisu)
*fritzcallmonitor (NG-Edition mit user/pwd fÃ¼r das yWeb)
*Links2 Webbrowser
*tuxcom
*tuxcal
*shellexec
*msgbox
*input
*getrc
*Werbeblocker
*Logomask
*BÃ¶rse
*Wetter
*Tanken
*RSS-News
*Bundesliga
*Handball
*DEL
*VFDClock
*Haltestellen Fahrplan
*cooliTSclimax

ImagegrÃ¶sse: 71%
Image ist fÃ¼r NEO, HD1 und ZEE (ungetestet) geeignet.

Danke an snowhead, Paule, bazi, Theobald, rvk, Alfredo01 und Sumisu fÃ¼r die Addons/Plugins/Icons.
Danke auch an seife fÃ¼r das geniale Buildsystem.

Im Image befinden sich KEINE EMU-Konfigurationen. Diese MUSS jeder User selbst einspielen.

Im Anhang findet ihr eine passende update.urls welche euch ermÃ¶glicht unser Image direkt aus einem Orginalimage heraus zu flashen.
Das File kommt nach: "/var/etc" Die vorhandene update.urls bitte einfach Ã¼berschreiben. Wer unser Image bereits im Flash hat braucht diese Datei natÃ¼rlich nicht. ;)

Zudem findet ihr das Image natÃ¼rlich in KÃ¼rze in unserer Datenbank.

Euer NG-Team!

P.S. Hier noch ein paar Screenshots von einigen der neuen Features

NG-Return CS-Image Version 1.2 USBversion

Code Select

http://www.4shared.com/file/IIVv8XTy/NG-Return_CS-Image_Version_12_.htmlNG-Return CS-Image Version 1.2 Flashversion

Code Select

http://www.multiupload.com/FGN1IPCGOU

Title: Re: Coolstream HD-1 EMU Firmware
Post by: labud on December 23, 2010, 09:19:55 AM

[Release] NG-Return CS-Image Version 1.3 (FLASH + USB)

- SVN-Revision: 953

Changelog zur Version 1.2:

- Image ist fÃ¼r HD1, NEO und ZEE geeignet
- aktuelle GBox (svn763)
- OSCam-Monitor Widescreen NG-Edition von FlatTV
- Fix openssl fÃ¼r MGCamd EMU-Betrieb
- issue.net erweitert
- immer aktuellste oscam incl. SSL Support (Eigenkompilat)
- Fix CARD Anzeige fÃ¼r OSCam-API
- Fix OSCam-API CA-Icons
- Rezap nach OSCam start hinzugefÃ¼gt
- openssl 0.9.8q
- curl 7.21.3
- e2fsprogs 1.41.13
- util-linux-ng Target optimiert
- Smartmontools werden nun immer als neueste SVN Version gebaut
- Logoanzeige in Kanalliste wieder rausgepatcht wegen GUI flackern
- Fix GBox NET Icon im Infoviewer (THX SCREM!)
- voller NTFS Support (ntfs-3g-2010.10.2)
- eigene Kernelmodule (evdev, hid, usbhid, pl2303)
- neues HauptmenÃ¼ Icon
- NG X-Mas Startbild
- kleine Ã,,nderungen in den locales

Download flash (http://depositfiles.com/files/pg9j5a6j2)

Download USB (http://depositfiles.com/files/eskq6fate)

Title: Re: Coolstream HD-1 EMU Firmware
Post by: antox on January 08, 2011, 08:02:44 AM

BluePeer HD v1.2

BluePeer HD v1.2

Changes:

* HD1 - BSE - NEO und ZEE tauglich
* Coolstream-SVN: Revision 996
* AddOnManager: Uninstaller kann nun Seitenweise scrollen
* Bootoptions-MenÃ¼: Treiber initialisieren
* Bootoptions-MenÃ¼: interne Stromversorgung (nur HD1)
* Bootoptions-MenÃ¼: Fernbedienungs-Auswahl
* Dateisystem: Optimierung der Ãœbernahme der eigenen Einstellungen
* Dateisystem: geÃ¤nderte Startskripte
* Dateisystem: Device Mount optimiert (thx Seife ...)
* EMU-Management: Nur noch installierte Cams auswÃ¤hlbar
* Infoviewer: Anzeige COM bei gbox und ext Reader
* Infoviewer: Anzeige CARD bei decodieren mit CI
* Infoviewer: Anpassung diverser Iconfarben
* Infoviewer: VolumenBar Ã¼ber das OSD-MenÃ¼ auswÃ¤hlbar
* Infoviewer: fÃ¼llstandsabhÃ¤ngiger Farbwechsel der FÃ¼llstands-Icons
* Infoviewer: graues Movie-Icon bei nicht gemountetem Aufnahmeordners
* Infoviewer: VolumenBar Ã¼ber MenÃ¼ einstellbar
* Infoviewer: Ãœbersicht der gemounteten Hardware
* Infoviewer: Schatten bei Infotext
* Infoviewer: Anzeige der CI Module (gesteckt/dekodiert)
* Infoviewer: oscam mit DVB-API integriert und Code optimiert
* OSD: Nummerische LautstÃ¤rkeanzeige
* Sonstiges: Neue Form der update.urls
* Sonstiges: Portmap Fix
* Sonstiges: Fix News Anzeige bei geÃ¤nderter OSD AuflÃ¶sung
* YWEB: Ãœberarbeitung bXc-Design
* YWEB: Emu-Steuerung hinzugefÃ¼gt
* Online Imageupdate mÃ¶glich
* Sat und Kabel tauglich
* bXc Bootlogo (Neo und ZEE only)
* BoxCracker typisch jede Menge Platz
* EMUS und KEYS sind aus Respekt an die Entwickler nicht im Image enthalten

Thx BoxCracker
http://www.multiupload.com/QGGW8R3TB0 (http://www.multiupload.com/QGGW8R3TB0)

Title: Coolstream HD-1 EMU Firmware
Post by: pumparica on June 10, 2011, 02:08:12 AM

C/P

My BACKUP ^reload^ img v203 ITALIANA svn1522 for italian lovers
Based on v203 SVN 1522 BETA sum Image NEO / HD1 BSE / ZEE /SAT del 05 06 2011

SETTING motor Vhannibal 07 06 2011 (sky change ok)
with iomeali italian flexmenu and italian news sport cronaca etc

Italian
Iomeali-NEWS ,sport, meteo,lastminute,italian king of sat,
la gazzetta dello sport,la repubblica,il corriere della sera,La Repubblica,il corriere dello sport........e others

Italian webinterface

Numeri MenÃ¹ e caratteri menÃ¹ ingranditi

Emu already aktiv oscam dvbapi
Emu attivabili Mgcamd,Gbox,Newcs

Pronta con configurazione per tessera TiVÃ¹sat funzionante/aggiornante.(puÃ² necessitare di riavvio),Possibile attivazione nuove card.

Ecminfo e ecm reset in evidenza tasto blu reload flexmenÃ¹

pannello emu e key onlinee , varie scelte

W-LAN testata(non da me) con Dlink DWA-133 wireless N device,e altre, configurabile anche da menu Network(o da FTP)

Presenti come al solito, tutti gli altri plugin addons per scaricare onlinee softcam,emu,setting e plugin.

Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/XJWERA42II)

Cardsharing-x Forum

» Receivers « => Other HDTV Receivers => » HDTV « => Coolstream HD-1 => Topic started by: antox on December 24, 2009, 10:24:04 AM