hallo
I have a problem with dreambox 500
When you want it Flasch over DreamUp is unable to make flasherase.
Whether through another program to make flasherase??
Always throw:
COM: The hardware detected a break condition.
14:32:01 box type: DM500
14:32:10.249 server: got discover packet, ip 0.0.0.0, baud 115200
14:32:10.259 server: ATTACHED box!, temporary, ip 0.0.0.0, baud 115200
14:32:10.369 Ping result: OK, box is alive and speaking to us ;-)
14:32:41.979 erasing complete flash (without bmon stage of course)...
14:33:12.520 server: retry 1
14:33:13.530 server: retry 2
14:33:14.540 server: retry 3
14:33:15.550 server: retry 4
14:33:16.520 ERROR, flash-erase failed, box will be unusable now!!
T H A N K S
are you using the right cable? i got mine from maplins
kabel is god
hallo
dreambox 500 clone
when I want to make DreamUp flash with erase this image DreamUp articles
9:04:11 Found no valid JFFS2 in image, flash-erase not supported
Does anyone know what to do THANKS
try with erase image for dm500
Quote from: nadse;98312kabel is god
hallo
dreambox 500 clone
when I want to make DreamUp flash with erase this image DreamUp articles
9:04:11 Found no valid JFFS2 in image, flash-erase not supported
Does anyone know what to do THANKS
Install DreamUp for Dreambox 500 and read instructions for flashing the image.
The cable should be properly secured with screws.
ne pomaze ništa,
only write flash erase failed