MediaCASTool User Guide.pdf
Instructions for setting up of CS via cccam newcamd or as a client
Head Medi@link Black Panther - Network Configuration
Head Medi@link Black Panther - User manual in German
User manual in German
Mit Bilder
Native CCcam Medialink ML9700
Guide
test so after some time I have now manage it the CCcam.mipsel
originally shown on the TV directly into the media link (also called server) is working.
Smargos be integrated and distributed the cards.
Tested with King hub and three Smargos. (Internal card slot can
are not included)
Prerequisite:
Installed MultiCAS
FTP root access with write permission
the installation instructions here:
the existing folder structure and everything kept clean by FTP to the ML
. Copy
The box restart.
After rebooting, we have a new item under Add-ons Control Module
"CCcam 2.1.4" start this as usual with the red button. The CCcam.cfg is
found at / DISK2/EMU/OpenXCAS/CCcam / customer requirements and is accordingly
configured.
Since we are currently on the media link not directly access the CCcam
may need to be registered in the MultiCAS the appropriate Line
(As the IP must be removed from Medialink). So, now we can internally
CCcam and access the same address multiple cards or server.
The interface is about ip.der.ml.box: 16001 reached
Under the CCcam.mipsel / DISK2/EMU/OpenXCAS/CCcam / against any version
be replaced.
Thx Sanja9
cardsharing anleitung mit bilder medialink black panther
BlackPanther_sharing_EN
HE@D_SD7200_BlackPanther_User-Manual
Info:
Engl. Handbuch für den:
SD7200 BP Cable
Booting problem Rebooting problem my Head Medialink ML 9700 full hd
Quote from: pulla22 Booting problem Rebooting problem my Head Medialink ML 9700 full hd
help oliver
[email protected] send the mail g.morning
Quote from: antox;55276Native CCcam Medialink ML9700
Guide
test so after some time I have now manage it the CCcam.mipsel
originally shown on the TV directly into the media link (also called server) is working.
Smargos be integrated and distributed the cards.
Tested with King hub and three Smargos. (Internal card slot can
are not included)
Prerequisite:
Installed MultiCAS
FTP root access with write permission
the installation instructions here:
the existing folder structure and everything kept clean by FTP to the ML
. Copy
The box restart.
After rebooting, we have a new item under Add-ons Control Module
"CCcam 2.1.4" start this as usual with the red button. The CCcam.cfg is
found at / DISK2/EMU/OpenXCAS/CCcam / customer requirements and is accordingly
configured.
Since we are currently on the media link not directly access the CCcam
may need to be registered in the MultiCAS the appropriate Line
(As the IP must be removed from Medialink). So, now we can internally
CCcam and access the same address multiple cards or server.
The interface is about ip.der.ml.box: 16001 reached
Under the CCcam.mipsel against any version
be replaced.
Thx Sanja9
Hi,
Why, we can't use
/ DISK2/EMU/OpenXCAS/CCcam / to decrypt channel.....ie If we spots multicas and use cccam actived....can we use something to get cccam works in hop0 (client and server) like oscam with the option of api=yes?
Thanks.