upgrade the SW for PVR800:
(https://www.cardsharing-x.com/proxy.php?request=http%3A%2F%2Fwww.sadoun.com%2FSat%2FProducts%2FWorldDVB%2FDVBS2PVR_small.jpg&hash=bed4d1e35763f231254b2af6850ca816bedf2871)
upgrade the SW for PVR800:
if u got PVR800, u can download the upgrade file to update ur STB.
1. unzip the file( HDS2_flag_0125-2MC.zip ) to U disk or HDD USD Disk root list.
2. then plug the U disk to STB.
3. press " MENU"--Tool--Upgrade By USB.
4.then OK.
this SW is customer version,add Multi-CAS and CCcam share protocol !!
Helo, antox do you any idea about plugings for solomend apreciate your fabor
Neue Firmware für Solomend 800PVR / HDS2_ALL_0325
Habe gerade die neue Firmware für den Solomend
800 PVR bekommen.
Unterstützt werden jetzt folgende Emus:
CCCAM+NEWCAMD+MGCAMD
Die Firmware wird über USB-Stick eingespielt.
(Vorher entpacken)
Don't working this dowploading
do factory reset,then upload from usb,factory recet again, (pozz) ok.
Ok, Bullsat apreciate your help a025
hi!
mgcamd plugin is not working because not possible to upload newcamd.list.... without that priority and replace list is just usless
and not possible to connect to newcamd using Cccam as well
new software
how i can put server information on this
http://www.cardsharing-x.com/index.php?action=dlattach;topic=14296.0;attach=24443,try (http://www.cardsharing-x.com/index.php?action=dlattach;topic=14296.0;attach=24443,try) this,for the rest we wait. ffhljhghhhj
Quote from: Bullsat new software
Thx for new soft! any Readme?
@BP
Solomend PVR800 Chaneleditor mit Anleitung
Solomend PVR800 Chaneleditor mit Anleitung.
Thanks friend,do you have a working CCcam.cfg or something that makes this box working[you know],i am new in cardsharing etc,any help is wellcome, (pozz)i put CCcam.cfg on usb also constantsw but the box dont read,what i have to do?
same mistakes in new software as I've mentioned above
still have no chance to test CCcam.... but newcamd does not work at all
sorry to say but even carpenter could write the software better.
I have this model as a test for for 4 month for now and can not see any improvements....I believe this model is just waste of time
Software deals with Dngel Twain
I make to say this reciver work fine with CCcam and excelent work with newcamd
i make some tests with Cccam servers connection and on my server work good
there i put CCcam cfg file like example , just need put your server information inside and save to reciver
Bravo
Quote from: boom I make to say this reciver work fine with CCcam and excelent work with newcamd
i make some tests with Cccam servers connection and on my server work good
there i put CCcam cfg file like example , just need put your server information inside and save to reciver
Bravo
no it does not work for me using newcamd
besides I believe in your config DES key is missing for newcamd
Firmware für Solomend 800PVR_NM-HDS2_CMT_15.04.2010
Neue Solomend Firm von Ende Mai
Neue Firm von ende Mai.
Wie immer gilt:
Testen auf eigene Gefahr!
New Firmware 28-5-..10
Hi
I can load the cccam file
please advice
many thanks
I am looking for Solomend HD PVR 800 where to get it ? (pozz)
www.wydvb.com (http://www.wydvb.com),check here.
,
Thanks bro, for the reply. ffhljhghhhj
Quote from: Bullsat New Firmware 28-5-..10
There seems to be newer firmware available for the SatHawk variant of this STB (same hardware) which fixes the AC3 problem and also the problem with not being able to use a Disecq switch with motorized system. However, if you use this firmware you will find there is
no cccam available.. There is no call for cccam in US it seems!
1 step forward and 2 steps back 4fvgdaq_th
Is there any firmware that fixes the AC3 problem, fixes the Disecq problem AND still has cccam support?
Solomend HD PVR800 - 120710
+ improved blind fast scan
+ improved cccam fast connect to server
+ licensed AC3 code
+ add manual edit cccam and key by remote
+ add DiSEqC and switch the same time work
+ setting CA/CI the same menu show
What should i do If i'am failure when upgrading the firmware on solomend hd pvr 800?
Quote from: cyberworld23 What should i do If i'am failure when upgrading the firmware on solomend hd pvr 800?
Please describe exactly how you are trying to do this and what happens when you try to upgrade the firmware.. Then maybe someone can give you some advice.
N line not working on my Solomend HD. Any tips n tricks? acigar.
SatHawk/Solomend HD PVR800 Fw Version HDS2-1.0.0-0204-2-MC
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
Version HDS2-1.0.0-0204-2-MC
SatHawk/Solomend HD PVR800 Fw Version AC3 and Motor/Switch fix vom 30/06/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
Version AC3 and Motor/Switch fix vom 30/06/2010 !
Are these newer firmwares?
Do they have AC3 with CCcam?
Hi,
Is there anyway on flashing new firmware onto this box apart from using the USB, as box I have got here just hangs on the LCD saying 'on'?
Thanks
Calisto
there is a serial loader for it attached, you will need a null modem cable, connect it to your pc, start the software and choose the firmware file, as soon as you press next (for it to start looking for the box) turn the receiver on and it should sync and upload the firmware
Thanks have tried that but cannot get it to connect, comes up in the serial loader saying there is an error in stb memory
With regards the lack of sound on the HD channels.
Did I hear somewhere that some people were able to get sound by configuring their set up so that the sound didn't come through the HD cable but elsewhere ? If so may I enquire as to how, so I can have a go at doing it myself.
You can hook it up to an external amp
Hi All,
I am very intersted in this reciever , but I heard that this is the last software/firmware we will have for this reciever
QuoteSatHawk/Solomend HD PVR800 Fw Version AC3 and Motor/Switch fix vom 30/06/2010
And even this one does not have CCCAM any more .
that cant be right i hav the skybox s9 that shipped with july firmware see prev posts... and ccam seems to work. i just need a cline now for sly hd uk
its deffinately a good buy. i dnt have hdmi audio issues.
Where do you download firmware for this reciever ?
How do you know you have the latest one ? what version do you have ?
Where did buy it from ?
Hi
Will there be a software with Cccam 2.1.4 and the possibility to load a CCcam.prio?
thx for your answers
Quote from: vipersvcd Where do you download firmware for this reciever ?
How do you know you have the latest one ? what version do you have ?
Where did buy it from ?
Just go back 1 page on this thread its here HDS2 10-07-12 (july 12th 2010) posted by Antox on page 2 of this thread
I think he would know which is the latest firmware for these boxes.
Bought mine off ebay it came with this July firmware.
Could someone kindly lend me a cline for testing purposes only pls.
Have sent you a PM irfy
Hi peeps i was wondering is there a way of making the EPG work better? also is there a way of telling which version of ccam in on the stb. Would it matter if the server you go with has a newer ccam version like 2.1.4 & what if the box has 2.1.3 or older.
Sorry for being such a noob
Latest firmware on here comes with CCcam 2.1.3 and it connects fine to a server running 2.1.4
As for the EPG I think we will have to wait and see what the dev's will do with it.
Thanx for the info thats great i hear that 2.1.3 for some reason is more stable. I might be wrong. I have been spending hours on this box now this is what ive found:
1 major issue i had was i just switched channel to sky sports HD2, then box went on a reboot loop. every time i pressed a button on the remote the STB would just keep rebooting. This has happend to me 3 times now. This is very annoying you have to press menu at the right time just so you can reset to factory defaults.
I tried changing the display output from 1080i 60hz to 1080i 50hz (sly broadcasts in 50hz only from what ive read) so far no crash. i really hope it dnt happen again.
audio sometime goes out of sync and get screaching noise (only sometimes) most of the time everything works fine. I hope this gets fixed in the next update.
It would be nice if you could play divx and avi files like the spiderbox, coud this be possible?
i have the same problem with sky sports (only at 28 ) my solomend reboot
Quote from: babis64 i have the same problem with sky sports (only at 28 ) my solomend reboot
Hi what frequency is your Sky sports HD 1 2 3 4
Its funny ive now changed back to 1080i 60hz it not rebooting so that couldnt have been the cause.
Quote from: irfy Quote from: babis64 i have the same problem with sky sports (only at 28 ) my solomend reboot
Hi what frequency is your Sky sports HD 1 2 3 4
Its funny ive now changed back to 1080i 60hz it not rebooting so that couldnt have been the cause.
Sky sports news makes mine reboot. im hoping the new hd version of it will remedy it
Is there a new firmware for this receiver?
Quote from: hooley Quote from: irfy Quote from: babis64 i have the same problem with sky sports (only at 28 ) my solomend reboot
Hi what frequency is your Sky sports HD 1 2 3 4
Its funny ive now changed back to 1080i 60hz it not rebooting so that couldnt have been the cause.
Sky sports news makes mine reboot. im hoping the new hd version of it will remedy it
It happen to me ive tried it now. But try freq 12148/27500 this one works without rebooting <--- -dont try this mine is on the dreaded reboot loop. EDIT If you get this constant rebooting, just disconnect the sat feed then change the channel to something that works proper then redo your sat feed. Thank god i didnt hav reset to defaults.
These work fine no reboots.
Sky sports HD1 11798/29500
HD2 11720/29500
HD3 12363/29500
hd4 12344/29500
Eurosport HD 11856/29500
ESPN HD 12324/29500
ESPN Amrca HD 12324/29500
there are more freg. than the skysport1 and happens only at 28,2 Astra every time i try some channels my receiver reboot
I will never buy this receiver because it does not support CCCAM.PRIO
Why do you need that?
Prio list for CCcam is very important especially with channels/providers which use several system codes, and is good to set which system open channel first ,
This improves the speed of zapping , and you do not get channels that take 20-30 sec to open
While the search of the coding system/card that opens the channel
real cccam reads this file first every time a channel is selected.
It dont take long to change channels, just over a second. Does anyone get crackly audio from time to time on HD channels ??
We need a firmware fix for the reboot issue and AC3 audio pls
*** Edit i found this firmware from this site sat-universe.com (Member Data) he states its latest 08/08/10 i tried it but the version is the same as i had before. (July)
*** Any ways it seems my audio glitch is still there. All channels have been sorted into favs for sky uk 28.2. Also the channels that cause the Reboot issue have deleted.
Im testing this firmware now so far its working fine, only thing you may need to re-arrange some channels in order. Delete his ccam details and use your own.
It is the July firmware with channels sorted into favorites and the bad ones deleted.
I know because I made it, lol (Ibcus = Breed)
Edit: I told him to remove cccam settings if he was going to post it
Quote from: ibcus It is the July firmware with channels sorted into favorites and the bad ones deleted.
I know because I made it, lol (Ibcus = Breed)
Hi thanx for clearin that up i found the firmware on another site cos he stated it was 08/08 latest i downloaded it in a flash.
I cant open sky germany HD Progs over C-Line (C-Line is ok and works fine in Dream 800HD no problems) , all other progs are open, i dont know why sky germany HD progs won`t open, pleaseeeeeeee help me
Same problem with ALL french HD Channels ! I think this decoder need a CCcam.prio !
New problem : cannot scan some transponders from ASTRA 19.2E (especially canalsat, canal+ transponders)
Need a firmware upgrade from developpers rapidly !!! connie_13
The file from the openbox ends on .dbs but this program does not support it.
However you can change de ending dbs to .abs and then open the file with this program.
It will suport it.
Then after saving you need to alter it back to .dbs
Quote from: antox The file from the openbox ends on .dbs but this program does not support it.
However you can change de ending dbs to .abs and then open the file with this program.
It will suport it.
Then after saving you need to alter it back to .dbs
looks familiar a025
Quote from: antox The file from the openbox ends on .dbs but this program does not support it.
However you can change de ending dbs to .abs and then open the file with this program.
It will suport it.
Then after saving you need to alter it back to .dbs
No, you can use directly yhe .ABS file.
935343 Mad box. Trying all chid all the time for 1rd3t0. Cant detect valid and invalid chid. connie_13
Experts are requested to do something.
vjihhh For conax working great vjihhh
SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 04/10/2010 ! <<<
Quote from: antox SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 04/10/2010 ! <<<
hehe Only Background changed :D
http://www.cardsharing-x.com/index.php/topic,14296.135.html
SatHawk/Solomend HD PVR800 Fw Version vom 20/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 20/10/2010 ! <<<
Changelog:
NM_HDS2_CMT_1010200755
1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as serverr
SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 04/10/2010 ! <<<
Quote from: antox SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 04/10/2010 ! <<<
hehe Only Background changed :D
http://www.cardsharing-x.com/index.php/topic,14296.135.html
SatHawk/Solomend HD PVR800 Fw Version vom 20/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 20/10/2010 ! <<<
Changelog:
NM_HDS2_CMT_1010200755
1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as serverr
SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 04/10/2010 ! <<<
Quote from: antox SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 04/10/2010 ! <<<
hehe Only Background changed :D
http://www.cardsharing-x.com/index.php/topic,14296.135.html
SatHawk/Solomend HD PVR800 Fw Version vom 20/10/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 20/10/2010 ! <<<
Changelog:
NM_HDS2_CMT_1010200755
1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as serverr
SatHawk/Solomend HD PVR800 Fw Version vom 08/11/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 08/11/2010 ! <<<
Changelog:
What's New:
1 .. Sat List contains a number of additional satellites.
2 .. CA Slot Settings additional feature included 'Edit Smartcard Config' which seems to be for 1rd3t0 based cards.
3 .. When entering Hex values in Key sections, the symbols are no longer recognised.
An example of this would be:
Enter 1 and only 1 is displayed, Enter 2 and you still get the option of a b c 2, as the letters a-f are included in Hex values.
The following numbers 0 1 4 5 6 7 8 9 will enter directly, making it much easier, and quicker to directly enter any Hex keys.
And entering BISS Keys will still achieve nothing, which is a shame.
I have also noticed, that the modified date of this official release is, '01 January 2008, 01:28:58' which seems rather odd ?.
SatHawk/Solomend HD PVR800 Fw Version vom 08/11/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 08/11/2010 ! <<<
Changelog:
What's New:
1 .. Sat List contains a number of additional satellites.
2 .. CA Slot Settings additional feature included 'Edit Smartcard Config' which seems to be for 1rd3t0 based cards.
3 .. When entering Hex values in Key sections, the symbols are no longer recognised.
An example of this would be:
Enter 1 and only 1 is displayed, Enter 2 and you still get the option of a b c 2, as the letters a-f are included in Hex values.
The following numbers 0 1 4 5 6 7 8 9 will enter directly, making it much easier, and quicker to directly enter any Hex keys.
And entering BISS Keys will still achieve nothing, which is a shame.
I have also noticed, that the modified date of this official release is, '01 January 2008, 01:28:58' which seems rather odd ?.
SatHawk/Solomend HD PVR800 Fw Version vom 16/11/2010
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 16/11/2010 ! <<<
Changelog:
What's New:
Added: CCcam priority option
On bootup: Now it only displays Server 1 - Server 2 - Server 3 etc inplace of your cline info
Security Password: When entering secure sections such as the CCcam section, you will need to enter the Password 0 0 0 0
Other: A number of minor fixes has also been addressed.
I have noticed a rather bad error in this version, the receiver will reboot if you attempt to make a full dump file,
you can however make misc file dumps okay ....
And as this is an official release, you will be required to add your own channel list, replace.list and priority file.
All Software down for conax ( Indian provider Dish tv). Decoding only Audio but no Video. connie_13
SatHawk/Solomend HD PVR800 Fw Version vom 06/01/2011
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
>>> Version vom 06/01/2011 ! <<<
The New Official Firmware version do not include any channels.
Changelog:
Zitat:
What's New:
In version [HDS2-11-01-02:0899CMT] the following have either been added, fixed or changed:
1 .. Making a full system dump is now fixed.
2 .. CCcam Priority option added.
3 .. Constant cw and Biss fixed.
4 .. Security Password when entering sections such as the CCcam section, has now been deactivated.
5 .. On Bootup, the display will once again show the IP Address used in your clines.
Well over 200 new or updated channels on various satellites.
Re-organised channel list on a number of satellites.
A number of non accessable channels removed from various satellites.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.