Install the tar file ... Panel DCC .. then go to the DECO, green button and install plugins manually.
Then go in var / bin and replace the file with that OSCAM attached.
Restart OSCAM + CCcam from Deco (blue button)
Wait a bit and there was light ...
I recommend you do any transaction with the card inserted, and on channel 7
Oscam for Qbox HD
16 May 2010
RELEASE 2288.0 QboxHD
(...omissis...)
**** CHANGELOG ****
> 2288.0 16/05/2010
- many cccam protocol improvement
- Radar 4.6 looks to have a bug and OSCam cannot work properly. Please use Radar 4.5 firmware
30 May 2010
RELEASE 2345.0
********* BAD *********
- There is a bug in OSCam >2309 involving DVBAPI. OSCam MUST BE STARTED while watching an FTA channel. Wait solution from developers.
- OSCam QBoxHD CANNOT work with FD 01/03 and earlier : demux device ( /dev/dvb/adapter?/ ) miss "ca0" device and OSCam cannot work. OSCam QboxHD works fine with FD 19/03 and later
********* GOOD *********
- Works as simple client and server
- Enabled local card overclock for internal cardreader (only 5.00 Mhz and 6.25 Mhz), see TIPS&TRICKS
- Compiled with support for PCSC USB card reader (thanks to linch)
********* WHERE IS ? *********
OSCam files are in QboxHD /var/oscam directory
- file oscam-nowebif.sh4 : executable (run it with start_oscam shell script) compiled without WebIf
- file oscam-webif.sh4 : executable compiled with WebIf
- file oscam-nowebif-pcsc.sh4 : executable compiled without WebIf and with PCSC
- file oscam-webif-pcsc.sh4 : executable compiled with WebIf and with PCSC
- file start_oscam : shell script to run OSCam (you can change debug level, WebIf and PCSC)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples
********* CHANGELOG *********
> 2345.0 30/05/2010 - There is a bug in OSCam >2309 involving DVBAPI. OSCam MUST BE STARTED while watching an FTA channel. Wait solution from developers. I suggest you to zap to a FTA channel, then zap again to another FTA channel and now start OSCam
- (thanks to linch) now OSCam QboxHD include PCSC USB card reader support. Tested with a simple USB reader "OMNIKEY 1021" and it works fine.
OSCam now is compiled with:
pcsclite 1.6.0 http://pcsclite.alioth.debian.org/ (http://pcsclite.alioth.debian.org/)
ccid 1.3.12 drivers http://pcsclite.alioth.debian.org/ccid.html (http://pcsclite.alioth.debian.org/ccid.html)
libusb-0.1.12 legacy (needed by PCSC)
libusb-1.0.8 for future SmartReader support (until now it doesn't work due to problem in Linux ST kernel: it's old. SmartReader require kernel >=2.6.30)
Edit start_oscam and choose if you want (or not) WEBIF and PCSC support. If you enable PCSC, starting OSCam require about 20 seconds (it needs to start PCSC daemon too)
If you are not interested in these features, please don't enabled them: you save resources !
- If you have errors untarring oscam-2345.0-qboxhd_update.tar.gz (symlinks are not permitted in a FAT device like USB pendrive) don't worry: during update symlinks are automatically created for you
Quote from: Tirkic Install the tar file ... Panel DCC .. then go to the DECO, green button and install plugins manually.
Then go in var / bin and replace the file with that OSCAM attached.
Restart OSCAM + CCcam from Deco (blue button)
Wait a bit and there was light ...
I recommend you do any transaction with the card inserted, and on channel 7
Hi.
I´m from Brazil and a QBOX ONE (duolabs) was found in my desk! I have a DM500S too and now my intention is to make than work.
But, in my long vacation, i´ve been not updating in this stuffs.
Could you help me with some information?
1. what kind of card can be put into the QBOX ONE (duolabs)? and how could I manage it?
2. the GL54 card (from S*K*Y*) could be use? in DM500S the GL39 was fried (the voltages are differents)
thx