Problem

[nadse]

hallo
 I have a problem with dreambox 500
When you want it Flasch over DreamUp is unable to make flasherase.
Whether through another program to make flasherase??
Always throw:

COM: The hardware detected a break condition.
14:32:01 box type: DM500


14:32:10.249 server: got discover packet, ip 0.0.0.0, baud 115200
14:32:10.259 server: ATTACHED box!, temporary, ip 0.0.0.0, baud 115200
14:32:10.369 Ping result: OK, box is alive and speaking to us ;-)

14:32:41.979 erasing complete flash (without bmon stage of course)...
14:33:12.520 server: retry  1
14:33:13.530 server: retry  2
14:33:14.540 server: retry  3
14:33:15.550 server: retry  4
14:33:16.520 ERROR, flash-erase failed, box will be unusable now!!

T H A N K S

[kevstar29]

are you using the right cable? i got mine from maplins

[nadse]

kabel is god



hallo
 dreambox 500 clone
 when I want to make DreamUp flash with erase this image DreamUp articles
9:04:11 Found no valid JFFS2 in image, flash-erase not supported


 Does anyone know what to do  THANKS

[Deda Pantelija]

try with erase image for dm500

[shishmish]

kabel is god



hallo
 dreambox 500 clone
 when I want to make DreamUp flash with erase this image DreamUp articles
9:04:11 Found no valid JFFS2 in image, flash-erase not supported


 Does anyone know what to do  THANKS

Install DreamUp for Dreambox 500 and read instructions for flashing the image.
 The cable should be properly secured with screws.

[nadse]

ne pomaze ništa,

only write   flash erase failed