SKYBOX S9 HD PVR/OPENBOX S9 HD PVR Firmware

[toxicoco]

replace.list for openbox S9 - Solves Sky DE and Canal+ FR HD issues

Click Menu ->
Network Local Settings ->
MGCamd Plug Settings ->
Update Files by USB-> replace.list [MGCamd Plug]

Now click either the OK or Green button to select
replace.list and place a check mark next to it, once the check mark or tick is visable
click the Yellow button to upload.

You can then if you wish, check to see if the replace list has been correctly added, by
clicking Manage Config Files and clicking on replace.list

If all went well, you will see the

following lines
X: {{ 1833 } { 1702 }}
X: {{ 1811 } { 0100 }}

Thanks a lot but it doesn't work on ccam :-( ...
I try with the 2 lines and with each one ... no HD issue :-( (before I try this some channels were working ... now nothing work :-( ... )

Somebody has a solution for french canal+ HD channels ?

Thx a lot

[djdon]

can i get sky uk and freesat @28.2e in jamaica on the openbox s9hd

[olgos762]

Decrypted channells can't be recorded. When I tray to play these recorded files the screen is black.. Why?
Fta channells can be recorded... playback is ok...
The last firmware has only CCcam 2.1.4 and not 2.2.1..

[djdon]

hi how can i get the OpenBox S9 HD PVR .dbs file for CW & 85W mux.

[wat3rb0y]

hi again guys, i updated my openbox,
cccam works better now,
but it needs another update to 2.2.1 version,
as it has freeze problems, with servers.

Do we now if is gona be fixed soon??

[waseem]

i updated my skybox hd but too much freezing showtime packages .i check all cc config files also.same server i put to other receiver working fine. connie_13 nova cinema hd just sound

[djdon]

how can i get OpenBoxS9.us Firmware 10122010

[antox]

OpenBox S9 Modified Dump.file with Channel List [03 December 2010]
This is a modified Dump file, and was released on [03 December 2010]

This dump file is based on the the latest official firmware release
[HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list [German HD Channels okay on Astra]
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access

[waseem]

Box not Booting Up
Ever since I loaded the latest firmware (16/11) I have had fairly regular problems of the box not booting up when I switch it on. What happens is that the front display ON light comes on but then goes out and we get no boot display. Have found that if I switch the box off and on at the back of the box about half a dozen times then eventually it boots up and everything is ok. Not sure if it is firmware related but I think it has only happened since I loaded the 16/11 (issued 24/11) firmware. Will probably revert back to the 8/11 firmware but thought I would post first to see if anyone else is having the same problem ? plz help

[sporting2006]

Does any one know how to get SLYuk card working inthis box for sharing as i have heard you need to put the boxkey and pin in the cccam config but i have no idea how to do it.

Any help would be greatly appreciated. (pozz)

[irfy]

how can i get OpenBoxS9.us Firmware 10122010

Here u go. For USA not Europe

[star6900]

Dose anyone know if the problem with Dre-Crypt has bean fixed?

[namara]

how can i get OpenBoxS9.us Firmware 10122010

Here u go. For USA not Europe

what new : HDS2_CM_america

[irfy]

No idea! I asked for the latest USA firmware. This is what got sent. Who ever has tried it pls report back check the info in menu for rel date.

[waseem]

Ever since I loaded the latest firmware (16/11) I have had fairly regular problems of the box not booting up when I switch it on. What happens is that the front display ON light comes on but then goes out and we get no boot display. Have found that if I switch the box off and on at the back of the box about half a dozen times then eventually it boots up and everything is ok. Not sure if it is firmware related but I think it has only happened since I loaded the 16/11 (issued 24/11) firmware. Will probably revert back to the 8/11 firmware but thought I would post first to see if anyone else is having the same problem ? plz help