SKYBOX S9 HD PVR/OPENBOX S9 HD PVR Firmware

[kyrosky]

The above software ( CONM_CHDS2_CMT_110509090D.abs) handles SoftCam.key only for cryptoworks.
Any solution please?

[psgpol]

hi
there is something wrong with this new firmawre CONM_CHDS2_CMT_110509090D.abs


my CCID is valid 085B but after 10 restarts i've got CLONE info.
please take a look at picture. under clone info there is VALID CCID 085B:



and my s9 is brand new original S9 not clone:


i can't back to firmware which was working before becasue this clone info displayed even on my backup DUMP. i used Erom upgrade tool with checked option "include bootloader" but same clone info.
what a stupid designers, killed my brand new s9

[leszek]

moze wgrasz pliki takie jak masz gdy na wyswietlaczu boot,, wgrywasz to kablem po RS232 ,wgrywaj pliki z bootloaderem,soft wgraj ten co miales lub wczesniejszy (z poczatku roku)

[zaher10]

Add "FTP function', you can upgrade your software and files by internet

from where in the menu i can use the FTP function?

[qbantt]

Hi,

Tell me something if I have CCID 0108 this is clone version? I flashed many times random firmware and I newer had issue with flashing and using tuner. It is possible?
Cheers,

[leszek]

Jeśli jeden z poniższych oryginalny:

00D0
00EA
085B
0D0C
98A1
98F2
9CF4
9D1A

[qbantt]

Czyli wyglÄ...da na to, że nie chodź to dziwne bo nigdy mi siÄ™ nie zablokowaÅ, po flashowaniu, czy mam siÄ™ wystrzegać nowszych firmware'ów? (mam z kwietnia)

[redha]

my  CCID is 0100 please advise

[leszek]

00D0
               00EA
               085B
CCID is 0100 ::0D0C
               98A1
               98F2
               9CF4
               9D1A

[dizna]

kako mogu prepoznati dali je moj s9 clone ili original?
platio sam ga nekih 79eura preko spanjoslke?

druga stvar,,
ima u njemu 2.1.4 i neznam koji je image u njemu!
ali sky de hd kanali i  hd+ kanali rade jako lose,,
iako imam sky de nagra na hop1 on mi otvara hd kanale na hop2 i preko $$$ kartica!
trza jako i nemoze se gledati!
sta da radim?
postoji li prio lista koja moze staviti da otvara prvo nagra karticu a ne $$$?





How can I tell whether my s9 clone or original?
 I paid him some 79eura over Spain?

 another thing,
 it has 2.1.4 and not knowing who img. in it!
 But de Sky HD channels and HD channels work very bad,
 Although I have ssky de nagra on hop1 He opens the HD channels on Hop2 over $$$ card!
 freeze and can not really be seen!
 What should I do?
 There is a prio list that can put that opens the first reward card and not the $$$?

[pumparica]

Ja mislim da je tvoj internet los i zbog toga ti kanali trzaju ili od onoga sto primas kanale  dijeli sa puno  ljudi i zato trza barem moje misljenje.

[sjony]

SKYBOX S9 HD PVR
SKYBOX S9 HD PVR receiver



General Specifications:
1) 300 MHz MIPS Processor - Linux Operating System
2) Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;
3) Fully compliant MPEG-2 MP@HL & MP@ML;
4) Fully compliant MPEG-1 Layer I & II & III, Dolby Digital Audio(AC3);
5) SCPC & MCPC receivable from C/Ku band satellites;
6) multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3(USALS) supported)
7) NIT search supported;
Support MHEG-5;
9) Support HDMI 1.3;
10) Support PVR(store in USB disk);
11) Multimedia files playback(by USB);
12) Support Electronic Program Guide(EPG) for 7 days;
13) Teletext and subtitle out through OSD;
14) Support multi-lingual DVB subtitle and teletext;
15) Automatic and manual channel scan options;
16) automatic service scan
17) channel-change time < 1 second
18) OSD in many languages and skin-support
19) Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable;
20) LED Display
21) Multiple display mode: 1080i/720p/570p/576i/480p;
22) MPEG-2 / H.264 Hardware decoding
23) Videotext Decoder
24) Analog audio output: stereo(L+R);
25) Digital audio output: S/PDIF by coaxial and optical;
26) S/PDIF Interface for digital bit stream out (AC-3)
27) YCbCr available;
28) 2 x Scart (RGB, FBAS or S-Video)
29) Screen format:auto, 4:3, and 16:9;
30) Upgrade software through USB2.0 port;
31) Powerful program management function, parent lock;
32) CA 1x slot and CI 1xslot
33) 10/100Mbit Ethernet Interface
34) directly bouquet-lists

Packing:
Gift box:32.5*31.5*8.5CM
1x User Manual
1X Skybox S9 HD PVR satellite receiver
1X Remote Control



MORE


DVB-S2
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75¦¸
LNB Power: Auto/14v/18v/OFF, Imax = 500mA
Video decoder
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output digital
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink
Video parameter
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart
Output: FBAS, RGB, S-Video
Serielle Interface RS 232
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet
10/100 MBit compatible interface
Function: Update of Firmware
USB
1 x USB 2.0 Host ,PVR
LNB power and polarisation per tuner
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
External PSU
Input:110-240V AC / 50-60Hz / 0,6A
Output: 12V = / 3,0A
Physical specification
Ambient Temperature +15 °C...+35 °C
Humidity < 80%
Size (W x D x H): 300 mm x 220 mm x 56 mm
Weight: 1,8 kg without HDD
Power
AC input range:100-240VAC 50/60Hz
PowerConsumption (Standby): Max. 10W (<1 W)



Latest firmware 8th Aug 2010

Get a usb pen drive format it fat32

load the HDS2_DUMP.abs onto it, place in the box at the back via the usb port.

Go into the menu and update the firmware via usb. This will give you the latest firmware

Channels are sorted into favourites and removed the tiresome channels that can cause us a bit of problem.

Iif you use your own channels some sky sports channels cause a reboot loop. The quickest way to fix is pull the sat wire out, reboot, change channel, then remove it from your fav's. PIck another sky sports channels as there are normally doubles of every sky sports channels.

where can I download this firmware, you also have a link to this firmware Multilingual support for openbox 9
PM me please.

[stpan]

Which Chanel editor can be used with HDS2-500HD？I tried many vision but none can function correctly when I tried to modified something.

[stpan]

Which Chanel editor can be used with HDS2-500HD？I tried many vision but none can function correctly when I tried to modified something.

[feetchip]

New Software for Openbox S9 HD
 

Based on last software, we  make some update and another version software is released today!

We improve the followings

1. support and read Thailand card

2. Support and read Malaysia card

3 supports internet tool( FTP tool)

4. When you want to identify your receiver, you need to enter "8888", not "777777"

Warm Suggestions:

Before identify , please backup your old software of the box by usb. Download , then upgrade the latest software by usb.
enter menu---tool---information(press ok)---press "8888" key, now you will see CHIP ID , If the box CHIP ID belongs to the chip_id_list, congratulatation!your HD Receiver is original version!  You can upgrade any new firmware and experience more new functions. Otherwise, if You Box is clone version , please upgrade the old version software!Because our latest software will kill the clone box when power and on over10 times. If less than 10 times, no kill for clone verion.

The chip_id_list is the following, we will keep them updated everyday:
00D0
00EA
085B
0D0C
98A1
98F2
9CF4
9D1A
When you buy a new box , try to view the chip_id_list on this http page.  If you can not find the  valid "CHIP ID" on the  chip_id_list, it means your box is a clone box.
DVB-UPLOAD v.1.6b

my skybox s9 CCID is 0100:98A1, not only 98A1; is original?