Coolstream HD-1 EMU Firmware

[antox]

Original Coolstream Image v1.84
Software Update Wizard - Agreement
Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk. #

In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------
Warning:
This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
15.07.2010

- Fix TS clock conversion[/b]


 
http://hotfile.com/dl/54994480/d8e9fa7/cs184.img.htm

[kargo.25]

Coolstream Image 1.85 vom 25.07.2010

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact [email protected] for any questions about our Software.
------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-------------------------------------------------------------------------
26.07.2010


- Enable Frontpanel Standby button to
reactivate STB from deep state
- Some fixes for video driver, where some
"freezes" reported
- Tuner driver fixes for 8psk

http://hotfile.com/dl/57480563/797ef11/cs185.rar.html

[labud]

 Coolstream Neutrino ~reloaded




Emu / Camd Auswahl geändert
FlexMenü / Tools verbessert

--> after loading/flashing....make spezialupdate1...into FLEx menu

Thx to TheDuke & Team




 20100725-1235-mtd2.zip

[antox]

CS_201007212130_KEYWELT_V1.3_Jul_rootfs.tar.gz
Coolstream-KEYWELT V1.3 July Image
CS_201007212130_KEYWELT_V1.3_Jul_rootfs.

CS_201007212130_KEYWELT_V1.3_Jul.img.tar.gz
Coolstream-KEYWELT V1.3 July Image
CS_201007212130_KEYWELT_V1.3_Jul.img

[aamir11]

original Coolstream Image 21.08.2010

Code Select Expand

- Fix radio channels recording
- Fix Infoviewer text display, add resolution icons
- Fix Neo delayed Shutdown, add LED Menu ON/OFF, menu fixes
- Fix bouquet name in epgplus; Fix bitrate for radio channels;
Show language settings before setup banner
- Fix Teletext in Fade mode
- Use video auto modes only if they enabled in neutrino;
Enable key repeat for number and string choosers menu item

cs186.zip

[kargo.25]

The image is based on the original image version 1.87 of 23:08:10.

Changes:

1-Image-style in the "holzfreaky" design
2-Flex-Meü own with some functions (blue button)
3-Emu menu (OSCAM, newcs & MgCamd selectable)
4-SVN neutrino state: 739
5-Advanced Infobar
6-Various plug-ins by RVK, theobald123, SnowHead, Paule Foul & Co
7-RSS feed support
8-THX for Crypticons and emu Boxcracker display from the image, but also times to look www.bxc.tv ...
9-wide channel logos by theduke
10-msgbox, input, getrc, shellexec by SnowHead
11-current Luj + + + Settings Astra Hotbird
12-other minor adjustments

You can flash the image as normal, via FTP or via a USB stick.



http://hotfile.com/dl/66821362/983831e/EmuMod_02.09.10_by_blackman_coolstream.to.zip.html

[antox]

EmuMod 06.09.10 by blackman

Update 06.09.2010

Neutrino SVN Stand: 753
Crypticons und Emu-Anzeige überarbeitet
Mgcamd-Einzelbetrieb läuft nun ohne Probleme
DEL-Plugin Update auf Version 1.1
neues Yweb: Version 2.8.0.6
diverse kleinere Ã,,nderungen
http://www.megaupload.com/?d=EIWBBTGC

[antox]

NG - Coolstreamimage C 0.5

Aktueller Stand (07.09.2010):

- SVN-Revision: 755
- NG-Infoviewer mit ECM-/CA-Info (optionale 3D Icons)
- NG-EMU Menü in Neutrino integriert (C++)
- mgcamd, newcs, oscam und gbox im Image
- NG-Image Info
- Grundlegende EMU-Configs vorhanden
- NetFS SERVER-Unterstützung
- Busybox 1.17.1
- fast alle Systembibliotheken und Tools in aktueller Version
- NG-Sendericons für Sat, KD, KabelBW, Primacom, UM
- NG-Dark Theme in Neutrino integriert
- NG-Startlogo
- Support für Eigene-Skripte via:
/var/tuxbox/config/flex/
/media/sda1/flex/
/media/sdb1/flex/
/media/srv/flex/

*TV-Guide (NG-CS-Edition by Sumisu)
*fritzcallmonitor NG-Edition
*links Webbrowser
*tuxcom
*tuxcal
*shellexec
*msgbox
*input
*getrc
*Werbeblocker
*Logomask
*Börse
*Wetter
*Tanken
*RSS-News
*Bundesliga
*Formel1
*cooliTSclimax

Danke an snowhead, Paule, bazi, Theobald und vor allem Sumisu für die Addons/Plugins.

Coolstream_NG_C05_Flash.rar
http://www.megaupload.com/?d=PD643Y92

[antox]

 NG-Return CS-Image Version 0.5 USB

- SVN-Revision: 755
- NG-Infoviewer mit ECM-/CA-Info (optionale 3D Icons)
- NG-EMU Menü in Neutrino integriert (C++)
- mgcamd, newcs, oscam und gbox im Image
- NG-Image Info
- Grundlegende EMU-Configs vorhanden
- NetFS SERVER-Unterstützung
- Busybox 1.17.1
- fast alle Systembibliotheken und Tools in aktueller Version
- NG-Sendericons für Sat, KD, KabelBW, Primacom, UM
- NG-Dark Theme in Neutrino integriert
- NG-Startlogo
- Support für Eigene-Skripte via:
/var/tuxbox/config/flex/
/media/sda1/flex/
/media/sdb1/flex/
/media/srv/flex/

*TV-Guide (NG-CS-Edition by Sumisu)
*fritzcallmonitor NG-Edition
*links Webbrowser
*tuxcom
*tuxcal
*shellexec
*msgbox
*input
*getrc
*Werbeblocker
*Logomask
*Börse
*Wetter
*Tanken
*RSS-News
*Bundesliga
*Formel1
*cooliTSclimax

Danke an snowhead, Paule, bazi, Theobald und vor allem Sumisu für die Addons/Plugins.

Coolstream_NG_C05_USB.tar
http://www.megaupload.com/?d=AB8UE4OL

[antox]

17.09.2010 original Coolstream Image

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
17.09.2010

- Fix Frontpanel driver
rework wakeup Function, make menu more
responsive to remote
NOTE (NEO): If you set a timer and shutdown STB
the LEDS will blink to remind you about it.
After recording done, STB will shutdown himself
if user dont cancel (messagebox will appear on
the screen)
- Fix reset STB from frontpanel buttons
You can do this using [MENU + Left] or [VF + UP]
- Dont stop playback in movieplayer when
a timer starts
- Dont freez OSD if CSTlink(CEC) used and
some Function not supported
- Add discrete codes for Logitech
- Fix some crash using icecast (internet radio)
- Update to yweb 2.8.0.7
http://www.megaupload.com/?d=HUY584RV

[labud]

BluePeer HD v1.1


•NEO tauglich
•EMU Management erweitert
•Infoviewer erweitert und angepasst
•Kernel update
•System Info
•BoxCracker Design für yWeb Version 2.8.0.8
•Unterstützung für MgCamd, Gbox, Newcs und Oscam
•Online Imageupdate möglich
•Sat und Kabel tauglich
•bXc Bootlogo (Neo only)
•BoxCracker typisch jede Menge Platz
•EMUS und KEYS sind aus Respekt an die Entwickler nicht im Image enthalten


Download

[antox]

Coolstream Originalimage verfügbar 1.89

02.10.10
Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!

- Fix "Black Screen" Problem on Timeshift
- Fix Fastscan crash
- Fix some minor bugs in drivers
- Add under "Settings"->"Manage settings"
Factory reset menu so you can clean the flash
if needed.
- Init drivers in 1080i Mode
- Fix some minor OSD bugs
- You can install from now some ready Channel Settings
using Internet Update menu.
http://www.megaupload.com/?d=429BP08U

[antox]

11.10.2010 neues original Coolstream Image online 1.90

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
----------------------------------------------------------------------------------

Warning:
This File will renew the Software and you will lose the old Settings,
to keep old Setting please use Partial Updates in the Software List
if available(simple_update.txt Section).You must have version 1.90 or
higher already installed.
This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
11.10.2010

Critical Update
- Bugfixes for Video driver
- Enable vbi driver



Nach dem Update auf 1.90 soll man 3 Sektionen im Updatemodus verfügbar haben:

1. Basis Image
2. Channel Lists
3. Addon Update
http://www.megaupload.com/?d=K6Y3OWZA

[kargo.25]

The anox 0.3b
anox 0.3b

Podstawa: oryginalny firmware 1.90 z 11.10.2010
Neutrino: SVN rev 839 + moje modyfikacje
Y-Web: 2.8.0.8

Zmiany:
-poprawiony drobny błąd w menu zarządzania emulatorami
-dodane opcje automatycznego wyłączania emulatora/serwera w trybie gotowośc
-dodane pokazywanie adresu serwera CW na belce informacyjnej (domyślnie wyłączone)
-dodana opcja Img2USB (funkcje zaawansowane)

Base: original firmware 1.90 (11.10.2010)
Neutrino: SVN rev 839 + my modifications
Y-Web: 2.8.0.8

Changes:
-fixed small issue in emu management menu
-added options to automatically disable softcam/cardserver in standby
-added display of CW server address on the infobar (disabled by default)
-added Img2USB option (expert functions)


http://www.megaupload.com/"]anox-0.3b-flash[/URL]

http://www.megaupload.com/?d=HYXS5AAB"]anox-0.3b-usb[/URL]

[kargo.25]

The anox 0.3b
anox 0.3b

Podstawa: oryginalny firmware 1.90 z 11.10.2010
Neutrino: SVN rev 839 + moje modyfikacje
Y-Web: 2.8.0.8

Zmiany:
-poprawiony drobny błąd w menu zarządzania emulatorami
-dodane opcje automatycznego wyłączania emulatora/serwera w trybie gotowośc
-dodane pokazywanie adresu serwera CW na belce informacyjnej (domyślnie wyłączone)
-dodana opcja Img2USB (funkcje zaawansowane)

Base: original firmware 1.90 (11.10.2010)
Neutrino: SVN rev 839 + my modifications
Y-Web: 2.8.0.8

Changes:
-fixed small issue in emu management menu
-added options to automatically disable softcam/cardserver in standby
-added display of CW server address on the infobar (disabled by default)
-added Img2USB option (expert functions)


http://www.megaupload.com/"]anox-0.3b-flash[/URL]

http://www.megaupload.com/?d=HYXS5AAB"]anox-0.3b-usb[/URL]