Software Ariva TT HD PVR

[antox]

Neue org.Firmware ArivaTTPVR_1088A.785
ArivaTTPVR_1088A.785.zip
Neue Emusoft Ferguson ArivaTTPVR-11.08.9F
ArivaTTPVR-11.08.9F.zip

[antox]

Ariva_TT_1.09.0A.zip
Soft_Ariva_TT_1.09.0A_producentap


Description:

* Fixed bug with the version numbering channels 1.08.8A
* Further improved the rate of change of channels
* Improved integration with the HD channels Polsat Module
Ariva_TT_1.09.0A.zip.html

[antox]

Neue Emusoft Ferguson ARIVA TT HD_11.08.5D/Hivion

       SSSP â€" Simple Serial Sharing Protocol
=====================================

Code Select Expand

This Protocol defines the communication between a DVB Box and a gbox by using a RS232(serial/com/tty port) with only 4 commands to implement.


RS232 communication settings
============================
115200 8N1 (115200 Baud, 8 data bits, no parity, 1 stop bit)
To activate add in the gbox_cfg R: { 01 } for com1, or R: { 02 } for com2
W: and V: should be deactivated 00 00
When developing Software you can activate thers232 debug messages by adding
10 to the R: parameter, a example for com1 would be R: { 11 }


Format of data
==============
AB CD EF GH ....

AB = Command
CDEF = length of the data following
GH ... = data

Total length is CDEF + 3 (1 byte command + 2 bytes len)


Command 0x means from STB to gbox
Command Fx means from gbox to STB


SEND PMT = 01 (send PMT to gbox)
--------------------------------
01 xx xx yy yy zz zz zz zz data ....
xx = Len
yy = SID ( byte 2 and bytes 3 from the PMT)
zz = PMT CRC32 (last 4 bytes in the PMT)
Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
Provider is only used in Seca and Viaccess, in other systems put 00 00 00
For Seca use 00 xx yy and for **acess xx yy z0

On each channel change the DVB box must send the PMT first, on FTA Channels please send: 01 00 06 yy yy zz zz zz zz


SEND ECM = 03 (send ECM to gbox)
--------------------------------
03 xx xx yy yy ecm_data ....
xx = len
yy = pid

Note: Please send every ecm only once, do not send the same ecm multiple times.


REQUESTING PIDS DATA = F1 (receive ECM pid list )
-------------------------------------------------
F1 xx xx pid1 pid2 pid3 ....
xx = Len
pidx = 2 bytes for each pid

Please send me ECM data from these pids only, close all other already open.


CW RETURN = F2 (receive ControlWords)
-------------------------------------
F2 00 10 cw1 (8 bytes) cw2 (8 bytes)


Command flow on a channel change
================================
1. DVB box sends PMT with command 01 on a channel change
2. gbox sends pid list of the ecm's it can handle with command F1
3. DVB box sends ECM's (from all pids in the pid list) with command 03
4. gbox sends CW's with command F2
5. As soon the gbox has success in decoding a ecm it sends again a F1 command
with one pid only, the DVB box should close then all other pids and from
now on send only ecm data from that pid.

After this command 03 and F2 will be repeated until a channel change.

On the next channel change the DVB should close all open pids and repeat the
above procedure.


[antox]

Neue Emusoft Ferguson Ariva TT_Hivion_11.09.1D_27.05.2010

[antox]

Neue Emusoft Ferguson Ariva_TT_11.09.3F


       - Cccam dla C+ i polsatu,
- 19.2 CanalSAT
- 13.0 Bis Channel
- procesor pozwala tylko na 3 serwery
- numer providera dla CP
- autoreconect
- problem CAID w multicrypcie
http://hotfile.com/dl/50830591/8789340/Ariva_TT_11.09.3F.zip.html

[antox]

Neue org.Firmware Ferguson Ariva_TTPVR_1093A.849

Vergrösserte Miniaturansicht anzeigen
Prior to the commencement of programming should be ¿s zaarchiwizowaæ
³ ¹ in his own list of channels and restore the factory settings tuner.

Then the wizard settings menu, select only the language - Polish and hit exit.

Push the menu button and menu by - communication - transfer USB amy new transmission ³
Software tuner (USB>> FERGUSON). After reboot, the tuner in the same
way we bring in his own ³ ¹ s list of channels (or transmit to a receiver ³ amy Factory ¹ downloads list of web pages).

Then adjust the antenna in accordance with its existing installation ¹ ¹ ¹ antenna.

Should keep in mind that that in exercise of the option przyapdku's dual converter '
¿y must configure ports DiSEqC separately of the head A and B of the head,
after configuring the heads of both voice can be carried Switch the operation mode
'Double converter'.


WARNING!

Je ¿If after attempting to exchange the software using a USB tuner does not start, then you should ¿y
benefit with the possibility programwawnia own computer using a PC.
Need a computer with MS Windows XP, your computer must posiadaæ
physical port 232 (as output in the p ³ plates shit, PCI or PCMCIA card)
you need a null-modem cable ('crosses').

On the part of ferguson.pl please download prgam ³ ¹ upload to your receiver for the 8800 (HD-upgrade) and
programming instructions in a pdf file.

¹ Follow the instructions from the pdf file please wgraæ oprogramwoania for the TT PVR tuner.

When finished, check whether the tuner reacts to the stand-by button and switch on the ³ it
Only when such a reaction following ¹ pi.
Too early to disconnection from the power receiver can cause serious damage to it!

[antox]

Neue org.Firmware Ferguson Ariva_TTPVR_1.10.0A.851

Code Select Expand

Software version 1.10.0A contains, inter alia, your new version of the database.
If you use your own list of channels carried on the old
'Blue' version of the software, in some cases can wystapiæ
Compatibility problems with ¹ lists.
We recommend the new wykoananie a self a list of factory-based channels

[antox]

Neue Emusoft Ferguson Ariva TT-Hivion-11.10.2D_12.07.2010

http://www.2shared.com/file/WKcXCfox/Ariva_TT-Hivion-11102D_1207201.html

[antox]

Neue Emusoft Ferguson Ariva TT HD_Hivion_11.10.3D_26.07.2010

[antox]

Neue Emusoft Ferguson ARIVA TT HD_Hivion_11.10.4D
       * 13.08.2010

Code Select Expand

1. Nxgxavxsxon’s smartcard workable

# it is example key
# IRDKEY: 01234567
# BOXKEY: FEDCBA9876543210
# RSAKEY:
0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF01 23456789ABCDEF012345678
9ABCDEF0123456789ABCDEF0123456789ABCDEF0123456789A BCDEF

# for provider id is FFFF
# for ird number key index is 00, 8 texts
# for boxkey index is 01, 16 texts
# for raskey index is 02, 128 texts
# you have to download it using dreamloader

N FFFF 00 0123456700000000 ;ird number
N FFFF 01 FEDCBA9876543210 ;boxkey
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key
N FFFF 02 0123456789ABCDEF ;rsa key

[antox]

Ariva TTPVR 1122A

[antox]

Neue org.Firmware Ferguson Ariva_TT_1.13.1A

because of restrictions lists favorite channels to 100 items
channels were available through the Cyfrowy Polsat digit + will switch can be found
Favourite group called C + & Polsat.

[antox]

Neue Emusoft Ferguson Ariva TT HD PVR-11.14.1F

wersja z emu i sharingiem

- poprawki cccam
- multiserver
- autoreconnect
- dodane menu status sieci

   Neue org.Firmware Ferguson Ariva_TT_1.14.1A

[antox]

Neue org.Firmware Ferguson Ariva_TT_1.14.2A
       * poprawiono obsługę kart w czytniku dla nowego CAID Cyfry+
* i inne drobne poprawki...

[antox]

Neue org.Firmware Ferguson Ariva_TT_1.13.1A

because of restrictions lists favorite channels to 100 items
channels were available through the Cyfrowy Polsat digit + will switch can be found
Favourite group called C + & Polsat.