Settings C: line and F line..

[antox]

Syntax : C: { caid:id:uphops, caid:id:uphops, ... }

In a cline we can have :

  * Instructions where to look for a server
  * Which port that server is using
  * Username to connect to that server
  * Password to connect to that server
  * If you like to recieve Emulator shares from keys (only if set to 1 if set to give emus on the f line from the server you are getting )
  * Limiting what to get from that particular server { caid:id:uphops, caid:id:uphops, ... }

Examples

A basic C line that most users will use :
C: server.noip.com 12000 username password

A C line that is more appropriate if you do not want to recieve key Emulators:
C: server.noip.com 12000 username password no

A C line that is more appropriate if you want to recieve key Emulators (Not highly recommended) :
C: server.noip.com 12000 username password yes

A Cline that will limit to receive all shares that are only up to 2 hops away (Recommended):
C: server.noip.com 12000 username password no { 0:0:2 }

A Cline that will get all shares but does not get a specific provider:
C: server.noip.com 12000 username password no { 0:0:2, 093b:0 }

A Cline that will get all shares but does not get specific providers:
C: server.noip.com 12000 username password no { 0:0:2, 100:3, 100:4, 100:5, 100:9, 100:A, 100:c }

[antox]

 Default What other setings i can put in F: line ?
Syntax :
F: ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) < hostname/ip address>

In an F line we must have (mandatory) :

  * Username that your friend will use to connect to you server
  * Password that your friend will use to connect to your server

Optional

  * How much your friend is allowed to re-share your shares
  * Let your friend use your emu key files
  * Allow your friend to send you emm's to update your local card trough network
  * What your friend will get from you and gives only number of hops away from you { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... }
  * What time is your friend allowed to get shares from you { begintime-endtime, ... }
  * From which ip/dns your friend can connect to your server


Defaults if you leave the optional fields out

  * = 5
  * = 1 (yes)
  * =1 (yes)
  * { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } = No limits ( will get all the shares from you )
  * { begintime-endtime, ... } = No time limit (24hrs ON)
  * = can connect from any IP/DNS

Notes

  * length max 20 characters
  * length unlimited
  * if set to 1 (yes) your friend will get you key emu but he can not re-share it


Examples:

F: username password

Basic F line with nothing else specified so all the default values will be set automatically

F: username password

Typical F line,

F: username password 2 1 1 { 0:0:1 }

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * He will get any share available on your server and he is not allowed to give any of them to anybody

Typical F line if your friend has a linux server,

F: username password 2 1 1 { 0:0:2 }

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * He will get any share available on your server and he is allowed to re-share them but his friend is not allowed to share them again

Another typical F Line

F: username password 2 1 1 { 0:0:3 }

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * He will get any share available on your server and he is allowed to re-share them, his friend is also allowed to sahre them once again

Advanced F line

F: username password 2 1 1 { 0:0:3, 093b:0:1 }

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * He will get any share available on your server and he is allowed to re-share them, his friend is also allowed to share them once again
  * He will get provider 093b for him self only and he is not allowed to re share it

Advanced F line

F: username password 2 1 1 { 0:0:3, 093b:0:1 } { 0100:000080:15df }

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * He will get any share available on your server and he is allowed to re-share them, his friend is also allowed to share them once again
  * He will get provider 093b for him self only and he is not allowed to re share it
  * He is also not allowed to view or share channel 0100:000080:15df

Time limited F line

F: username password 2 1 1 { } { } { 12:00-17:00, 19:00-20:00 }

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * Your Friend will get shares from you only between 12:00-17:00 and 19:00-20:00

Note you can add share limits as described earlier as well

An F line that can connect from a specific IP/DNS only

F: username password 2 1 1 { } { } { } friend_dns.noip.com

  * Your friend will get all the shares from you that are up to 2 hops away from you
  * He will be allowed to use your emu keys
  * He is allowed to send emm's
  * Your Friend can only connect from the specified dns


Note you can add share & time limits as described earlier as well

[Prioryman]

That has got to be one of the best reads to date, thank you very much.

Regards John

[soos]

That has got to be one of the best reads to date, thank you very much.

Regards John

my first post and i agree 100%

[mircking]

Yes 1 of the best posts so far about c/f lines... (pozz)

1 question if you have 1 box set up as server with cccam and cs installed... on the second box do you have to install cs as well in order for the c line to work? or do you just need cccam installed?

this is for the white card (UK)

Many thanks

[boshkarin]

second box is in your house or somewhere else?
anyway second box have to be on the net and has to have CCcam instaled, if you are only a client you dont need to have open port for cs if the second box is server than you have to open new port for that box........

[mircking]

the 2nd box is for my friend, so i just install image and cccam, and put the c line in and reboot? will that work for him

[boshkarin]

yes.....

[mircking]

I must be doing something rong because when i test it in my own house i cant view no pay channels and cccam doesnt load up on the screen when you change channels like it does on the server box 1

and i have set my no-ip as this on the server box

Alias : username.no-ip.info
Domain : no-ip.com

are them 2 values right?

[makhmal]

Hi All,
Hope I won't sound silly.
Apparently it has been easy for most of you to follow these instructions, yet I’m a real beginner, and don’t understand some of the terms used here and don’t know where to find them. Would you help please?
Just bought my VU+ solo, installed vti image, connected the box to internet and downloaded Cccam1.2.4, didn’t do anything about IP or whatsoever, now I don’t know what else I need to do to be able to use some of the free Cccam servers being posted here!
I’m desperate for help!
 connie_13

[makhmal]

Hi All,
Hope I won't sound silly.
Apparently it has been easy for most of you to follow these instructions, yet I’m a real beginner, and don’t understand some of the terms used here and don’t know where to find them. Would you help please?
Just bought my VU+ solo, installed vti image, connected the box to internet and downloaded Cccam1.2.4, didn’t do anything about IP or whatsoever, now I don’t know what else I need to do to be able to use some of the free Cccam servers being posted here!
I’m desperate for help!
 connie_13

[makhmal]

Hi All,
Hope I won't sound silly.
Apparently it has been easy for most of you to follow these instructions, yet I’m a real beginner, and don’t understand some of the terms used here and don’t know where to find them. Would you help please?
Just bought my VU+ solo, installed vti image, connected the box to internet and downloaded Cccam1.2.4, didn’t do anything about IP or whatsoever, now I don’t know what else I need to do to be able to use some of the free Cccam servers being posted here!
I’m desperate for help!
 connie_13