Latest Version of AltDVB

[kargo.25]

AltDVB v2.2 BDA device

This is a new BDA interface wrapper for AltDVB v2.2.

The configuration file (Dev_Bda2Driver.cfg) should be placed in the same folder
as the interface (Dev_Bda2Driver.int). If this file doesn't exist, the interface driver
will create a new one with default values.

DVB-S2 signalling:
TechnoTrend users - no change neccessary (DVBS2Signalling signalling value is the default 8VSB)
KNC One users - change the DVBS2Signalling signalling value to: 8PSK
Hauppauge users - change the DVBS2Signalling signalling value to: NBC_8PSK
all other - try 8VSB or 8PSK

S/S2 Pilot and S2 Roll Off:
these values are for the Haupppauge drivers and practically should not be changed

v 0.1.0.12 -
- recompiled with latest Technotrend BDA SDK (1.0.1.21). Now use ttBdaDrvApi_Dll.dll

[antox]

AltDVB v2.2 BDA device v 0.2.0.1


- Removed DVBS2Signalling, DiSEqC, S_ROLLOFF settings from config.
- Added FEC support.
- LNB power-off support.
- Vendor-specific BDA extension autodetection. Now supported:
* Technotrend BDA API (use ttBdaDrvApi_Dll.dll). ToneBurst + Raw DiSEqC, LNB power-off, Modulation type selection.
* Hauppauge BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings.
* Conexant BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings (optional), LNB power-off (optional).
* DvbWorld BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.
* Turbosight BDA extension. Raw DiSEqC, Modulation type selection, LNB power-off.
* Twinhan BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection, LNB power-off.
* TeVii BDA API (TeVii.dll). Raw DiSEqC, LNB power-off, Modulation type selection.
* Omicom BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.

[kargo.25]

AltDVB v2.2 BDA device v.0.2.0.2

Code Select Expand

- Change BDA type detection order. Use Turbosight, DVBWorld
  extension for TeVii devices with old drivers (pre 2009).
- Show Technotrend product name instead tuner filter name.
- Change credits and added project url in device selection dialog.

P.S. v 0.1.0.12 and later not need any MSVC runtime.
+ Please update topic name (update or remove version).



[kargo.25]

AltDVB v2.2 BDA device v.0.2.0.3

This is a new BDA interface wrapper for AltDVB v2.2.

!!! ttBdaDrvApi_Dll.dll, TeVii.dll must be placed in directory with AltDVB.exe !!!

The configuration file (Dev_Bda2Driver.cfg) should be placed in the same folder
as the interface (Dev_Bda2Driver.int). If this file doesn't exist, the interface driver
will create a new one with default values.

S2 Pilot and S2 Roll Off:
these values are for the Haupppauge drivers and practically should not be changed

v 0.2.0.3 - 2010.07.18

- DVB-S tuning code cleanup.

[kargo.25]

Date: 25-07-2010
----------
v 0.2.0.4
- Initial DVB-S tuning fixed (power-on, power-off).

[labud]

01.08.2010


v 0.2.0.5 - 2010.08.01

----------
v 0.2.0.5 - 2010.08.01
- Experimental Microsoft Windows7 DiSEqC BDA-extension support. Used in Windows7 Media Center (DiSEqC 1.0), if driver provide this extension.
Most Win7-designed BDA-drivers provide this extension only for DiSEqC 1.0, but specification support RAW DiseqC 1.x/2.x and ToneBurst.
Current build support only ToneBurst/DiSEqC 1.0 for this extension (but in sources implemented also RAW DiseqC support).
- New configuration file option BDA_TYPE - preffered BDA-extension (Microsoft or TeVii). BDA extension always autodetected and this option can change priority.

[josagi]

v 0.2.0.6 - 2010.09.04 - CrazyCat

- Initial DVB-S tuning again fixed (power-on).

[josagi]

Date: 03-10-2010
----------
v 0.2.0.7

- Initial DVB-S tuning speed-up.

[josagi]

v 0.2.0.8
2010.10.09
- Revert 0.2.0.7 changes (LNB power-on failed for some devices).
- Omicom S2 DiSEqC 1.x minor fix (enable continous 22Khz (50ms) before DiSEqC command).
- Turbosight QBOX, QBOX2, QBOX-S2 and Prof 1100 support (DiSEqC 1.x, LNB power control).