Update UFR910rev0.998 im Anhang
Changelog:
CRC32 Überprüfung eingefügt
Hinweise im Howto ergänzt
Howto:
UltimateFlashRecovery 910 rev 0.998 by SoLaLa
wie ich schon sagte wollte ich nen paar Schönheitskorrekturen machen und bin dabei noch über die Frage der MACadresse gestolpert... da ich das ganze in dieser Version (noch) als reines Notfallimage sehe wird schlichtweg die Box mit einer Standard MACadresse ethaddr=00:50:fd:ff:12:34 versehen (ich denke aber drüber nach, ob man je nach Zustand der Bootargs die MAC und IPadressen retten und nach dem Flashen wieder einfügen kann, also vom Programm automatisiert ohne weiteres zutun des Users)
Für den Augenblick muß die entsprechend zur Box gehörende MAC noch manuell wieder korrekt gesetzt werden... wenns denn sein muß.
Was macht das Paket?
1. Es wird die komplette absolut cleane 2.0beta/final von Kathrein geflasht
2. Es wird ein absolut cleanes btcf geflasht (wer btcf nicht kennen sollte: das ist der bootconfigsektor)
3. Die bootconfig hat die korrekten bootargs für 2.0beta und die ethaddr 00:50:fd:ff:12:34
Vorraussetzungen zur Anwendung:
UFS910 ( ja nee... is klar ne? )
PC mit Hyperterminal oder ähnlichem Programm (binary kermit muß unterstützt werden)
Nullmodemkabel zwischen PC und UFS910
USBstick, fat32 formatiert, mit Ordnerstruktur /kathrein/ufs910
Vorgehensweise:
1. ufr910.zip downloaden und entpacken
2. die Datei ufr910.img auf den USBstick kopieren in den Ordner /kathrein/ufs910
3. die Datei ufr910.exe irgendwo auf dem PC ablegen wo man sie später auch wiederfindet
3. Hyperterminal starten, Verbindung über COMx mit "115200, 8, n, 1, kein" herstellen
(diese Einstellungen und Bedienung von HT sind massenweise dokumentiert, weshalb ich hier nicht näher darauf eingehe)
4. USBstick an die box stöpseln, mit Netzschalter einschalten und im Hyperterminal den
Bootvorgang SOFORT durch betätigen der <enter>-Taste abbrechen.
Im Hyperterminal bleibt die Box mit dem Prompt STB7100ref> stehen.
5. Folgenden Befehl gefolgt von der <enter>Taste im Hyperterminal eingeben:
loadb a4000000; bootm a4000000
(falls man sich hier vertippt: man kann nix kaputt machen mit evt. falsch eingegeben Zahlen)
6. im Hyperterminal erscheint die Meldung "ready for binary download...."
7. Im Hyperterminal in der Menuleiste auf
-"Übertragen" klicken,
-"Datei senden" auswählen,
- im Popupfenster die Datei ufr910.exe wählen (wo war die doch gleich...???)
- und ganz wichtig: beim Protokoll "Kermit" auswählen und dann auf den <senden>-Button klicken
8. noch ca. 3 1/2 min warten und nix tun bis Bild wieder da ist (mit "Erstinstallation")
Während dieser Zeit erscheinen im Display und im Terminal die entsprechenden Fortschrittsmeldungen
9. Am Ende des Vorgangs werden im Hyperterminal 3 checksummen ausgegeben
Alle 3 Checksummen MÜSSEN identisch sein. Falls sie es nicht sind, bzw. die Box nicht sauber starten sollte,
dann bitte den gesamten Vorgang wiederholen, im Hyperterminal komplett mitloggen und im Forum posten.
Hinweise:
Dieses Paket funktioniert IMMER, wenn zumindest uboot und die serielle Schnittstelle der Box noch heil sind.
MACadresse, IPadresse, zerschossene oder gar völlig gelöschte Bootargs, Firescanner und Virenwalls und all die anderen Problemchen
sind irrelevant und haben keinen Einfluß auf die Funktion.
Bei der Verwendung von Hyperterminal oder TTerm unter Windows Vista kann es zu Fehlfunktionen bei der Übertragung der ufr910.exe kommen.
Nach der Kermit-Übertragung erscheint dann eine Meldung "bad Magic..." im Terminal (Danke Einstein fürs Fehler haben :-) )
Einzige Unbekannte: der USBstick. Wie auch bei allen anderen Stickanwendungen im Zusammenhang mit dem UFS910 MUß nicht jeder Stick funktionieren.
Für diesen Fall erscheint im HT nach der Übertragung des ufr910.exe eine Meldung <INTERRUPT> und der UFS910 startet unverzüglich neu.
Falls der USBstick zwar erkannt, aber nicht richtig gelesen werden kann, erscheinen im Terminal Meldungen dieser Art:
ERROR: sohci_submit_job: ENOMEM
ERROR: sohci_submit_job failed
In diesem Fall bitte einen (nach Möglichkeit älteren, kleineren) USBstick verwenden, der ganz sicher USB1.1 kompatibel ist
Zukünftige Erweiterungen bis zur rev 1.0:
Wiederherstellung MAC-/IPadressen falls noch vorhanden, weitere Notfallimages (1.06, 1.04...),
andere Flashpakete: e2 images, images mit mini-uboot oder 2nd bootloader
(die dann auch einfach direkt geflasht werden können ohne Umweg über 3 andere Images),
VOLLBACKUPS flashen (also komplette images incl. Bootargs und mini)
Dieses HowTo verlege ich in der endgültigen Fassung natürlich noch mit in das Paket.
UltimateFlashRecoveryUFS910rev0
I build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711.
Only we made a few more options.
- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image
When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.
Here are the copy options:
Copy channels:
/usr/local/share/enigma2/bouquets*
/usr/local/share/enigma2/userbouquet.*
/usr/local/share/enigma2/lamedb
/usr/local/share/enigma2/satellites.xml
/etc/tuxbox/satellites.xml
Copy Settings:
/usr/local/share/enigma2/settings
Copy Picons:
/usr/local/share/enigma2/picon (complete dir)
Copy mount:
/usr/automount/amount.ini
/etc/auto.misc
/usr/local/share/enigma2/automounts.xml
Copy Var:
/var/emu/*.*
/var/etc/*.*
/var/etc/autostart/start-config
/var/keys (complete dir)
Copy BlueKey action:
/var/.blueKey or /var/etc/blueKey (depending on copy from )
Copy Plugins:
/usr/lib/enigma2/python/Plugins/Extensions/ + selected plugin ( if selected )
Copy bootp.conf:
/var/baroot/ba/ba/{imagename}/bootp.conf
/var/baroot/ba/ba/{imagename}/bootp2.c
Danke an Black_64 für dieses Tool und das gute HowTo von joergurmel,
sowie den AAF-Betatestern.
FÜR WINDOOF -USER NUR FLASHABLE MIT DER FLASHSUITE 1.2.8
FÜR NFS/USB USER IS DER KERNEL SEP. DABEI UM DAMIT DANN JEDES X-BELIEBIGE E2 VON NFS/USB BOOTEN ZU LASSEN UM VON DORT AUS DANN EVO-MINI-1472 ZU CATTEN/DD (BEISPIEL: dd if=/tmp/EVO-MINI1472.img of=/dev/mtdblock6)!!!
WAS IST EVO-MINI:
DARIN IST DES SOGENANNTE MINIUBOOT VON "SOLALA" (FETTES THX NOCHMAL) ENTHALTEN!
DAMIT IST ES MÖGLICH VIA RC ON BOOT SEIN IMG AUSZUWÄHLEN WAS STARTEN SOLL, EGAL OB FLASH, USB ODER NFS!
DAZU MUSS MAN NUR DIE BOOTARGS IN DER FLASHUITE IM 3P1MINI.TXT ANPASSEN.
ES SIND EINTRÄGE VON 0-9 MÖGLICH! (SIEHE ENTSPR. TXT FILE)
DARIN MUSS VOR BOOTARGSÜBERTRAG UND NUR GANZ OBEN EURE IP,GW,SERVERIP,NETMASK
VON EUCH ANGEPASST WERDEN, SCHON KANN MAN FLASHEN UND DIE ARGS ÜBERTRAGEN, UND ES BOOTET DANACH AUCH DIREKT AUS FLASH SOFERN MAN JICH VIA RC WAS ANDERES WÄHLT!!! FÜR BOOTARGS-ERWEITERUNGEN ENTWEDER IM EVO-IMG FW_SETENV NUTZEN ODER HALT DES TXT ABÄNDERN UND NOCHMALS ÜBERTRAGEN.
OBIS ANLEITUNG FÜR DIVERSE MÖGLICHKEITEN FINDET MAN UNTER "ANLEITUNGEN" HIER IM BOARD!
-576i bugfixxed! (geht nun auch u.a bei samsung, wizzard wieder sofort sichtbar!)
-networkbrowser plugin intergiert (fettes thx to "nit" der nun ne umsetzung mitentwickelt hat wo nfs+cifs gescannt werden können!)
was nun alle arten von share-mounts handhabt, entweder rot-rot, rot-grün oder im netzwerkmenu zu finden!
-extensions wurden entfernt auf 2mal rot!
- HD recording zu nfs ok!
neue struktur und aufbau !
var/etc wird on boot nach /etc eingebunden. alles is somit rw darin und kann bearbeitet werden!
usr/lib/enigma2/python wurde ins var verlegt!
usr+var sind rw also beliebig editierbar!
usr is nich komplett rw sondern /usr/lib/eniga2/python was alles wichtige enthält was man evtl ma ändern oder ergänzen möchte! bei allem gilt jedoch wie immer:
nich zu voll pappen sonst könnte es platzen und dadruch nicht mehr booten. immer mit df-h nachsehen wieviel platz noch frei ist und immer ein polster von mind 150kb free belassen (muss e2 haben!!!).
fixxes:
-platzer sind nun schwer möglich da nun nach /hdd /swap eingebunden wird und das bei fehlender/defekter hdd/stick nur readonly ist und somit nicht beschreibbar!
-bootzeit um ca 10sek verkürzt (thx nit)
avibugfix included now! (thx nit)
-neuer eth treiber vor allem cifs optimiert!!! (thx nit)
-hdtv-nfs-recording on vox+kabel1 ok!!!
tdt-changes:
-1080p 25+30hz gehen nun (genial geiles bild!!!) ruckelfrei!!!!
2x grün kann man a/v direkt umstellen
-weitere kleinere fixxes.....
known bugs:
TS via nfs-sharing auf vox+kabel1 ok, restliche sd-tv-sender und bei hdtv aussetzer/ruckler/hänger!
für swapfile einfach auf usb-stick/hdd einen folder namens: swap anlegen, auf swapfile stellen, off on, fertig. telnet: free sollte nun bei swap keine 0 mehr zeigen! alternativ swappart benutzen (empfohlen!!!)
für epg saving auf stick/hdd dort einen folder: epg anlegen und auf usb/hdd epg save im setup stellen!
für record, ts usw wie gehabt folder auf der media-partition(sda5) anlegen:
mp3
record
pictures
timeshift
own_movies
epg
swap
....
nähere infos dazu gibt einem die var/etc/automount.ini
vielen vielen dank an TDT fürs basis image
ein fettes thx an obiwan, nit ,max für die unterstützung zur verwirklichung des flashimages und des testens!
Thanks pinky1981
3p1 FLASH FLASH IMAGE SUITE 1472-MINI FOR UFS-910!
FOR Windoze flashable USER ONLY WITH THE FLASH SUITE 1.2.8
FOR NFS / USB USER IS THE KERNEL SEP. THERE BE ANY ORDER X-E2 OF ANY NFS / USB BOATS TO BE IN ORDER TO BE THERE FOR EVO-MINI-1472 TO Catts / DD (Example: dd if = / tmp/EVO-MINI1472.img of = / dev/mtdblock6 )!
WHAT IS EVO-MINI:
THEREIN IS THE SO-CALLED BY MINIUBOOT "solala (FAT THX AGAIN) INCLUDED!
SO IT IS POSSIBLE VIA RC BOAT ON HIS IMG CHOOSE WHAT IS STARTING TO, WHETHER FLASH, USB OR NFS!
THIS SHOULD BE MADE ONLY IN THE bootargs FLASHUITE IN 3P1MINI.TXT Customize.
THERE ARE POSSIBLE ENTRIES FROM 0-9! (GO TO CONFORM. TXT FILE)
THEREIN BEFORE BOOTARGSÜBERTRAG AND ONLY VERY UP YOUR IP, GW, ServerIP, NETMASK
ADAPTED FROM YOU ARE ALREADY CAN Flash and ARGS TRANSFERRED, AND EVEN THEN it boots DIRECTLY FROM WHERE TO FLASH VIA JICH RC CHOOSES WHAT ELSE! Bootargs EXTENSIONS FOR EITHER THE EVO IMG FW_SETENV STOP THE USE OR TXT MODIFY AND AGAIN TRANSFERRED.
OBIS INSTRUCTIONS FOR VARIOUS WAYS TO FIND UNDER "INSTRUCTIONS" HERE AT THE BOARD!
-576i bugfixxed! (now also including at samsung, wizzard again immediately!)
nit-intergiert network browser plugin (thx to fat, "" ne now the implementation has helped to develop can be scanned when cifs nfs +!)
What now all types of share-mounts manages to either find red-red, red or green netzwerkmenu too!
Red-extensions were removed at 2 times!
- HD recording to nfs ok!
new structural and constructive!
var / etc is mounted on boot after / etc. rw in it and everything is so can be processed!
usr/lib/enigma2/python was transferred into the var!
var usr + rw are thus freely editable!
usr is nich but completely rw / usr/lib/eniga2/python all of which contain important what one wants to change or supplement to hire ma! However, as always, with all applicable:
paperboard moving up too full or it might burst and not boot Thereby. always with df-h and see how much space is still available and always a free pad of mind 150kb left (must have e2 !!!).
Fixx:
-platzer are now difficult to make because now after / hdd swap is involved / and in the absence / defective hdd / stick is readonly and thus not writable!
shortens time-to-boot about 10sec (thx nit)
avibugfix included now! (thx nit)
new ethnic-cifs drivers optimized mainly! (thx nit)
-hdtv-nfs-recording on vox + kabel1 ok!
tdt-changes:
1080p-25 +30 hz now go (genial geiles bild!) Smoothly!!
2x green, you can adjust a / v directly
Other smaller-Fixx .....
known bugs:
TS-sharing via nfs on vox + kabel1 ok, rest of the sd-tv-hdtv sender and suspension / stuttering / trailer!
Just for swapfile on usb-stick/hdd a folder called: Creating a swap put on swapfile, off, on, done. telnet: Free should now show when swap not 0 more! Alternatively, use swappart (recommended!)
epg for saving on stick / hdd, then a folder: epg create and put it on usb / hdd epg save the setup!
for the record, ts, etc., as usual folder on the media partition (sda5 create):
mp3
Record
pictures
timeshift
own_movies
epg
swap
....
more infos about this gives you the var / etc / automount.ini
Many many thanks to TDT for the base image
a fat thx to obiwan, nit, max for the support for the Realization of the flash images and test it!
http://www.megaupload.com/?d=XCJ6C559
EVO-MINI-ufs910-e2-3p1-1472-FLASHSUITE_GoForIt
3p1 FLASHSUITE FLASHIMAGE 1472-MINI FÜR UFS-910!!!
FÜR WINDOOF -USER NUR FLASHABLE MIT DER FLASHSUITE 1.2.7
FÜR NFS/USB USER IS DER KERNEL SEP. DABEI UM DAMIT DANN JEDES X-BELIEBIGE E2 VON NFS/USB BOOTEN ZU LASSEN UM VON DORT AUS DANN EVO-MINI-1472 ZU CATTEN/DD (BEISPIEL: dd if=/tmp/EVO-MINI1472.img of=/dev/mtdblock6)!!!
WAS IST EVO-MINI:
DARIN IST DES SOGENANNTE MINIUBOOT VON "SOLALA" (FETTES THX NOCHMAL) ENTHALTEN!
DAMIT IST ES MÖGLICH VIA RC ON BOOT SEIN IMG AUSZUWÄHLEN WAS STARTEN SOLL, EGAL OB FLASH, USB ODER NFS!
DAZU MUSS MAN NUR DIE BOOTARGS IN DER FLASHUITE IM 3P1MINI.TXT ANPASSEN.
ES SIND EINTRÄGE VON 0-9 MÖGLICH! (SIEHE ENTSPR. TXT FILE)
DARIN MUSS VOR BOOTARGSÜBERTRAG UND NUR GANZ OBEN EURE IP,GW,SERVERIP,NETMASK
VON EUCH ANGEPASST WERDEN, SCHON KANN MAN FLASHEN UND DIE ARGS ÜBERTRAGEN, UND ES BOOTET DANACH AUCH DIREKT AUS FLASH SOFERN MAN JICH VIA RC WAS ANDERES WÄHLT!!! FÜR BOOTARGS-ERWEITERUNGEN ENTWEDER IM EVO-IMG FW_SETENV NUTZEN ODER HALT DES TXT ABÄNDERN UND NOCHMALS ÜBERTRAGEN.
OBIS ANLEITUNG FÜR DIVERSE MÖGLICHKEITEN FINDET MAN UNTER "ANLEITUNGEN" HIER IM BOARD!
-576i bugfixxed!
-networkbrowser plugin intergiert (fettes thx to "nit" der nun ne umsetzung mitentwickelt hat wo nfs+cifs gescannt werden können!)
was nun alle arten von share-mounts handhabt, entweder rot-rot, rot-grün oder im netzwerkmenu zu finden!
-extensions wurden entfernt auf 2mal rot!
neue struktur und aufbau !
var/etc wird on boot nach /etc eingebunden. alles is somit rw darin und kann bearbeitet werden!
usr/lib/enigma2/python wurde ins var verlegt!
usr+var sind rw also beliebig editierbar!
usr is nich komplett rw sondern /usr/lib/eniga2/python was alles wichtige enthält was man evtl ma ändern oder ergänzen möchte! bei allem gilt jedoch wie immer:
nich zu voll pappen sonst könnte es platzen und dadruch nicht mehr booten. immer mit df-h nachsehen wieviel platz noch frei ist und immer ein polster von mind 150kb free belassen (muss e2 haben!!!).
fixxes:
-platzer sind nun schwer möglich da nun nach /hdd /swap eingebunden wird und das bei fehlender/defekter hdd/stick nur readonly ist und somit nicht beschreibbar!
-bootzeit um ca 10sek verkürzt (thx nit)
avibugfix included now! (thx nit)
-neuer eth treiber vor allem cifs optimiert!!! (thx nit)
-hdtv-nfs-recording on vox+kabel1 ok!!!
tdt-changes:
-1080p 25+30hz gehen nun (genial geiles bild!!!) ruckelfrei!!!!
2x grün kann man a/v direkt umstellen
-weitere kleinere fixxes.....
known bugs:
TS via nfs-sharing auf vox+kabel1 ok, restliche sd-tv-sender und bei hdtv aussetzer/ruckler/hänger!
für swapfile einfach auf usb-stick/hdd einen folder namens: swap anlegen, auf swapfile stellen, off on, fertig. telnet: free sollte nun bei swap keine 0 mehr zeigen! alternativ swappart benutzen (empfohlen!!!)
für epg saving auf stick/hdd dort einen folder: epg anlegen und auf usb/hdd epg save im setup stellen!
für record, ts usw wie gehabt folder auf der media-partition(sda5) anlegen:
mp3
record
pictures
timeshift
own_movies
epg
swap
....
nähere infos dazu gibt einem die var/etc/automount.ini
vielen vielen dank an TDT fürs basis image
ein fettes thx an obiwan, nit ,max für die unterstützung zur verwirklichung des flashimages und des testens!
http://www.megaupload.com/?d=M5ASQFE2
http://www.multiupload.com/X3NOFB6JZZ
V1.7c
- fix BA detection for E2 in mini
- fix error create partitonen
- fix question 2bl on
- fix flash image name with spaces or other symbols
- check mini U-boot image name ( no *.tar.gz or *.ipk files allowed )
New realise ufs910_git_92_enigma2
DOWNLOAD ufs910_git_92_enigma2 24mb http://hotfile.com/dl/23039506/3ff6aad/
New realize ufs910_git_92_vdr_
DOWNLOAD ufs910_git_92_vdr 24 MB http://hotfile.com/dl/23039730/379086a/ufs910_git_92_vdr_release_incl_kernel.tar.gz.html
06.01.2010
http://www.mediafire.com/file/12wyzmryn12/Neutrino_GIT-92_PKT-79.tar.zip
e2_RSPv3.98_TDT_VER1749
UFS910 e2 stick image, all latest RSP updates included, based on TDT rev.1749
AC3 DownMIX is NO longer mandatory.
The most important thing that we want emphasize, regarding this new release, is that receiver is more stable now.
In order to avoid annoying situations when receiver stop responding, you will find a new feature, EMUwatch, that can be enabled/disabled from the RSP panel, the Start/Stop EMU menu option and the main goal is to act like a watch-dog for your active EMU
Many thanks to Team Ducktales for their Work!
Team Ducktales:
Twisted + 8.2
+ Various fixed volume
+ Tuner Driver advanced
+ To busybox stty, traceroute, netstat, and expanded
+ Fixed XML
+ Time synchronization with transponders will be forced
+ Tuner and CI separate kernel modules
+ Libeplayer2 http streaming mp4
+Pace & implement a function for the SWTS-based playback
+ Add missing proc file
+ Set as default evremote2
+ Tuner2 cam and handling (trial version)
+ Separating individual driver code into the kernel modules
+ Splitted all the tuner and your controller
+ Libeplayer2 http streaming MP4
+ Player131 hopefully fix the problem of sound
+ Added runtime detection mp4
+ Vob/m2ts only sending pts on ***frames, this might lead to mutch smoother playback
+ Added the m2ts extension plugin mediaplayer
+ Default player switch 76 -> 131
+ Fixed mute on channel change
+ Fix error yellow button menu
+ Tuxtxt enable exiting
+ Reaenable page up and down ***s, also enable the menu ***s
+ Set Downmix on / off on the fly
+ Enhanced tuxtxt config
+ Video + some fixes
+ Updated patch network nits, this MIGHT have better nfs performance.
RSP Update from last public image:
-s-a introdus instalarea e2 direct din Panel
-adaugat EmuWatch (auto-restart pentru IncubusCamd si Mbox)
-procedura noua de despachetare a modulelor
-adaugat in meniul de configurare A/V controale manuale pentru TINT, Contrast, Luminozitate (Brightness) si Culoare (Colour)
-interfata web rsp-webif a fost temporar inlocuita cu cea preluata din imaginea Enigma2 Dreambox
-reafisarea pe ecranul VFD a numelui canalului dupa ce a fost afisat mesajul de pornire emu
-adaugata capabilitatea de montare a tuturor formatelor valide ale partitiilor Linux si Windows
-mici modificari aduse in cwscript_e2.sh
-introdus ShareInfo 2.21, descarcarea adresei de *** de pe serverul RSP
-s-a introdus scriptul cwscript_e2.sh de actualizare SoftCam.*** (autor: stinkefisch)
-au fost adaugate noi module plugin, cum sunt afisarea permanenta a ceasului pe ecran (Permanent Clock), editarea listei de steliti, si multe altele
-configurarea implicita a CrossEPG a fost schimbata pe valoarea “small”
- linia de program epg din fisierul /etc/init.d/rcS a fost eliminate
pachetul de programme CrossEPG a fost actualizat, s-a adaugat si configurarea implicita a cestuia
-s-a adaugat in nucleul imaginii comanda “ipkg”
-au fost adaugate in imagine Restart_GUI si skin-ul BrushedAlu-HD
-a fost actualizata lista de canale (Settings) de pe server, s-au operat mici modificari in partea de cod
-reparat bug-ul cu subtitrarea si teletextul
-s-a adaugat montarea manuala pentru /hdd/movie
-s-a schimbat formatul listei de canale EnF, se descarca o zrhiva format zip
-reparat bug-ul din meniul de configurare a pozitioner-ului, nu mai apar ecrane verzi la comandarea motorului
-a fost inlocuit MyEPG cu CrossEPG
-s-a introdus config.usage.on_long_powerpress=standby
-a fost adaugata auto-testarea starii EMU dupa revenirea din starea de stand-by, se lanseaza auto-restart in cazul in care EMU e oprit (s-a adaugat emucheck.sh)
-multi-bouquet
-a fost adaugat config.usage.multibouquet=true
in cazul in care se depisteaza absenta /hdd/movie se creaza in mod automat
-a fost actualizat standby.diff
-corectii asupra mesajelor afisate pe ecran
-reparata resetarea camd3 emu dupa actualizarea de chei camd3 atunci cind camd3 nu este de fapt pornit
-Added E2 Install from RSP Panel
-Added EmuWatch (for auto-control of IncubusCamd and Mbox)
-New modules unpacking procedure
-added TINT, Contrast, Brightness, Colour in A/V settings menu
-rsp-webif is temporary removed, classic web-if included in image
-VFD restoring after emu start messages, former channel name back on VFD
-mount all valid partitions, Linux and Windows
-cwscript_e2.sh small changes
-New ShareInfo 2.21
-Update SoftCam.*** with cwscript_e2.sh by stinkefisch
-More plugins added, such as Permanent Clock, Sat List Editor, etc.
-Changed CrossEPG config default to small, removed epg line from /etc/init.d/rcS
-Updated CrossEPG package, added default configuration
-Ipkg added
-added Restart_GUI and BrushedAlu-HD skin
-Settings update from server, small changes on code
-Subtitle & teletext bug solved
-added manual mount for /hdd/movie
-changed Enf list download to zip format
-fixed “Positioner setup”, no more crashes on motor control
-replaced MyEPG with CrossEPG
-config.usage.on_long_powerpress=standby
-added emu off state check and auto-restart emu on comeback from -stand-by (emucheck.sh added)
-multi-bouquet
-config.usage.multibouquet=true
-add /hdd/movie if not exists
-updated standby.diff
-on screen display message corrected
-fixed camd emu reset after camd3 *** update if camd3 emu is not started
RSP Share Info for Incubus, Mbox, Mgcamd:
[img]http://www.novisf.com/wbb3/index.php?page=Attachment&attachmentID=38179&h=7aeb337b6b9d3753aa0a490262b3da5c0a1d89e2[/img]
[img]http://www.novisf.com/wbb3/index.php?page=Attachment&attachmentID=38180&h=687b0e09547dc63a57ece54514f56a336b2405b6[/img]
[img]http://www.novisf.com/wbb3/index.php?page=Attachment&attachmentID=38181&h=e946d4216627707af7a3532b079e702acde56e2e[/img]
http://www.easysurf.ro/9g8bqk521whq/e2_RSPv3.98_TDT_VER1749.tar.gz.htm
(das rar ist gesplittet wegen der 5MB Uploadgrenze):
Neutrino Flashimage Erstellen!
http://www.mediafire.com/?zz22ngjnjwl
Neutrino HD für die Kathi TDT rev1952 05.01.2010http://www.mediafire.com/?tdwlgqnjljm
UFS910_git_71_Neutrino_release_incl_kernel.tar.gz 03.01.2010http://www.mediafire.com/?ojmizj3zu5j
Enigma2 Team Ducktales Build rev1723 Points refreshed X-mas Edition
Standard / ext3 Image SoftUSB2 intended for installation on a pendrive or hard sata
- Mod deprived of Christmas decoration
- Current links addons
Polish Kathi Teamhttp://hotfile.com/dl/23688405/f61cdae/PKT_Xmas_refreshed.zip.html
http://rapidshare.com/files/334439404/AAF_Winterimage_UFS910-Flash.rar.html
[url]http://www.2shared.com/file/10647111/4c80946f/RSP_beta01_TDT1967_neutrino_uf.html[/url]
http://97.74.32.10/database/git_images/ufs910_git_135_enigma2_release_incl_kernel.tar.gz
ufs910_git_135_vdr_release_incl_kernel.tar.gzhttp://97.74.32.10/database/git_images/ufs910_git_135_vdr_release_incl_kernel.tar.gz
http://hotfile.com/dl/24074772/c762696/
DOWNLOAD offi_ufs922_git_104_enigma2_release_incl_kernel fromhttp://hotfile.com/dl/24075978/622d1d7/
DOWNLOAD ufs910_git_123_vdr_release_incl_kernel.tar from http://hotfile.com/dl/24075781/31b8f78/
http://hotfile.com/dl/24298558/d3e8884/
http://hotfile.com/dl/24298867/eff536a/
http://www.speedyshare.com/files/20355386/ufs910_git_135_neutrino_release_incl_kernel.tar.gz
updated on: 18.01.2010
Description:
aaf
***
+ AAF panel 7.9 (added VideoTune | several fixes and updates)
+ Volume Adjust (menu -> settings -> VolumeAdjust)
+ Cleanup Wizard (menu -> settings -> system ->...)
+ Crashlog Wizard (menu -> settings -> system ->...)
+ Media Center (IMDb Support | new Videplayer Filelist | Weather Plugin | WebRadioFS)
+ Miniuboot r1.3 update (for lzma compressed kernel, better compression and a littel more speed)
+ Repair mode (when error or bootloop)
+ Usbspeed (test usb storage speed)
+ Mixed lzma / zlib compression for / var (better compression and a littel more speed)
+ Usb-storage.usbwait123 kernel parameter (setting the boot sequence)
+ Ntfs read / write support (you can aktivate aaf in this panel)
+ Much fixed in samba server
E2 + only boot on error (you can aktivate aaf in this panel)
+ New online flash tool (with verify and tv output)
+ New system layout (for more / var free)
+ Partition load storages for problem (you can aktivate aaf in this panel)
+ Some fixes in ramswap
+ Wget, fsck, mkfs (precentage and vfd display on tv)
+ Much other fixes
Thanks to sh-receivers-developers for the great base image, and to all who have this image enables tested.
Your AAF Team
http://hotfile.com/dl/24696009/f8b9e91/AAF_M1645_g108_USB_e2.tar.rar.html