//mbox.cfg EXPLANATION and EXAMPLES


evo moj konfig 100 % radi D+ . Mbox 4.23 - PC Windows
--------------------------------------------------------------------------------
A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0



D: { 0 }

//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//default disabled

B: { 1 }

//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled


Z: { 12 } { 127.0.0.1 8000 }  

// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
//  x=0 -> don't print time stamp (in console screen and in debug file)
//  x=1 -> print time stamp ( .... )
//  y=0 -> no writing/sending informations to debug file/destination IP
//  y=1 -> send informations to destination IP but not in debug file
//  y=2 -> write informations to debug file but don't send to destination IP
//  y=3 -> write/send informations to debug file/destination IP
//  IP port -> destination IP and UDP port where to send informations
// no default



#C: { 127.0.0.1 7999 }

// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default


U: { 1 }

// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled



L: { 1 }

// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1


#G: { /hdd/ }

//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!


T: { ./ }

// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }



K: { ./ }

// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }





M: { 1 }

// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0


P: { /tmp/pmt.tmp }


// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2

W: { 0 }

// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled



Q: { 300 }

//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.


F: { 500 }

//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB



///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
//V: { card_type device clock inverse_Reset}
#V: { 3 1 3571200 0 }
#V: { 3 2 3571200 1 }
// card_type:
// Seca 3 , 1rd3t0 4, Conax 5, Cryptoworks 6, Viaccess 7, NDS 8, Nagravision 9

// device:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10


//clocks for COM ports in Hz
//for SCI slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz

//Inverse Reset
// 1 -yes
// 0 -no
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//


J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled


R: { 3600 }
// only for gboxx, dont work on mbox protocol
// R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
//default in code 3600 seconds



H: { 0 0 0 0 0 0 }
// only for gboxx, dont work on mbox protocol
// H option -> mapping provid (0-disabled, 1-enabled)
//H: { a b c d e f }
//a-> mapping all 0BXX to 0B00
//b-> mapping 1810 to 1801
//c-> mapping 1803 to 1801
//d-> mapping 1802 to 1801
//e-> mapping 1815 to 1801
//f-> mapping 1822 to 1801




S: { COM2 }
//S option -> enable sssp protocol
//S: { x}
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1

ovo je u moj cwshare.+ verziju sto sam postavio na forum = 100% radi D+ bez problema sa ispravnom kartom

I: { 02 }

X: { 10 }

N: { 00 01 03 3F 4000 6000 }


sada sa ovim postavkama gledam D+

-----------------------------------------------------
znaci samo eksperimentiraj sa kartama dok ne nadzes neku sto radi

Ok hvala kolega ali nemam nikakvih trzaja sve radi prelepo .

i meni je dobro radio sa tom N linijom od gboxa ,a sad sam stavio ovu evo vec 20 minuta ni jedan trzaj nije napravio , izgleda da jos bolje radi ,eh da nije toga D+ cista petica bi bila

naravno da bolje radi,kad je sam autor mboxa to napomenuo

N: { 00 01 03 3F 4000 6000 } - neispravno

N: { 4000 2000 } - ispravno

kaj se tice D+ potrazi drugog peera,pa ces vidjeti da radi  a025

N: { 4000 2000 }
N: { 400 200 }

Sad si mi naveo dva primjera , jel ovaj donji tocan ? Probao sam oba i nisam vidio neku razliku, ostavio sam N: { 400 200 }

izvini,moja greska

ovo je ispravna N: linija

N: { 400 200 }

jel ima di objasnjeno kako se ovo pokrece, one datoteke sam prekopirao u windowsw system32 folder i program se ptvori ali ne iscitava karte uopce.

Taj program nece ni da radi dok se te prilozene dll datoteke ne kopiraju u windows, a za mbox uopce ne koristim plugin jel nije potreban samo pokrenem mbox control koji sam pokrene mbox i uspostavi vezu sa risiverom preko sssp rs232 kabla.

Rijesio sam ovaj problem ali samo djelomicno otvara mi d+ ali samo sa nagrom 1801 ReShareN3 2.25d/nagravision CAid, a sa 01004106 Digital+(19E)[tunneled SecaNagra] nece, jel to normalno za mbox 0.4 023 ili je to inace problem mboxu sto ne vjerujem, a ovih kartica mi dolazi puno i to dosta ispravnih koje mi rade na gboxu inace. jel zna netko o cemu se radi ?