CardSharing-X
» Receivers « => Other HDTV Receivers => » HDTV « => Octagon HD => Topic started by: antox on December 26, 2009, 01:23:03 PM
-
Octagon Softcam Key Editor
Software interface to edit/update softcam/tps via internet.
-
PolarEdit v. 0.2.1 for OCTAGON USB serie (918, 908, 818, 718)
hier eine neue Testversion ( 0.2.1 ) mit folgenden
Änderungen zur Vorgängerversion:
- Russische Buchstaben werden nun berücksichtigt.
- Screentips hinzugefügt / vervollständigt.
- CrashBugs beseitigt - allg. Stabilisierung
- DragImage nun auch unter Win7 und Vista.
- Bug: Settings für 718/818/908/918 gefixt.
- Settings erweitert. (aber noch unvollständig)
- Optionsdialog hinzugefügt.
- Online-Hilfe erweitert.
- Sortieren der Alle-Liste ist nun zusätzlich über die Favoritenordner möglich
-
Loader Octagon HD SF1018 SF1008 Alliance RS232 FAQ German
Loader Octagon HD SF1018 SF1008 Alliance RS232 FAQ German
Instructions installed
Other languages also available
Suitable for SF 1018 and SF 1008 Models
see the appendix
Thanks to Octagon88
-
B]The procedure for uploading a new Loader Octagon
What will we need?[/B]
- The department by rs-232 null modem cable
- Putty
- Loader_usb_octagon.bin - a new loader for our acetate
- Pendrive to FAT partition
Proceed to the fun.
1. We connect the tuner via RS-232 with our computer and run on it or putty hypeterminal
2. Configure Putty to communicate with our a PC:
- Connection type: Serial
- Speed: 115200
3. Turn off the power behind our Tuner
4. Tuner and run quickly to the terminal a few times we click enter to stop the boot process:
U-Boot 1.1.2 (Jun 15 2009 - 12:00:39) - st2.0-14
0 * FrTs
STi710x>
5. Copy your new loader_usb_octagon.bin directly on the flash drive partition
6. PCta remove the pen and put a USB interface to the front of our models supported
7. Begin the process of exchange loader in hyperterminal type the following command
Select all
usb reset
fatload usb 0:1 a5000000 loader_usb_octagon.bin
protect off 1:0-23; erase 1:0-23; cp.b 0xa5000000 0xa0000000 $ filesize; protect on 1:0-23
NOTE: If there are errors we will not disable the tuner, but trying to repeat the operation until it succeeds.
An example of correct installation log is as follows:
STi710x> usb reset
(Re) start USB ...
USB: scanning bus for devices ... 3 USB Device (s) found
scanning bus for storage devices ... 1 Storage Device (s) found
STi710x> fatload usb 0:1 a5000000 loader_usb_octagon.bin
reading loader_usb_octagon.bin
.........................
262,787 bytes read
STi710x> protect off 1:0-23; erase 1:0-23; cp.b 0xa5000000 0xa0000000 $ filesize; protect on 1:0-23
Un-Protect Flash Sectors 0-23 in Bank # 1
........................ done
Erase Flash Sectors 0-23 in Bank # 1
........................ done
Copy to Flash ... . done
Protect Flash Sectors 0-23 in Bank # 1
........................ done
STi710x>
8. If everything goes according to plan we can execute reboot
Select all
reset
At the moment there are 2 different loadery:
- Loader, which allows for loading e2 with USB Flash Drive
- Loader, which allows the loading of e2 when we installed the USB SATA drive Presets
WARNING!
Uploading loader operation is dangerous and can damage the tuner!
PKT can not be held responsible for this situation!
Gracias a djcrash
-
Octagon Tools & Editor
Update Manual :
- Download V10789__04_02_10.ird to STB
- unpack HDD-Temperatur_SF1008_SF1018_Octagon_10022010.rar
- Copy "plugin" folder to USB Stick
- Connect USB Stick to STB
- Download "plugin" (you can find "plugin" with Left/Right button of Remote)
- Menu - Utilities - Plugin :
--> HDD Temperatur
Green Button : Start Plugin
--> In VFD Display you will see HDD Temperature C° !
-
Octagon Tools & Settings
PolarEdit_OCTAGON_1008_1018_Setup_V0.2.15 - 16 Feb 2010
Änderungen zur Vorgängerversion:
- Sortierung der Satelliten hinzugefügt. a) Sortierung nach Alphabet ; b) Sortierung nach Orbitalposition (nach Längengrad)
- "Aktive-Satelliten-Option" hinzugefügt. a) Alle Satelliten, auf denen Kanäle vorhanden sind, oder b) Alle Satelliten, deren Daten komplett vorliegen.
- Satelliten / TP Ansicht nun als Option auch mit strikter Trennung zwischen TV- und Radiokanälen. (in den Optionen einstellbar)
- Satelliten können hinzugefügt werden.
- Transponder können hinzugefügt werden.
- Löschen eines Transponders hinzugefügt.
- Löschen aller leeren Transponder hinzugefügt.
- Löschen aller Kanäle eines Transponders hinzugefügt.
- Neue Kanäle können hinzugefügt werden.
- Die a) Spaltensortierung (Anordnung),
- sowie die b) Spaltenbreiten bleiben auch nach einem Neustart erhalten.
- Spalten können ausgeblendet werden. (Rechtsklick auf den Header.) Je Dokument können verschiedene Spalten ausgeblendet werden. Eine Speicherung erfolgt nicht.
- Zusätzliche Ansicht (Liste) hinzugefügt. (Bisher war nur die Detailansicht enthalten.)
- Der Provider ist in die Kanalansicht aufgenommen worden (eigene Spalte).
- Hintergrundfarbe der Ansichten geändert.
- Das Flimmern der Kanalansicht wurde spürbar reduziert.
- Copy&Paste wurde beschleunigt.
- Beim Copy&Paste werden die Favoritenzuordnungen wahlweise gelöscht / nicht gelöscht. (Optionen)
- Die Sortierung der Favoritenordner per Drag&Drop hinzugefügt.
- Die Codepage der Favoritenordnernamen kann über die Optionen geändert werden.
- Die Favoritenzuordnungen können nun auch über das Kontextmenu entfernt werden.
- Favoritenzuordnung in den Kanaleigenschaften hinzugefügt.
- Beim anklicken (auswählen) eines Kanals werden die zugehörigen Favoritenorder farblich markiert.
- Timer bleiben nach einer Sortierung der Kanalliste erhalten.
- OnlineHilfe erweitert.
- Bug: Die Beschriftung von Transpondern erscheint auch nach der Bearbeitung.
- Bug: falsche Zuordnung von Kanälen beim löschen von Favoritenordnern behoben.
- Bug: Support-Thread-Link angepasst.
- Bug: Änderung von Satellitendaten gefixt
-
KeyEdit octaCAM V1.10
KeyEditOctagon_SF10x8_HD
- For octaCAM MCAS EMU Plugin
- Keydata.tmp files
-
Octagon SF 1018 HD (Tools, others)
Manual W-LAN
English version
-
OCTAGON_SAT-FINDER_SF28-LCD_New.
Weltneuheit : OCTAGON SAT-FINDER SF28-LCD New
-
Online SW Update OCTAGON SF1018 HD Alliance
-
NEW_OCTAGON_SAT-FINDER_SF28_LCD_ALL
-
card reader for enigma 2
-
PolarEditOctagon918 V0.3.5.15
20. Mai 2010
Changes to previous version:
- Added French language. (Thanks to stephan94)
- Added Spanish language part. (Application-specific translation is missing - wanted translator.)
- The individual languages can now be set by the user on the Ribbonbar. (Regardless of the Windows system settings)
- Added sorting of the satellites. a) sort by alphabet, b) according to orbital position (by longitude)
- "Active-satellite option added. a) All satellites on which channels are available, or b) all satellites, of which the data as a whole.
- Added Strict separation between TV and radio channels.
- The a) Column sorting (order),
- And b) Column widths are retained even after a reboot.
- Additional view (list) added. (So far only contain the detailed view was.)
- Changed the background color of the views.
- The twinkling of the canal view was noticeably reduced.
- 'Double Click-Open' problem fixed
- When (click) select a channel to mark the associated Favorites folder highlighted.
- Added Sorting the Favorites folder by drag and drop.
- The favorite assignments can now be removed via the context menu.
- Favorites assignment added to the channel characteristics.
- UDB conversion / adaptation (Thanks to dima381, a123, e-dok and Alex5114)
- Migration to Unicode.
- Statistics dialog has been revised / expanded.
- Improved copy & paste from 'other' settings.
- Copy & Paste significantly accelerated.
- The selection of channels is now following a view change (detais / List) received.
- Update of views on change of transponder frequency, improved.
- Added option for printing individual satellite channels / transponder
- Bug: Fixed printing of favorites.
http://www.multiupload.com/DGGNXOTNA7 (http://www.multiupload.com/DGGNXOTNA7)
-
OCTAGON_USB_Background-Converter-ENG.rar
OCTAGON_USB_Background-Converter-ENG.exe.
--> Converter for Menu Main Image and Radio Image
--> Use please JPEG pictures for converting
--> Background Format : .mpg
--> Jpeg picture size max. 720x576 pixel
Instruction :
1. Open Program :
--> OCTAGON_USB_Background-Converter-ENG.exe
2. Press "Select Image file" ...
--> It opens new windows
3. Select a suitable JPEG picture (max. 720x576 pixel)
4. Press "Save as ..." ...
--> It opens new windows
--> Select place for Save as under...
5. Press "Convert Background"
--> Status : Converting wait...
6. Converting finished .
Instruction Background to Receiver :
--> They can update Background files either with USB Stick or
with OctagonSoftTool v1.00.exe Program (RS232).
With USB Stick :
1. Please copy Background file (.mpg) to USB Stick
2. Connect USB Stick with Receiver
3. Select mpg File and press OK
and comfirm update START with OK
4. Receiver make update and Boot new
5. Press Menu - System Setup - OSD
Select for Main Iamge & Radio Image
User and EXIT & OK save. Enjoy :-)
With OctagonSoftTool v1.00.exe (RS232):
1. Pls. Turn OFF STB with Power Switch
2. Connect STB & RS232 Cable to PC
3. Pls. Turn ON STB with Power Switch
4. Pls. open program "OctagonSoftTool v1.00.exe"
5. Press COM 1-4 Icon and select COM Port 1-4
6. press Connect Icon and YES
7. Now Conencting ready STB to PC
8. Important : STB still on Standby mode
9. Pls. press IMAGE Icon and OK
10.Select Background file (.mpg)
11.Pls. wait for update finishing and STB will make reboot
12.Press Menu - System Setup - OSD
Select for Main Iamge & Radio Image
User and EXIT & OK save. Enjoy :-)
Important : only for OCTAGON SF918, SF908, SF818 und SF718 models
-
OctagonSoftTool v1.01 USB eng.rar
OctagonSoftTool v1.01 USB eng + more in readme
-
Installation Octagon Firmware (abbreviated FW)
-
Cccam FAQ Tool 1.1b
-
PolarEdit 10x8 Setup V0.4.2.7 - 17 July 2010
Hier die neueste Version von Polarstern:
Änderungen zur Vorgängerversion:
- Der ÖffnenDialog wurde um das *.sys Suffix erweitert.
- Systemeinstellungen können geändert werden. (ist nur bei einer *.sys Datei möglich)
- Zusätzlich zur *.fdu wird nur noch die 193Kb *.sys unterstützt. (Die 257Kb *.sys nicht mehr.)
- Erweiterung der Antenneneinstellungen (T1 / T2 / Unicable / Positioner hinzugefügt).
- Die Spaltenbreite der Listendarstellung kann verändert werden. (über den Schieberegler in der Statusbar)
- Das Verhalten der linken View bei einer FavoritenCodepage-Änderung verbessert.
- Die Favoriten-Codepage kann zusätzlich über das Kontextmenu geändert werden.
- Die Markierung der Kanäle bleibt nach einem Ansichtswechsel (Detais/Liste) erhalten.
- Frontdisplay Steuerzeichen bleiben erhalten / können geändert werden.
- Kanaleigenschaften erweitert.
- Statistikinformationen erweitert, und den verschiedenen Skalierungen angepasst.
- Timer können eingesehen und gelöscht werden.
- EPG Timernamen bleiben erhalten.
- Aktualisierung der Ansichten, bei Änderung einer Transponderfrequenz, verbessert.
- Ftp-Datentransfer zwischen PC und Receiver hinzugefügt.
- Migration auf Unicode.
- Windows 7 Stil hinzugefügt
- RestartManager hinzugefügt (falls PolarEdit einen Crash erleidet - PolarEdit muss mindestens 60Sec aktiv gewesen sein.)
- Bei einem Doppelklick (bzw. Enter) auf einen Kanal wird das EigenschaftsFenster aktiv gesetzt.
- Bessere Darstellung der Icons bei unterschiedlichen Skalierungen.
- Eigenschaftsfenster können über die Ribbonbar aktiviert werden.
- Neuen EigenschaftsDialog (AppOptionen) hinzugefügt.
/dl/55666858/f4d8452/PolarEditOctagon1018Setup_0.427.zip.html[/url]
- Die Hintergrund-/Textfarbe der Ansichten kann geändert werden.
- Provideransicht in der linken View hinzugefügt.
- Alle Kanäle eines Providers können über das Kontextmenu zu einer eigenen neuen Favoritengruppe übernommen werden.
- Druckmöglichkeit für Kanäle einzelner Satelliten / Transponder / Provider hinzugefügt
- Die Englische Sprache hinzugefügt. (ist über die Ribbonbar auszuwählen)
- Bug: Drucken von Favoriten korrigiert.
http://hotfile.com/dl/55666858/f4d8452/PolarEditOctagon1018Setup_0.427.zip.html (http://hotfile.com/dl/55666858/f4d8452/PolarEditOctagon1018Setup_0.427.zip.html)
-
Loader für Octagon SF 1018 und 1008, inkl. FAQ,
-
Loader Octagon SF1018HD V.1.23
23.09.2010