CardSharing-X
» Receivers « => DreamBox Emulators => » DREAMBOX ZONE « => Other emu => Topic started by: antox on January 06, 2010, 12:17:18 PM
-
SBox 0.0.4-6
SBox 0.0.4-6
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (PowerPC, MIPS, X86 & wrt54gl)
What's New? 0.0.4-6
-Bugs solved
+Added support for *** smartcards
+Added support for 1rd3t0 smartcards
+Added support for Tiger/Ncmed smartcards
+Added Webinterface
ToDo
+Sleep alot
SmartCards Supported:
System EMM ECM SCI Phoenix
-----------------------------------
Nagra2/3 OK OK OK OK
Nagra Tiger/NCMED OK OK OK OK
Viaccess KO OK OK OK
Seca OK OK OK OK
1rd3t0 OK OK OK KO
*** KO OK OK KO
sbox.ppc enigma1
sbox.mips enigma2
sbox.x86 Linux PC
sbox.wrt54gl Linksys router
sbox config
main]
server_only=0 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=0 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=0 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/****/port.list # path from port.list
#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#1rd3t0 Example
[CCCCCCCC] # 1rd3t0 camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7users.sbox
sBox
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (PowerPC, MIPS, X86 & wrt54gl)
What's New? 0.0.4-6
-Bugs solved
+Added support for *** smartcards
+Added support for 1rd3t0 smartcards
+Added support for Tiger/Ncmed smartcards
+Added Webinterface
ToDo
+Sleep alot
SmartCards Supported:
System EMM ECM SCI Phoenix
-----------------------------------
Nagra2/3 OK OK OK OK
Nagra Tiger/NCMED OK OK OK OK
Viaccess KO OK OK OK
Seca OK OK OK OK
1rd3t0 OK OK OK KO
*** KO OK OK KO
sbox.ppc enigma1
sbox.mips enigma2
sbox.x86 Linux PC
sbox.wrt54gl Linksys router
sbox.conf
[main]
server_only=0 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=0 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=0 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/****/port.list # path from port.list
#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#1rd3t0 Example
[CCCCCCCC] # 1rd3t0 camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#*** Example
[CCCCCCCC] # *** camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
users.sbox
#Example configuration file for sbox cardclient server
# [slot0] # slot to connect
# user=edk # user
# pass=edk # password
# au=1 # au on/off
# [slot1] # slot to connect
# user=edk2 # user
# pass=edk2 # password
# au=0 # au on/off
port.list
SA: { 0001 } # Channel1
SA: { 0002 } # Channel2
SA: { 0003 } # Channel3
SA: { 0004 } # Channel4
-
sbox 0.0.4.6+cccam 2.1.3
scripts, files and configurations
Enigma 2
be included in various folders with permissions 755
Bottom slot sbox
slot Superoro CCcam
Gracias a pappa
-
sBox For Edg Nemesis
sBox 0.0.4.6
-
22.01.2010
sBox 0.0.4-6 for Oozoone image
-
sBox 0.0.4-6 for LS image
-
sbox.0.0.4_2.4-r7 for oozoone image
: install
copy the ipk to / tmp or / on the box (I prefer hdd / hdd, because if you reflashing the box, I need not again until the download package).
then press the blue button and select the plugin more user scripts. second posiotion you have there the possibility, ipf's install. if you did the first time a packet emu installed in a fresh image, so you have to start the new box, so that the symlinks created active
-
SBox 0.0.4-7
____
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (PowerPC, MIPS, X86, wrt54gl, SIGMA & SH4)
What's New? 0.0.4-7
-Fixed hight CPU usage on mips version
-Fixed EMM handling on NAGRA smartcards
-Fixed EMM handling on SECA smartcards
-Fixed ECM handling on VIA smartcards
+Added EMM support for NDS smartcards (not fully tested)
+Added support for CONAX smartcards
+Added algo to get RSA "n" from dt08 (nagra)
+Added multitunner support for E2 machines
+Added multiemm thread support (ppc/mips/sh4)
+Added smartreader support (experimental)
+Compiled version for X86_64bits (not tested)
+Compiled version for SIGMA (not fully tested)
+Compiled version for SH4_e2 (not fully tested)
For SH4 users; Some cards don't work on internal cardreader, it's not sbox problem.
ToDo
+Sleep alot
SmartCards Supported:
===================+===+===+===+=======+===========+
System |EMM|ECM|SCI|Phoenix|Smartreader|
===================+===+===+===+=======+===========|
Nagra2/3 |Yes|Yes|Yes|Yes |Yes |
-------------------+---+---+---+-------+-----------|
Nagra Tiger/NCMED |Yes|Yes|Yes|Yes |Yes |
-------------------+---+---+---+-------+-----------|
Viaccess |No |Yes|Yes|Yes |Yes |
-------------------+---+---+---+-------+-----------|
Seca |Yes|Yes|Yes|Yes |Yes |
-------------------+---+---+---+-------+-----------|
1rd3t0 |Yes|Yes|Yes|No |No |
-------------------+---+---+---+-------+-----------|
NDS |?? |Yes|Yes|No |Yes |
-------------------+---+---+---+-------+-----------|
Conax |?? |Yes|Yes|?? |?? |
-------------------+---+---+---+-------+-----------+
Protocols Supported:
-
Auto Istallanti Sbox0047+CCcam213_E2
For Nabilosat
Sbox0047+CCcam213_E2 Version 2 mipsl e config
-
SBox 0.0.4-7 #2 for Edg-Nemesis Image
-
S-Box 0.0.4-7 #4
Sbox 0.0.4-7 for Eurocam Image Enigma2
-
Scripts for Sbox
-
CCcam 2.1.4 + Sbox 0.0.4-7 for Gemini E1
CCcam+sbox addon
Because we dont have sbox on blue panel i assembled CCcam 2.1.4+sbox 0.0.4-7 selfinstall tar.gz addon for E1. Most cards work with default config, for some cards you must provide your own card serial and put him in sbox.conf (easiest way to get cardserial is to run sbox manually via telnet and read the cardserial from sbox output)
Sbox management console have address http://your-dreambox-IP:8181 (http://your-dreambox-IP:8181)
If somebody needs this but for E2 please let me know
mfg, Andrija
-
Sbox 0.0.4.7.4 for Evolution image
tbz2 file manuall install /tmp
-
Sbox + CCcam for Sif-Team
Reads all the cards ( Nds, 1rd3t0, Viaccess, Nagra, other) this the file is self installing.
-
[admin]This is the file section No questions in this section[/admin]
-
Box 0.0.4-b
(emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz)
What's New? 0.0.4-b
-Removed gbox support
-Removed cccam support
+Some fixes on $$$$$ smartcards
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/SYS755UODR)
-
Here are the files needed to canvas image sbox in v3:
boot script
sbox.mips
user.sbox
sbox.conf
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/T814LQOE5Z)
-
____
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz)
What's New? 0.0.4-c
-Fixed some bugs found in the latest version
-Updated gcc compiler (e1/e2)
!This version are not fully tested
thx EDK
DOWNLOAD - SBox 0.0.4-c Public.zip (http://shrta.com/files/0FMVOFK5/SBox 0.0.4-c Public.zip)
-
Here are the files needed to canvas image sbox in v3:
boot script
sbox.mips
user.sbox
sbox.conf
Put the files in the folders of the dream as they appear in the file once it descomprimais to you below, and you give 755 permissions to each file and go.
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/AIETOJQXQQ)
-
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz)
What's New? 0.0.4-d
-Fixed bug when parsing pmt
-Changes on nagra io funcs (once again)
+CCcam cardclient support it's active again, no emm/server support atm (see users.sbox for details)
!This version are not fully tested
DOWNLOAD - SBox 0.0.4-d Public.zip (http://shrta.com/files/KKEWYGW1/SBox 0.0.4-d Public.zip)
-
Sbox 0.0.4d for gemini e2
DOWNLOAD - sbox gemini e2.tar.gz.zip (http://shrta.com/files/1VKZ84WA/sbox gemini e2.tar.gz.zip)
-
Sbox 0.0.4 d for EDG Image
DOWNLOAD - e2Sbox_0.0.4.9d.tbz2 (http://shrta.com/files/1ZC1GEMJ/e2Sbox_0.0.4.9d.tbz2)
DOWNLOAD - Sbox_0.0.4.9d.rar (http://shrta.com/files/1XRPORIX/Sbox_0.0.4.9d.rar)
-
New SBox 0.0.4-d #2
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz)
What's new? 0.0.4-d #2
-Some related changes with nagra cards (experimental)
DOWNLOAD - SBox 0.0.4-d _2 Public.zip (http://shrta.com/files/1NQYFEI8/SBox 0.0.4-d _2 Public.zip)
-
SBox 0.0.4-d#2/CCcam 2.1.3 Addon for Nabilo E1 & E2
Made by me and E2 tested by me!
E1 I couldnĀ“t test because have no E1-Box left!
please test and give Feedback!
THX
DOWNLOAD - e1_Sbox004d2_CCcam_nab.rar (http://shrta.com/files/O1IIHEMR/e1_Sbox004d2_CCcam_nab.rar)
DOWNLOAD - e2_Sbox004d2_CCcam_nab.rar (http://shrta.com/files/VB6QP32Y/e2_Sbox004d2_CCcam_nab.rar)
-
New SBox 0.0.4-e #2
| _ \
___| |_) | _____ __
/ __| _ < / _ \ \/ /
\__ \ |_) | (_) > <
|___/____/ \___/_/\_\ (emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz)
What's new? 0.0.4-e #2
-Fixed portlist bug
What's new? 0.0.4-e
-More changes related with nagra cards
+Added channelinfo support (see sbox.conf for details)
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/E7AJZ09H49)
-
Sbox 0.0.4 e#2 for EDG Image
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/4DXWPZGSP5)
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/Y8OMG2AI1B)
-
Sbox 0.0.4-f for vix image
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/GRCZ8OG7ZS)
-
SBox 0.0.5-0 #2 for gemini e2
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/G43MOH6ECD)
-
(emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz)
What's new? 0.0.5-0
-Fixes on cccam protocol (server/client)
+Added betatunnel support (see sbox.conf for details)
+More options for newcamd clients (see users.sbox)
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/PS8K8AG6YL)
-
(emu/cardserver for PowerPC, MIPS, X86, SH4 & Freetz) What's new? 0.0.5-0 #3 -Fixes on cccam protocol (server/client)
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/REQP2EXTKM)
-
for blackhole
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/WKR0FRFNHR)
-
[SIZE=5][COLOR=Blue]SBox 0.0.5-0 #3 for VTI Image[/COLOR][/SIZE]
:download:
Multiupload.com - upload your files to multiple file hosting sites! (http://www.multiupload.com/CMFELHJXFS)
-
SBox 0.0.5-2 #B (Tests)
- (CCcam) continue to bingo ... To see how this works in the server
- (General) Added-a switch in the boot, the sbox.conf server_only ignored (for more info. / Sbox-h)
SBox 0.0.5-2 #B(arm11) (http://www.datafilehost.com/get.php?file=b10e2a84)
-
SBox 0.0.5-2 #C Testing
Sbox 005-2 C pure Emu
Sbox 005-2 C/CCcam213
Sbox 005-2 C/CCcam230
and
Sbox 005-2 C/MGcamd1.38 for BH-Image and also for Nabilo E2
Sbox005-2-C_E2_bh.tgz
Sbox005-2-C+CCcam213_E2_bh.tgz
Sbox005-2-C+CCcam230_E2_bh.tgz
Sbox005-2-C+Mgcamd138_E2_bh.t
DepositFiles (http://depositfiles.com/files/tt6m5hv7p)
-
For EDG also New DE!
Tested on my good old "New DE 1.0"
DepositFiles (http://depositfiles.com/files/ab2ewkywh)