Author Topic: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver (Read 15017 times)

antox · « **Reply #60 on:** September 13, 2010, 06:51:37 PM »

The file from the openbox ends on .dbs but this program does not support it.
However you can change de ending dbs to .abs and then open the file with this program.
It will suport it.
Then after saving you need to alter it back to .dbs

hooley · « **Reply #61 on:** September 13, 2010, 07:04:43 PM »

Quote from: antox

The file from the openbox ends on .dbs but this program does not support it.
However you can change de ending dbs to .abs and then open the file with this program.
It will suport it.
Then after saving you need to alter it back to .dbs

looks familiar a025

guigui62 · « **Reply #62 on:** September 13, 2010, 11:05:54 PM »

Quote from: antox

The file from the openbox ends on .dbs but this program does not support it.
However you can change de ending dbs to .abs and then open the file with this program.
It will suport it.
Then after saving you need to alter it back to .dbs

No, you can use directly yhe .ABS file.

poltu · « **Reply #63 on:** September 24, 2010, 03:56:16 PM »

935343 Mad box. Trying all chid all the time for 1rd3t0. Cant detect valid and invalid chid. connie_13

Experts are requested to do something.

vjihhh For conax working great vjihhh

antox · « **Reply #64 on:** October 19, 2010, 12:36:13 PM »

SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 04/10/2010 ! <<<

poltu · « **Reply #65 on:** October 19, 2010, 03:42:42 PM »

Quote from: antox

SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 04/10/2010 ! <<<

hehe Only Background changed

You are not allowed to view links. Register or Login

antox · « **Reply #66 on:** October 21, 2010, 09:50:59 AM »

SatHawk/Solomend HD PVR800 Fw Version vom 20/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 20/10/2010 ! <<<

Changelog:
NM_HDS2_CMT_1010200755

1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as serverr

antox · « **Reply #67 on:** October 19, 2010, 12:36:13 PM »

SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 04/10/2010 ! <<<

poltu · « **Reply #68 on:** October 19, 2010, 03:42:42 PM »

Quote from: antox

SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 04/10/2010 ! <<<

hehe Only Background changed

You are not allowed to view links. Register or Login

antox · « **Reply #69 on:** October 21, 2010, 09:50:59 AM »

SatHawk/Solomend HD PVR800 Fw Version vom 20/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 20/10/2010 ! <<<

Changelog:
NM_HDS2_CMT_1010200755

1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as serverr

antox · « **Reply #70 on:** October 19, 2010, 12:36:13 PM »

SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 04/10/2010 ! <<<

poltu · « **Reply #71 on:** October 19, 2010, 03:42:42 PM »

Quote from: antox

SatHawk/Solomend HD PVR800 Fw Version vom 04/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 04/10/2010 ! <<<

hehe Only Background changed

You are not allowed to view links. Register or Login

antox · « **Reply #72 on:** October 21, 2010, 09:50:59 AM »

SatHawk/Solomend HD PVR800 Fw Version vom 20/10/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 20/10/2010 ! <<<

Changelog:
NM_HDS2_CMT_1010200755

1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as serverr

antox · « **Reply #73 on:** November 15, 2010, 07:13:41 PM »

SatHawk/Solomend HD PVR800 Fw Version vom 08/11/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 08/11/2010 ! <<<

Changelog:
What's New:
1 .. Sat List contains a number of additional satellites.
2 .. CA Slot Settings additional feature included 'Edit Smartcard Config' which seems to be for 1rd3t0 based cards.
3 .. When entering Hex values in Key sections, the symbols are no longer recognised.
An example of this would be:
Enter 1 and only 1 is displayed, Enter 2 and you still get the option of a b c 2, as the letters a-f are included in Hex values.
The following numbers 0 1 4 5 6 7 8 9 will enter directly, making it much easier, and quicker to directly enter any Hex keys.

And entering BISS Keys will still achieve nothing, which is a shame.

I have also noticed, that the modified date of this official release is, '‎01 ‎January ‎2008, ‏‎01:28:58' which seems rather odd ?.

antox · « **Reply #74 on:** November 15, 2010, 07:13:41 PM »

SatHawk/Solomend HD PVR800 Fw Version vom 08/11/2010
MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 08/11/2010 ! <<<

Changelog:
What's New:
1 .. Sat List contains a number of additional satellites.
2 .. CA Slot Settings additional feature included 'Edit Smartcard Config' which seems to be for 1rd3t0 based cards.
3 .. When entering Hex values in Key sections, the symbols are no longer recognised.
An example of this would be:
Enter 1 and only 1 is displayed, Enter 2 and you still get the option of a b c 2, as the letters a-f are included in Hex values.
The following numbers 0 1 4 5 6 7 8 9 will enter directly, making it much easier, and quicker to directly enter any Hex keys.

And entering BISS Keys will still achieve nothing, which is a shame.

I have also noticed, that the modified date of this official release is, '‎01 ‎January ‎2008, ‏‎01:28:58' which seems rather odd ?.

News:

Author Topic: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver (Read 15017 times)

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

hooley

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

guigui62

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

poltu

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

poltu

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

poltu

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

poltu

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver

antox

Re: SatHawk/Solomend PVR800 WorldDVB DVB-S2 HD FTA Receiver