SatHawk/Solomend HD PVR800 Fw Version vom 16/11/2010
       MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 16/11/2010 ! <<<

Changelog:
What's New:
Added: CCcam priority option
On bootup: Now it only displays Server 1 - Server 2 - Server 3 etc inplace of your cline info
Security Password: When entering secure sections such as the CCcam section, you will need to enter the Password 0 0 0 0
Other: A number of minor fixes has also been addressed.

I have noticed a rather bad error in this version, the receiver will reboot if you attempt to make a full dump file,
you can however make misc file dumps okay ....
And as this is an official release, you will be required to add your own channel list, replace.list and priority file.

SatHawk/Solomend HD PVR800 Fw Version vom 06/01/2011


       MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

>>> Version vom 06/01/2011 ! <<<


The New Official Firmware version do not include any channels.

Changelog:
Zitat:
What's New:
In version [HDS2-11-01-02:0899CMT] the following have either been added, fixed or changed:
1 .. Making a full system dump is now fixed.
2 .. CCcam Priority option added.
3 .. Constant cw and Biss fixed.
4 .. Security Password when entering sections such as the CCcam section, has now been deactivated.
5 .. On Bootup, the display will once again show the IP Address used in your clines.

Well over 200 new or updated channels on various satellites.
Re-organised channel list on a number of satellites.
A number of non accessable channels removed from various satellites.

I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.