Download function introduce
Menu "download"
In main menu, choose download icon and press [ENTER] to enter to download menu.
Browse server
button use to switch among browse server, downloading list and downloaded list.
button use to select the servers.
[Yellow] button use to config the max number of allow download.
Thx To vicky
Download function introduce
Menu "download"
In main menu, choose download icon and press [ENTER] to enter to download menu.
Browse server
button use to switch among browse server, downloading list and downloaded list.
button use to select the servers.
[Yellow] button use to config the max number of allow download.
When you enter to “browse server/server list” menu, you will see a screen like below:
Press button to select connect icon, and press [ENTER] button to connect the server that you select.
Press
and [up/down] buttons to select add icon, and press [ENTER] button to enter to add server menu. And do next
Press
and [up/down] buttons to select delete icon, and press [ENTER] button to delete the server that you select
Press
and [up/down] buttons to select edit icon, and press [ENTER] button to edit the server that you select, and then do next.
When you enter to “browse server /file list ” menu, you will see a screen like below:
Press
button to select disconnect icon, and press [ENTER] button to disconnect the server.
Press
and [up/down] buttons to select refresh icon, and press [ENTER] button to refresh the file list.
Press
and [up/down] buttons to select download icon, and press [ENTER] button to enter to "information" menu, then do next and press button to confirm.
Press [info] button or press
and [up/down] buttons to select info icon, and press [ENTER] button to display the information of the file that highlight
How to Upgrade plugin by FTP
Upgrade Step:
1. Set your STB IP addr in system/Net setting menu
2.connect your PC to STB by LAN, now we only support LAN, do not support WLAN
3.Use ftp to telnet stb and copy plugin folder to /root
Upgrade Spark7111 by USB
Preparation:
1. We only recommend Kingston USB stick, we don’t support USB hard disk
2. Please make sure your USB stick only have 1 partition and the file system is
FAT32
3. Set default booting system to [spark].
Upgrade Step:
1. Make sure [C:/spark] is exist, if not, please create this folder.
2. copy [mImage] and [userfsub.img] to [C:/spark]
3. Connect USB stick to STB
4. Keep Pressing [OK] Button in Front Panel, then power on STB.
5. After 5 seconds, you will see [Forc] in LED, release [OK] button and press
Button.
6. if everything OK, You will see [U LD] shining in LED
7. if upgrade success, You will see [SUCC] and STB reboot automatically
8. If upgrade not finishes in 5 minutes, then there must be something wrong, please
check your configuration and re-try.
Upgrade Spark by TFTP
Since we have some restrictions and can not support all kinds of USB stick, we
provide another option (TFTP) to upgrade Enigma2/Spark.
Preparation:
1. Install TFTP tools [csicotftp11.rar] to your PC
2. Set your PC IP addr to [192.168.40.19]
3. connect your PC to STB by LAN, now we only support LAN, do not support WLAN
4. Set default booting system to [spark]
Upgrade Step:
1. copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
3. Keep Pressing [OK] Button in Front Panel, then power on STB.
4. After 5 seconds you will see [Forc] in LED, release [OK] button and press Button.
5. if everything OK, You will see [T LD] shining in LED and you will see some debug
information in TFTP Server, like
“ Mon Oct 25 14:02:36 2010: Sending 'mImage' file to 192.168.40.19 in binary mode
Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending 'userfsub.img' file to 192.168.40.19 in binary
mode
Mon Oct 25 14:03:33 2010: Successful.”
6. if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please
check your configuration and re-try.
How to Upgrade Uboot by RS232
Preparation:
1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer/File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
Upgrade Step:
1. Keep Pressing [OK] Button in Front Panel, then power on STB.
2. After 5 seconds you will see [Forc] in LED, release [OK] button and press Button.
3. If everything is ok, in STB you will see [LOAD] shinning in LED.
Spark7111 Upgrade Guide- Application
Functions Overview
In SPARK7111 Application, we can:
Upgrade Spark Dbase, System can recover if power down
Upgrade Spark Application, System can recover if power down
Upgrade Spark Application+Dbase, System can recover if power down
Upgrade Spark whole system (hidden),System can NOT recover if power down
3.2 Upgrade Option [Dbase]
Upgrade [Dbase] Option only includes channel list, Tp list, Satellite List.
Do not include User Preference Data (STB IP, default language etc)
3.3 Upgrade Option [App]
Upgrade [App] Option only includes Application code. Do not include Dbase or User
preference data.
3.4 Upgrade Option [App+Dbase]
Upgrade [App+Dbase] Option only includes Application code, Dbase and User
preference data.
3.5 Upgrade Option [System]
Upgrade [System] Option includes all spark system as well as uboot.
Upgrade Step:
1. Enter into Upgrade menu
2. Select Upgrade package
3. Press [EPG],[5], [2], [1],