CardSharing-X
» Receivers « => Dreambox Plugins => Dreambox files => » DREAMBOX ZONE « => Plugins E2 => Topic started by: labud on September 09, 2009, 07:34:43 PM
-
09.09.2009
enigma2-plugin-extensions-mediaplayer_2.6
-
19.09.2009
enigma2-plugin-extensions-mytube_2.6
enigma2-plugin-extensions-googlemaps_2.6
enigma2-plugin-extensions-graphmultiepg_2.6
enigma2-plugin-extensions-dvdplayer_2.6
-
20.09.2009
enigma2-plugin-extensions-googlemaps_2.6
enigma2-plugin-extensions-graphmultiepg_2.6
enigma2-plugin-extensions-dvdplayer_2.6
-
22.09.2009
enigma2-plugin-extensions-googlemaps_2.6
enigma2-plugin-extensions-graphmultiepg_2.6
enigma2-plugin-extensions-dvdplayer_2.6
-
28.10.2009
enigma2-plugin-extensions-mytube_2.6
enigma2-plugin-extensions-mediaplayer_2.6
enigma2-plugin-extensions-vlcplayer_2.6
enigma2-plugin-extensions-dvdplayer_2.6
-
xmltvimport_0.9.15-r18_
In this release, the following things must be resolved:
- Returns to standby after reboot (unpatched images)
- "Holes" in the EPG at midnight
There is an option added to the box or not to awaken from its deep sleep.
And of course the UTF-8 support in 0.9.14. This is the last OpenPLI Milo or the need (if you use PLI or Milo). OpenPLI users can plug it in anyway get the feed now
-
Dreambox enigma2-plugin-extensions by Others
21.11.2009
-
22.11.2009
enigma2-plugin-extensions-mytube_2.6
enigma2-plugin-extensions-googlemaps_2.6
enigma2-plugin-extensions-vlcplayer_2.6
enigma2-plugin-extensions-ac3lipsync_experimental-cvs
-
enigma2-plugin-extensions-dvdplayer_experimental
-
enigma2-plugin-extensions-dvdbackup
04 04 10
enigma2-plugin-extensions-dvdbackup
-
03 04 10
enigma2-plugin-extensions-dvdburn
-
28.04.2010
New Webinterface
-
enigma2-plugin-extensions-freeze
06-05-2010
freeze_0.5.1-r1
-
GP2 FlashBackup 1.4.2
enigma2-plugin-extensions-gp2flashbackup_1.4.2-11.05.2010_mipsel.ipk
am: 11.05.2010 18:46
Beschreibung:
1:1 backup vom flashimage
installation:
1. entpacken
2. per ftp zb nach /tmp kopieren
3. per dateimanager installieren
4. e2 neu starten
-
P2 Settings Manager 1.2
12.05.2010 14:01
enigma2-plugin-extensions-gp2settingsmanager_1.2-12.05.2010_mipsel.ipk
Beschreibung:
plugin um die einstellungen von e2 und gemini 2 zu sichern
installation:
1. entpacken
2. per ftp zb nach /tmp kopieren
3. per dateimanager installieren
4. e2 neu starten
-
enigma2-plugin-extensions-barryallen_5.1.24 mipsel.ipk
For DM 800-8000 by Gutemine
-
BarryAllen 5.1.30
Wally West for BA 5.1 is not yet available
And NO, BA 5.1 doesn't work with OE 1.5 Images in Flash, only OE 1.6 images are supported in Flash
If you have drivers >= 28.05.2010 in Flash Image pleasse upgrade to BA >=5.1.25 and update also the drivers in the BA Images or they will not boot anymore.As a temporary workaround you can disable the bootmanager until you did a driver udpate
You can do a driver update in telnet when bootet from flash to fix this:
ba.sh chroot imagename
ba.sh get_latest_driver
Please don't use the get latest loader on the 8000 until DMM has fixed this, or you will have to do a serial flash with DreamUP.
-
Dreamdroid 0.7 - beta
* FIX: Some minor bugs
* NEW: "Power Control"
* NEW: Tags & Locations for Timers and Movies (for movies only as a filter-option)
* NEW: Set Default Bouquet in ServiceList Menu
-
e2-plugin-extensions-cooltvguide_Coolman_V2.1
enigma2-plugin-extensions-cooltvguide_Coolman_V2.1.1_all
-
enigma2-plugin-extensions-cooltvguide_Coolman_V2.2.0_all.zip
enigma2-plugin-extensions-enhancedmoviecenter_1.1.0_all.ipk.zip
-
The VPS-plugin can determine whether a mission begins earlier or lasts longer than the timer is programmed. For this, the channels provide reliable data.
Features:
- Each timer can be enabled VPS
- Evaluation of the Running status of a program (not running, starts in a few seco$$$, pausing, running)
- Enter the VPS / PDC time possible
- Control-flow time (eg 10 minutes before the actual beginning of the recording captures the plugin to the monitoring of running status)
- Recordings can be completely controlled by the sender information, ie the programmed timer periods are not observed.
The channels provide reliable data? (Running status)
ARD and ZDF to provide for their shipments usually an accurate running status.
Sky delivers (for the Sky-owned channels and some non-transmitters) are often an accurate running status. Unlike ARD / ZDF, the (program) advertising before / after a show but as a "running" is specified.
The private stations adjust their status to not running when a program starts earlier or is coated. The VPS function should therefore not be turned on when recording from the private sector.
Exceptions seem to be TV DMAX and Servus.
What is VPS-time?
ARD and ZDF state in their EPG data, the VPS-time (PDC descriptor).
The VPS time should be the starting time published in magazines. ZDF is the time to on their website and Teletext.
be specified for manual timer programming, the VPS time when you turn the VPS function.
The VPS time can find the plugin, the event ID of the item and can then begin the evaluation of the Running status. When programming via the EPG must not VPS time be specified because, in the case already saved an event ID in the timer.
This looks for the plug after the VPS time, no name for the timer must be specified. The Name and Description fields are filled in by the plugin if a program of the VPS time is found.
What does complete control of broadcasting information?
When this feature is enabled (in the plugin settings and the timer!), Then the plugin can start recording only when the mission is stated as "running", and e$$$ the timer when the Running status to "not running "is set. In that case, the programmed timer periods are therefore not considered for inclusion. The start time of the timer should be programmed but still correct, since this time will be used for this, from when the plug begins to monitor the timer.
The disadvantage of the function is that the program möglicherwise or not taken wrong, when the station is giving incorrect information. This is even on ARD / ZDF irregular times the case.
If the function is not used, then considered the plugin the programmed start and end time and can start recording only if, sooner or run longer, never shorter.
Lead-Time Control
The plugin by default starts 10 minutes before the actual start of recording to monitor the running status.
If no free tuner is there, then tried the plugin on the current transponder / channel for information search. ARD will broadcast e.g. on their transponders and EPG information from ZDF and vice versa. However, it is expected with a slight delay.
For timers that are to be controlled by the sender information on the plugin if necessary in order for the lead time on the included transmitter.
Installation
The plugin is installed like any other.
To use the functions must be changed two files (/ usr/lib/enigma2/python/RecordTimer.py and / usr/lib/enigma2/python/Screens/TimerEntry.py). The files will be patched automatically by the plugin.
Enigma has to be restarted after installation. Maybe even twice.
Settings
The settings are the plugin menu - to find> VPS-plugin -> Settings -> System.
The VPS-plugin is to be regarded as experimental.
Thx to sftg
(http://www.demonisat.info/attachment.php?attachmentid=79059&d=1304858387)
(http://www.demonisat.info/attachment.php?attachmentid=79060&d=1304858387)
(http://www.demonisat.info/attachment.php?attachmentid=79061&d=1304858387)
Download (http://www.multiupload.com/XSYXFPLT8F)
-
Update Rev. 703
Enhanced Movie Center (EMC) V.3.0.0beta703
thx @Coolman, Betonme & Swiss-MAD
http://herosh.com/download/10876003/enigma2-plugin-extensions-enhancedmoviecenter_3.0.0beta703_mips32el.rar.html
-
enigma2-plugin-extensions-altshift_0.6_mipsel.rar
http://speedy.sh/XkT5a/enigma2-plugin-extensions-altshift-0.6-mipsel.rar.zip
-
enigma2-plugin-extensions-mediaportal_6.7.2_all.ipk
(http://speedy.sh/phqse/enigma2-plugin-extensions-mediaportal-6.7.2-all.ipk.zip)http://speedy.sh/phqse/enigma2-plugin-extensions-mediaportal-6.7.2-all.ipk.zip
[/URL]