CardSharing-X
» Receivers « => Dreambox Plugins => Dreambox files => » DREAMBOX ZONE « => Plugins E2 => Topic started by: antox on January 03, 2010, 10:21:48 PM
-
Just anticipating a few restrictions:
- Works only with new image for example Gemini 4.6
- Is 1 Version without much testing
- Works in Momemnt ONLY with 4pin PWM fan
With the new drivers, the temperature-control not work anymore. I wanted to be happy dealing with plugins and I have tried my hand at the fan control, because I miss her. I started at 0 without really know much about, and now in 2 days, creating something good working. I must say, it's fun, even if it was harder than I thought. If you want to even try, go ahead, but is still much to do until it is properly done. Would have it you only have to imagine times. Please do not push for full versions can have the next couple of days to come (when) you want.
What does it at the moment:
- Controlling a 4pin PWM fan
- Setting: minimum speed, maximum speed and system-start temperature (plugin configuration under !!!!!)
- Slow system without much CPU load
- Base temperature is the average of the 2 highest temperatures!
- Regulatory end temperature down to 55 ° C
Regard! Under the original system with temperature and fan settings:
Lüfter1 put on a full-voltage, or achieved at a value of at least the desired maximum speed (I will not change)
PWM-Lüfter1 a value can be preset from that is regulated
-
Version 1.1 [08.01.2010]
- Mehrsprachenunterstützung
- Lüfterwerte prüfen
- erweiterter Einstellbereich der Parameter
- Regel-Ende-Temperatur einstellbar
-
-fancontrol2_1.2-20100116-r1
r1 (17.01.2010)
- Italian Help File
-
FanControl2 plugin for E2
Version 1.3 [29.01.2010]
- Lüfter kann im Standby ausgeschaltet werden (einstellbar)
-
Version 1.5 (07.03.2010)
- Temperature Monitor (info button)
- Speed in the real field shifted (half speed)
Regard! min and max speeds needs to be set (half-value)
- Further improved Standbyfix
- Temperature Monitor (info-key)
- Speed shifted to the real range (half speed)
Attention! min and max speeds needs to be redefine (half-value)
- Further improved Standbyfix
joergm6
-
30.05.2010
- Now works on a DM500HD
- Bugfix: possible wrong order of the temperatures in the monitor
- Overheating protection: increase by up to 9C, max 64C now possible
in the first 10 minutes of overheating, the fan runs at minimum speed
- Release r1: Speed Settings 50 Steps; voltage control only to value = 5
-
Version 2.0
05.06.2010
-
Version 2.1 (06.07.2010)
Release r2: the reading of HDD temperature can be disabled(some watch from the HDD to Sleeping)
Thx Jörg
-
FanControl2 - Lüftersteuerung [11.10.2010]
-
Release r1 (17.11.) better detection of false voltage reduction
-
Release r1 (17.11.) better detection of false voltage reduction