CardSharing-X
» Receivers « => Other HDTV Receivers => » HDTV « => Topfield HD => Topic started by: antox on January 13, 2010, 10:03:40 PM
-
Multipart installer and Barry Allen for Topfield
-------------------------------------------------- -------
Barry Allen (BA) is a tool that allows multiple images on a USB stick or HDD-Box can be operated in parallel. Do as. Tar.gz file available.
The multipart Installer (MPI) is used on the PC to install BA and the images on the box and their management. Is in the database.
Basically, the procedure is as follows:
a) decision, where BA is to be installed. Only on the drive (HDD can be) completely intact, only on the HDD (it does not need a stick inserted in the operation), or stick and HDD
b) then either drive (partition) formatted with ext2 or ext3 and XBA denote a volume label, or a partition of the HDD (more specifically identified below), referred to as the XBA, or both. Can be done with MPI or by hand with telnet
c install) with MPI, the BA to the desired target (stick, HDD, both). Option Installs BA "in MPI. That is the BA partition.
d) with the MPI / the desired images on the BA copy partition. Options Install Images "for stand-alone images (safe option, slow) or" Install Images (1p) for images with the same kernel as in flash (boot faster)
e) with MPI to manage the images
We begin with the invocation of MPI.
IP Address: IP of the Box
Server IP: the IP of the PC
Telnet user: root, Password: your password has been assigned, if any, otherwise left blank
FTP user: root, Password: your password has been assigned, if any, otherwise left blank
Installed Images:
Topfield are installed in the image, there is at least the flash image
UFS_Images:
-
Barry Allen 0.66 für TF7700
Barry Allen (BA) is a tool that allows multiple images on a USB stick or d. ..
-
Barry Allen 0.74 for Topfield
-
Barry Allen 0.75 for Topfield
V0.75 Update und Olympia V2 rcS für 1P Images
so hier der Fix damit es mit Olympia V2 auch mit BA 1P Klappt
Fix für Olympia 1P Images mit BA 0.75
Hier gibt es ein Fix für den Einsatz von MPI in Verbindung mit 1P Images
die angehängte Datei ist nur für Olympia V1 und Olympia V2 Images im Flash !
mit den Fix könnte Ihr wieder nach der Installation mit MPI die Images vom Stick Starten, hab das Standby Problem der HDD nicht und den Geschwindigkeitsvorteil weil der Kernel im Flash liegt.
Es werden nur Olympia Image als 1P Unterstützt !
das File wird nur ins Flash Image Kopiert an folgende stelle
/etc/init.d
Voraussetzung ist auch die Installation vom BA 0.75 auf dem Stick !
http://www.multiupload.com/EAFHC0YVVJ
-
erneuter fix
New Barry Allen 0.76 for Topfield 7700
V0.76
- fix 1P Image mount RECORD /media/hdd
Fix for Olympia 1P Images with BA 0.76
There is a fix with 1P for the use of MPI in conjunction Images
The attached file is only for V1 and Olympia Olympia V2 Images in Flash!
with Fix You could return after the installation of MPI, the images from the stick start, have the standby problem, not the HDD and the speed advantage because the kernel is in Flash.
It is supported only Olympic image as 1p!
the file is only in the Flash Image Copies to the following places
/ etc / init.d
Another prerequisite is the installation of BA 0.76 on the stick!