Hi
I have just upgraded my receiver to a VT-1s and have a problem configuring my LNBs.
My setup with my old reciever was with 2 LNBs and Diseqc switch. 1st pointing to Astra2 (28.3 for my English channels)
and the 2nd pointing to Astra 1 (19.2) for the German channels.
Now with my new Vantage VT-1 I have replaced the 1st LNB with a twin LNB with the second output connected to the 2nd tuner in the VT-1
so that I can watch other English channels while recoding another. I am not so interestd in this feature with the German channels.
So on the VT-1 I have scanned both Satellites on Tuner 1 (the one which goes to the switch) and all the channels work fine.
I then scan Astra2 on tuner 2 (direct connection to the LNB) and all the channels are there and work fine.
So here is the problem:
After I set up tuner 2 I lose all the channels from Astra 1 on the high (11.70-12.75 GHz) band, The low band still works.
Only when I turn off the LNB power on Tuner 2 do they come back but of course then I can not get any channels from Tuner 2.
Any help would be appreciated