CardSharing-X
» Receivers « => VU+ => » HDTV « => VU+ Duo Addons, Tools and Other files => Topic started by: elcardinal74 on January 12, 2010, 11:54:27 PM
-
CCcam 2.1.3 for VU+DUO HD
-
MGcamd 1.35a For VU+ Duo
MGcamd 1.35a For VU+ Duo
-
Scam 3.58 For VU+ Duo
Scam 3.58 For VU+ Duo
-
Mbox For Images Original or experimental VU+ Duo Team
Mbox For Images Original or experimental VU+ Duo Team
-
OSCAM IPK 1414 with Alnos WebIF with configs
OSCAM IPK 1414 with Alnos WebIF with configs
OSCAM 1414 from the stream as a board with the beautiful WebIF IPK file.
The OSCAM is installed as OSCAM, not as oscam_0.99.4 or so (I do not like it when one of killall telnet in such nonsense must write off the back).
Furthermore, all the config files here are here, mind you, at least as an example (user and server)
Services and srvid lie with it.
WARNING!
That also means that if you installed the IPK are overwritten configs, so back up first if it already exists!
Gracias a encoutrer
-
For Images Original or experimental VU+ Duo Team
-
Oscam for VU+ Duo
0.99.4svn1481
Description:
Changeset #1481
Timestamp: 02/09/2010 09:48:11 PM
Author: alno
Message: WebIf:
- some code cleaning
-
Here is a first version of Newcs 1.6.7rc1
IMPORTANT! It is the same as for all card server, if CCcam starts first will never start newcs
Sci1 is to be established, so the lower Cardreader.Die newcs.xml located in / etc / tuxbox / config and must of course be adapted to your needs.
-
Oscam for VU+ Duo
oscam-0.99.4 svn1595
Current OSCAM for Vu + with support for *** Sky IT Videogard 2 map.
as always, old OSCAM then save and delete, and rename the new one goes.
/ usr/bin/oscam_0.99.4-1409 if they have in there
Thx RealMagic911
-
oscam_config
oscam_config -> ohne HD+ Box Key
-
cccam_config
cccam_config.rar
-
oscam 1801 mit WebIF
-
CCcamfor VTI Image
CCcam 2.0.11 for VTI Image V.0.6
Simply click on the box via FTP to / tmp directory
install over VTI Panel -> ipk / tar.gz installer
or via telnet to install:
ipkg install / tmp / *. ipk
-
21.03.2010
Oscam 0.99.4a-SB-svn1877 VU+Duo Webif Gold Edition
-
OScam + Mgcamd + 2 cards in readers.
OScam + Mgcamd + 2 cards in readers.
Temporarily not working link to the file .. wait until a moderator approves and puts on the upload, then correct the link far as to write something on the CI and administration sends it @ ... unless some moderator quickly coming to grips with the file.
OScam Mgcamd + 2 + cards in readers.
Many people are looking for a description of how the card readers urochomić + "anything", I put the following description.
I personally tested all of the VTI VTI 0.9 and 1.0, and operate without any problems card numbers and TNK + "need".
You will need:
Preferably the latest version of VTI (personally I prefer "clean" versions of yourself and add-ons and such tested)
FTP program to communicate with the decoder - I recommend Total Commander.
My configuration files (ie me .... I will only pozmieniałem for my needs) DOWNLOAD
Here we go:
We read carefully and with understanding, we do everything slowly and carefully. No such attribute for a file may cause that nothing will work. Read more and PRECISELY.
Files are deliberately not in the catalog as "gotowiec" everything comes out in the description why. I assume from the soft decoder is already uploaded and Total Commander is installed.
If you have installed the dekodeze oscam or mgcamd to remove it
the panel VTI - VTI Cam Center is to be neither oscam or mgcamd, the best order was empty.
Attributes files in Total Commander is broadcast by selecting the file (directory) or a context menu and choose Files - Change attributes ... and run in the bottom left corner of the attribute in our case, the 755th
The whole is written into the system:
Upper CYFRA + card reader
Lower TNK card reader
Do you work a different layout, or vice versa, ie the other card I do not know but I have not tested in the configuration files are relevant entries to identify the CAID so it must be possible to change the following accordingly.
1st Extract files
2nd Open Total Commander and then connect to the decoder.
3rd We begin to copy
- 1 directory in / etc / tuxbox / config and is broadcast to all three files artybut 755 in Total Commander
- 2 to the directory / usr / bin and all, we give two artybut 755 files in Total Commander
- 3 to the directory / usr / keys, and all three files we give artybut 755 in Total Commander
- 4 to the directory / usr / script and give artybut 755 in Total Commander. If we do not have a script directory, and it also create an attribute we give the 755th
4th in / usr / keys file is, it sets us priority.list piorytety - now uses the first card C + TNK and then at the end of CP.
5th in / usr / keys file is newcamd.list edit it if necessary sharingu settings, with more than a "link" Add another line pattern (the correct zedytowaniu sharingu must remove the # before Komeda # CWS or CWS is a ..... is to be CWS)
6th If everything did go to the panel VTI - VTI Cam Center. Should appear there, our entry "OScam & Mgcamd V1.0 Artur79 to" run it. You should see an hourglass or what have you got there as an indication of busy and after a few seconds a message from Cam starts, otherwise we check if the location of files and their attributes.
7th If everything went correctly after a few seconds (up to 15 seconds) you will get the picture and everything will work as it should.
And so dobrneliśmy to the end.
As discussed earlier do not know how the other cards but in the event of problems please write to PM to help.
Let me know how you went.
P.S.
At the end I wanted to thank all my thanks to the decoder works great.
Especially people without whom this description would have been no particularly
trzystan
and
scalpel
Thanks for your patience and curiosity.
-
oscam for vu+duo internal reader
-
oscam 2387 for VU+ DUO 4.8
oscam compiled with toolchain 4.8 for VU+ DUO untested
-
IncubusCamd v.0.99
29/04/2010, V0.99
- fixed a bug on support for multi newcamd lines
- fixed a bug on support for multi radegast lines
- fixed a bug on EMM manager using newcamd protocol
- some memory leak bugs fixed on cccam protocol and multi service
-
CCcam 2.1.4 for VU+ Duo
CCcam 2.1.3 for VU+ Duo
cccam_config.rar
-
Scam 3.60 mips for vu+
Hier mal als ipk da es nur eine Testversionen ist wegen sky italia card kommt sie nicht auf Feed
Einfach per FTP auf die Box ipk nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
oder per telnet installieren:
ipkg install /tmp/*.ipk
Thx Mixter-X
-
Scam 3.59
for Vu+ Duo 24-07-2010
ipk for VTI Image
-
Cccam-oscam for Vuo+Duo
cams-cccam.2.1.4.oscam.0.99.4_1.1-r0_mipsel
-
Cccam-oscam config for Vuo+Duo
Cccam-oscam config for Vuo+Duo
config-cccam.oscam_1.0-r0_mipsel for Vuo+Duo
-
Cccam config for Vuo+duo
enigma2-plugin-config-cccam_1.0-r0_mipse for Vuo+Duo
-
Cccam.2.1.4_1.0-r1 for Vuo+duo
-
VUCamd for VU+ Duo
-
Camd3 for VU+ Duo
-
Mgcamd 1.31 + Oscam 2967 Tring
This file is only for Tring on your VU +
On Duo top slot only.
This file is only for VTI Image
FTP to tmp and manual install.
-
VU_DUO-manual-emusetup.zip
setup manuale per E2 mipsel...
-
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Hi Leute
Vizcam 1.05 für die vu+ duo ab Vti-image v. 2.0
Hier mal zwei version der Vizcam für die Vu+Duo
mit und ohne Webif als ipk. Die config lieg unter var/keys/
nach den install.
Einfach per FTP auf die Box nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
gruss Tayrax
-
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
24.10.2010
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Spoiler
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Hi Leute
Vizcam 1.05 für die vu+ duo ab Vti-image v. 2.0
Hier mal zwei version der Vizcam für die Vu+Duo
mit und ohne Webif als ipk. Die config lieg unter var/keys/
nach den install.
Einfach per FTP auf die Box nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
gruss Tayrax
:link_ok:
enigma2-plugin-cams-vizcam.1.0.5_1.0-r1_mipsel.rar
[url]http://www.sendspace.com/file/vvckut[/url]
enigma2-plugin-cams-vizcam-web.1.0.5_1.0-r1_mipsel.rar
[url]http://www.sendspace.com/file/lro53c[/url]
-
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Hi Leute
Vizcam 1.05 für die vu+ duo ab Vti-image v. 2.0
Hier mal zwei version der Vizcam für die Vu+Duo
mit und ohne Webif als ipk. Die config lieg unter var/keys/
nach den install.
Einfach per FTP auf die Box nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
gruss Tayrax
-
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
24.10.2010
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Spoiler
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Hi Leute
Vizcam 1.05 für die vu+ duo ab Vti-image v. 2.0
Hier mal zwei version der Vizcam für die Vu+Duo
mit und ohne Webif als ipk. Die config lieg unter var/keys/
nach den install.
Einfach per FTP auf die Box nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
gruss Tayrax
:link_ok:
enigma2-plugin-cams-vizcam.1.0.5_1.0-r1_mipsel.rar
[url]http://www.sendspace.com/file/vvckut[/url]
enigma2-plugin-cams-vizcam-web.1.0.5_1.0-r1_mipsel.rar
[url]http://www.sendspace.com/file/lro53c[/url]
-
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Hi Leute
Vizcam 1.05 für die vu+ duo ab Vti-image v. 2.0
Hier mal zwei version der Vizcam für die Vu+Duo
mit und ohne Webif als ipk. Die config lieg unter var/keys/
nach den install.
Einfach per FTP auf die Box nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
gruss Tayrax
-
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
24.10.2010
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Spoiler
Vizcam 1.0.5 für die vu+ duo ab Vti-image v. 2.0
Hi Leute
Vizcam 1.05 für die vu+ duo ab Vti-image v. 2.0
Hier mal zwei version der Vizcam für die Vu+Duo
mit und ohne Webif als ipk. Die config lieg unter var/keys/
nach den install.
Einfach per FTP auf die Box nach /tmp kopieren
installieren per VTI Panel --> ipk/tar.gz Installer
gruss Tayrax
:link_ok:
enigma2-plugin-cams-vizcam.1.0.5_1.0-r1_mipsel.rar
[url]http://www.sendspace.com/file/vvckut[/url]
enigma2-plugin-cams-vizcam-web.1.0.5_1.0-r1_mipsel.rar
[url]http://www.sendspace.com/file/lro53c[/url]
-
11/11/2010
Code:
Mgcamd 1.35a for Vuo+ Black hole image with symbolic link fix embeded
-
Oscam/CCcam_HD+_V13 OK - Client/Server
1. CA Kartenleser S*k*y V13
2. CA Kartenleser HD+
> Eintrag der Server IP in die CCcam.cfg vom Client Vu+
192.168.x.NSFW
-
Scam 3.59
-
VU+OScam 7047 for mips-tuxbox-oe1.6
oscam-svn7047-mips-tuxbox
[URL=http://www.se$$$pace.pl/file/e1c42dfbea074e97598a893][COLOR=Lime]>> Download <<[/COLOR][/URL]
-
0scam-svn7107-mips-tuxbox-oe2.oscam-svn7107-mips-tuxbox-oe2.0-webif-Distribution.tar
oscam-svn7107-mips-tuxbox-oe2.0-webif-libusb-Distribution.tar
oscam-svn7107-mips-tuxbox-oe2.0-webif-libusb-ssl-Distribution.tar[URL=http://www.datafilehost.com/download-32e208b3.html][COLOR=Lime]>> Download <<[/COLOR][/URL]
-
Emu pack for VIX Image
[url]http://www.se$$$pace.pl/file/411cb1563fa1417ca23ea63[/url]
-
Oscam mips-tuxbox-oe2.0 for VU+ 15-10-2012
oscam-svn7724 for VU+
Quote:
Update 15.10.2012 - 16:29 [url]http://przeklej.net/down/485430927863558547175335961372025367215336fe751a833dcefb7.html[/url]
-
MGCamd 1.38 für Medi@link Ixuss One
Oscam Paket for Medi@link Ixuss One
current versions of Oscam for Medi @ link Ixuss One*from Oscam_1.20-rev-8012-8196-rev Oscam_1.20*
Who uses the HDF image then please use the "oscam" rename fields in "oscam-experimental".*
- The Oscam is located in the / usr / binWho uses the Image PBnigma then please use the "oscam" in "oscam_1.10" or "Oscam_1.20" rename fields.*
- The Oscam is located in the / usr / bin / cam
Rights set: 755*
Thanks to counter71 [url]http://przeklej.net/down/20766015292121235082034691484438170ba80a86ec8e7968560c77d.html[/url]