CardSharing-X
» Receivers « => VU+ => » HDTV « => VU+ Duo Addons, Tools and Other files => Topic started by: elcardinal74 on January 12, 2010, 11:38:34 PM
-
VU+DUO Manuel Deutsch Bedinungsanleitung
Enigma2
(http://portal.vuplus.com/wp-content/uploads/2010/01/MS750S-Leaflet_1.pdf-Adobe-Reader.bmp)
-
VU+DUO Netzwerkkonfig Allgemein Anleitung
-
Technische Daten für VU+ Duo Twin Linux HDTV Receiver PVR ready
-
Youtube vid showing Menu system of the image.
Vu+ Duo VTi Image (http://www.youtube.com/watch?v=OKu4vl69bkI&feature=player_embedded#)
-
Vu+ DUO linux based twin tuner pvr box
Looks like very interesting addition to hd boxes market.
There is claims that even dm8000 images and plugins work on it with some modifications. But in any case it has it is own original firmware plus VTI enigma2 custom image. And there is Pli test image out for it.
Anyway it should be running enigma2 and have cccam working on it. But we'll have to wait for more confirmation about cccam I guess.
Specs:
· Open-Source Linux OS (Enigma2)
· Broadcom Mips Prosessor
· Twin DVB-S2 Tuner (Silicon tuner)
· MPEG2/ H.264 Hardware decoding (DVB compatible)
· Alphanumeric VFD Display
· 2 x Common Interface Slots
· 2 x Smartcard-Reader (Conax Embedded)
· 10/100 Mbit Ethernet Interface
· 3 x USB2.0 (1x Front /2x Back)
· 1 x intern SATA (3,5inch bracket)
· 1 x E-SATA
· 1 x V.24/RS232
· HDMI connection V1.3
· 2 x Scart
· YPrPb
· 1 x S/PDIF for digital Audio(optisch)
· Extended EPG
. MHW EPG
. Fastscan plugin
· Plugin Support (JPEG,MP3,XVID...)
. Smartreader+ compatible
· Compatible with enigma2 plugins en settings
. Handy help button on the remote
· Different skins to choose from
· Videotext
· DiSEqC 1.0,1.1 en 1.2
Video:
Video resolution CCIR 601 (720 x 576 lines), 576p, 720p, 1080i
Video decoding MPEG-2, MPEG-4 compatible
Input data rate 2-45 MSymb/s
S/N >53 dB
Audio:
Decoding AC 3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate 32/44.1/48 kHz
S/N > 65 dB
Power usage:
< 25W (in use, horizontal / 400mA LNB power)
< 20W (in use, withoutLNB)
< 1W (Deep-Standby-Mode)
E2 läuft sehr Stabil auf den Vu+ Duo
Plug In´s die auf der Dream unter E2 laufen sollten alle gehen
HD Skins und SD Skin gehen
Avi und mkv laufen auch nur nicht DTS.
Cccam 2.1.3 und beide Kartenleser gehen auch. Getestete Karten
Sky nds ok
Sky S02 ok
ORF cw ok
MTV conax ok
HotRed Via ok
FreeX 1rd3t0 geht nicht
HD+ ok
SRG ok
Canaal Digitaal NL Mediaguard2 ok
Nova Irdeto2 ok
Smargo Reader geht zum Teil. Aber nicht mit allen Karten
Sky S02 ok mit cccam/newcs im Smargo
Externer USB Brenner wird auch erkannt. Filme Abspielen geht. Brennen geht jetzt auch
CI Module
AlphaCrypt Classic CI Modul Version 3.19 ok
easyTV Modul mit SW 1.19 ok
Alpha Crypt Light mit SW 3.19 ok
T-Rex Twin mit CHC-TRexV9 ok
Free X-TV Modul mit v0.80 geht nicht
DiabloCam 2 Professional geht nicht
thx sahinnn
-
A brief flash guide
Start
the Flash tool VU + Util Start
(http://img51.imageshack.us/img51/2415/1vuduopdfadobereader.png)
Select your COM Port
(http://img51.imageshack.us/img51/7767/2manualforvuutilpdfadob.png)
Deselect DHCP if you have not setup IP VU + duo
(http://img38.imageshack.us/img38/2842/vuplusdhcpon.jpg)
Then click on Connect button
(http://img43.imageshack.us/img43/3999/3manualforvuutilpdfadob.png)
Now you should see Serial port open Please turn on your box.
Do this with on power switch For Ethernet Flash Tick DHCP is set next Click on Set IP button and enter your IP.
(http://img697.imageshack.us/img697/4194/5manualforvuutilpdfadob.png)
Now youll see "IP Setup Success" in the VU + Util
(http://img51.imageshack.us/img51/7550/6manualforvuutilpdfadob.png)
Click open and select your NFI image file.
(http://img693.imageshack.us/img693/8618/7manualforvuutilpdfadob.png)
Press the flash Button
VU + Util then says "Reading file, please wait a moment ..."
(http://img693.imageshack.us/img693/4019/8manualforvuutilpdfadob.png)
Wait till you see flashing process is completed
(http://img193.imageshack.us/img193/914/9manualforvuutilpdfadob.png)
Now the update is finished and you can disconnect and then finish with a Click on the Exit button VU + Util.
Now power off then on.
thx ferret
-
Anleitung Barry Allen v5.0.26 by romeo-golf
-
Usage -of-VuUtil
Usage of VuUtil.exe (Windows Application)
-
Flashen über Seriell/LAN tutorial + VuUtil
Flash Tool für die VU+ Duo zum flashen über Seriell/LAN
Hier eine kleine Anleitung wie mal die Box über Seriell/LAN flasht.
...bitte lest diese Anleitung erst komplett durch bevor ihr anfangt.
-
Flashing Your VU+ Duo With A USB Stick
Easiest method is by USB make sure its formatted to fat32.
1. Download the USB version of any image.
2. Unrar and send the vuplus folder to your USB stick. Or in some cases you may need to make a folder named vuplus then inside that folder create another named duo. The send the boot, kernel and root file to the duo folder.
3. Turn off the power at the back of the VU rear of the VU+ you'll find the switch near the power cable. Insert your USB stick in the front USB port.
4. Turn back on the power.
On the front display you'll see reading USB device, this takes a while then you'll see erasing then programming.
It will then tell you to remove USB and reboot. Reboot with the power switch at the back
-
(http://www.bmradio.dk/images/vufornt.jpg)
Vu+ DUO linux based twin tuner pvr box
Looks like very interesting addition to hd boxes market.
There is claims that even dm8000 images and plugins work on it with some modifications. But in any case it has it is own original firmware plus VTI enigma2 custom image. And there is Pli test image out for it.
Anyway it should be running enigma2 and have cccam working on it. But we'll have to wait for more confirmation about cccam I guess.
Specs:
· Open-Source Linux OS (Enigma2)
· Broadcom Mips Prosessor
· Twin DVB-S2 Tuner (Silicon tuner)
· MPEG2/ H.264 Hardware decoding (DVB compatible)
· Alphanumeric VFD Display
· 2 x Common Interface Slots
· 2 x Smartcard-Reader (Conax Embedded)
· 10/100 Mbit Ethernet Interface
· 3 x USB2.0 (1x Front /2x Back)
· 1 x intern SATA (3,5inch bracket)
· 1 x E-SATA
· 1 x V.24/RS232
· HDMI connection V1.3
· 2 x Scart
· YPrPb
· 1 x S/PDIF for digital Audio(optisch)
· Extended EPG
. MHW EPG
. Fastscan plugin
· Plugin Support (JPEG,MP3,XVID...)
. Smartreader+ compatible
· Compatible with enigma2 plugins en settings
. Handy help button on the remote
· Different skins to choose from
· Videotext
· DiSEqC 1.0,1.1 en 1.2
Video:
Video resolution CCIR 601 (720 x 576 lines), 576p, 720p, 1080i
Video decoding MPEG-2, MPEG-4 compatible
Input data rate 2-45 MSymb/s
S/N >53 dB
Audio:
Decoding AC 3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate 32/44.1/48 kHz
S/N > 65 dB
Power usage:
< 25W (in use, horizontal / 400mA LNB power)
< 20W (in use, withoutLNB)
< 1W (Deep-Standby-Mode)
-
How TO View ITV HD Using Dreamset
1. Start Dreamset.
2. On the Dreamset taskbar click transfer and then read.
3. Now you see your settings in Dreamset. From the organize lists tab find ITV HD.
4. Highlight ITV HD right click and select service properties.
5.Now set the properties up as per the pic below. Just highlight and type directly into the service properties popup.
(http://i30.photobucket.com/albums/c321/Ferret156/dreamsetcr.png)
6. When finished select OK.
7. Add a folder to your desktop named setting.
8. On the Dreamset taskbar click save as and direct to your folder.
9. Now Dreamset taskbar click transfer and then write.
10 After Dreanset confirms the settings have transfered leave for a further 2 mins and then kill the power at the plug. This is important so enigma is forced to use your new settings.
11. Turn on the power and ITV HD should now work Video & Audio.
thx ferret
-
Flashing with USB stick
You can upgrade Vu+ Duo using USB memory stick, which is totally OS independent method.
================================================== =================
After builing the mbox-image, you can find following three files in the images folder.
1) mbox-image-bm750-xxxxxxxxxxxx.rootfs.jffs2
2) mbox-image-bm750-xxxxxxxxxxxx.vmlinux.gz
3) mbox-image-bm750-xxxxxxxxxxxx.boot.jffs2
Rename is as follows
1) root_cfe_auto.jffs2
2) kernel_cfe_auto.bin
3) boot_cfe_auto.jffs2
In USB memory stick, make \\vuplus\duo\ folder and copy the above 3 files to it.
(Make vuplus folder first and then make the subfolder duo )
Now USB memory stick has following 3 files at \\vuplus\duo\ folder.
1) \\vuplus\duo\root_cfe_auto.jffs2
2) \\vuplus\duo\kernel_cfe_auto.bin
3) \\vuplus\duo\boot_cfe_auto.jffs2
Insert USB Memory stick into the front USB socket and then Power Off / On the VuPlus.
After power-on, VuPlus Duo automatically start upgrade using the files in the USB memroy stick.
You can see the progress at the front VFD display.
After upgrade is finished, VFD will say that "Finished ...please reboot"
Then be sure to remove the USB, and then Power Off/On the VuPlus STB.
================================================== =================
__________________
-
How to Canal Digital with Fausto & newcamd
Canal Digitaal with Fausto & newcamd in VU + Duo
Condition:
- A PC
- Dbox2 / Dreambox / q-box One / VU + Duo with a functioning network
- Diablo Key bin
- Fausto 1:43
Method
1st Fausto 1.43 install
2nd Fausto start
3rd Language select (Settings-Language German.sil)
---> Settings -> Language -> German.sil click -> Open
4th Fausto Emulator (Welkugel enlarge)
5th current KEYS.BIN Shop (always best to copy the root directory Fausto, they can be found quickly)
---> Tools -> Emulator -> indicate there under the tab "Monitor" the appropriate path to KEYS.BIN
5th then open under the tabs "Server" -> "Configuration" FaustoServers.cfg
The contents of this file, I've cleared and re-fed with my own data:
Example:
N: 192.168.1.11 6001 0102030405060708091011121314 0622/000000 ()
U: dummy dummy
Go to Definition:
192.168.1.11 = IP address of the PC
6001 = one in the router shared TCP port
0622 = channel ID of C + NL
00000 = provider used by C + NL
U: dummy dummy = User & Pass indiscriminately used for server access to Fausto
7th CCcam.cfg at Dream Edit
Example:
N: 192.168.1.11 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Where the information is the same here as in the FaustoServers.cfg. The declaration of the 256 is optional. So you can bring in the newly created "virtual" card in a sharing network.
8th Launch Manager (Manager tab, press the Load, then click Start)
Among clients you can see whether you are connected, if it is not the same, just in hiss broadcasters can switch back and forth, it takes a few seconds.
Mil gracias a k98
-
Lüftersteuerung ohne Löten FAQ
FAQ: Wie man den Lüfter der VU+ noch leiser bekommt.
Ein großes Danke an Roland
-
Anleitung Barry Allen v5.0.26 by romeo-golf
-
Netzwerkfreigabe /VUDO / Dreambox / PC / Anleitung
Anleitung: Wie man mit einer Dreambox auf die VU+ zugreift.
Thx KEVINHRO
Network Share / VUDO / Dreambox / PC / Guide
Instructions: How to use a Dreambox to the VU + accesses.
Thx KEVINHRO
-
Install USB-DTT in Vu +
spain pdf
Mil gracias a Buscaruidos
-
A Tutorial for meoboot using Barry Allen that work smoothly . For those interested in meoboots for OE 1.6 images here is a short guide. Hope it will be of help.
1/ in flash (internal Flash) install AAF_HOT_SUMMER_V2_final version
Usb. in the usual manner using the front usb port.
2/ once installed. Switch off Vu+from back using the power button.
3/ Get a usb stick and format it using the hp format utiliy to FAT 32.
4/ While Vu+ is still switched off, insert the formatted usb stick in the
lowest usb port in the back of your Vu+.
5/ Power on Vu+ using again the power button in the back of Vu+.
6/ After a while the AAF_HOT_SUMMER_V2 will appear on your screen.
7/ Go to to Add on Manager and under plugins install Barry Allen Version
5.1.15.
8/ After completion of installation of Barry Allen, Use dcc296 and go to
/media/hdd/MB_Images
this is in case you donot have neither an internal nor external Hardrive
disks. If you have any one of them then Go to /media/USB/MB_Images.
9/ Once in in MB_Images , Ftp your meoboot image to MB_Images and
give it a CHMOD 755.
10/ Now go to Vu+ > plugins> Barry Allen click it and a screen will appear
go to
(Wizard for images at / MB_Images click it and a screen will appear,
Choose
( Extract nfi image from /MB_Images, Click it another screen appears ,
Here you will select the image which you transferred to MB_Images.
Choose the image and Rename it as you want and the press OK.
the process of extraction or installing will start. Upon completion you will
see the screen of the Flash image.
11/ Now go to plugins > Barry Allen click it> Choose (Wizrd For installed
images) click it> Choose (Select installed image for booting ) click it and
select your Meoboot image and press OK.
12/ Vu+ will reboot automatically and after several minutes your Meoboot
image will appear on screen.
You can repeat the same procedure to install as many images as you like
provided all images are compatabilwith the Flash image,. In this case all
images should be the new versions of VTi 2/Gigant 2 etc. They all must
have OE 1.6 otherwise the system wont work.
Important Notice: Open Pli images do not work with this system because
of O.E compatibility issues.
__________________
GSFTeam
Rispondi quotando
-
Vu+ nützlichen Tipps von nad218thx
-
Vu+ nützlichen Tipps von nad218thx
-
Vu+ nützlichen Tipps von nad218thx
-
VU+DUO Flashen per USB Stick Anleitung
hier ein anleitung vu+duo Flashen per usb stick.