CardSharing-X
» Receivers « => OTHER SAT-RECEIVERS => » Other Receivers « => X-Cruiser => Topic started by: eniz9 on December 29, 2009, 04:47:40 PM
-
New Firmware 525 1rd3t0 5,7 KAPPA card Supported
*DigiTV OK
*Rai OK
*Mediatech OK
*MTech ok
*TVGlobo OK
*Hustler OK
*Biss ok Full OK 29-12-09
-
G2-602-1A527D
V-PRO 5000 USB2 PVR XDSR26x-ver225.
*version 225 fixed usals function g2-602-2c526.
V-PRO 5000+ PLUS USB2 PVR
-
NEW SOFTWARE 9.94 1rd3t0 Kappa Card Fixed
-
New software for Xcruiser XDSR250PVR & XDSR 250HDMI with this software you can watch Ab-sat Bis package on hootbird
channel list
(http://img708.imageshack.us/img708/7779/bisabsatchannellist.jpg)
NOTE:- Do not update your receiver with wrong model software it can damage your Box Be carefull while selecting Software
-
Follow the process as described below;
* This plugin (plugin_27AUG2010) can be working only with IRD version s/w v.1.08.37 or later.
So, you need to download the IRD v.1.08.37 version s/w before downloading plugin.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the PVR during Live Watching.
4. When download pop-up window appears, please find "plugin" folder with Right/Left button of RCU.
5. Download the "plugin" to the PVR.
6. Download completes, the PVR will be rebooted automatically.
Go to Menu > Utilities > PlugIn, you can see the menu as below;
1. MCAS: you can set the State of Mcas "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto" and set State to "started", MCAS will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
2. Keditor: you can edit key.
3. Xcamclient: you can set the State of C/S "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto"and set State to "started", C/S will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
4. XcamConfigure: you can input and edit c/s information.
Once you input server URL, it will be displayed as ***** for protection, and you can see it by pressing 1407.
5. ExSIM: You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4.
Ethernet module is for KNJ.
6. Kain2r: This is s/w module for KNJ, you can use it just like cc***.
1. Select Kain2r.
2. Start it with Green button.
3. After Started, press OK button.
4. Pop-up menu will appear.
5. Select at the bottom of the Pop-up menu.
6. Select Server Address and press 1407.
7. Input www.dragonlink.biz (http://www.dragonlink.biz) and press enter in the on-screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on-screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.
** From this plugin_27AUG2010, you don't need to stop other menus to use a specific one.
(For example, you can keep started for Mcas during using Xcamclient)
------------------------
You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data within Home Network.
Mcas - server side
1. make started by Green button and then press OK button
2. you will see ¡®smart card 2¡¯ and ¡®server setting¡¯ menu if your receiver has smart card inside
3. enter ¡®server setting¡¯ menu by press OK
4.¡®port¡¯ : don¡¯t need to change port and it is better to leave as default, but you can change it as 5 digits if you need and it is safe.
5.¡®user setting¡¯ : you can input user id and password to allow connecting to server receiver from client which is listed inside user setting menu.
6.¡®auto start¡¯ : you can change as ¡®on¡¯ if you want to start this server menu when you start Mcas plugin
7. login confirmation : you can change as ¡®on¡¯ if you want to check user id and password from client receiver
Mclient - client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then input the IP address of server receiver (no need //)
4. lastly, go to the ¡®connect to server¡¯ and press ¡®OK¡¯ button
-
Biss Key For Ideman Azerbaican On Hotbird Added
This Channel Show Live Foot Ball
Software For Both XDSR 250PVR & XDSR 250HDMI
Be careful While Selecting Software one mistake can Damage Your BOX
-
Software for XDSR PRO 2.76 twin Protocol Added for Sat Sharing + Arabic & Persian Language Added
Menu > STB Security > Password 3333 Must be Activated
up_2900_Ver276.zip (http://www.multiupload.com/4L94PCP0IT)
-
Software for XDSR PRO 2.76 twin Protocol Added for Sat Sharing + Arabic & Persian Language Added
Menu > STB Security > Password 3333 Must be Activated
up_2900_Ver276.zip (http://www.multiupload.com/4L94PCP0IT)
-
Software for XDSR PRO 2.76 twin Protocol Added for Sat Sharing + Arabic & Persian Language Added
Menu > STB Security > Password 3333 Must be Activated
up_2900_Ver276.zip (http://www.multiupload.com/4L94PCP0IT)