Manual SBox 0.0.4.7 V4 + ROM 180 (Nagra3)
The first and most recommended is the MAZ 3.0, install the latest version of Sbox, in this case is version 0.4.7 V4
Once installed, sailed up to FTP program:
/ PLUGINS / OpenXCAS / SboxCAS /
Inside you will find:
openxcas.conf
sbox.conf
sbox.sigma
users.sbox
Edit the first and you put this:[module]
name = SboxCAS
daemon = sbox.sigma /PLUGINS/OpenXCAS/SboxCAS/sbox.conf
version = 0.0.4.7 #2
xcasapi = true
INFO = /tmp/ecm.info
REFRESH = 2
Edit the second (sbox.conf) and you put this:
[main]
server_only=0 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath= users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=27000 # newcamd port
mhz=318 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER
#Nagra2/3 Example
[xxxxx] # nagra2 camid (4 bytes)
rsa= xxxxxxx # rsa "n" from this card (like newcs)
boxkey= xxxxxxx # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath=/var/keys/port.list # path from port.list
reboot
there are more settings newcamd etc.
but this is the easier and faster for your card Digital + Nagra3
Thx NaGaSis