1) Uncompress file attachment named "lib_modules_261251etc_kernel_driver_usb_ serial.zip"
2) Copy the three files (Do not copy the whole folder, copy only the files in it) into the subfolder "serial" of your dreambox. That folder you will find the following the following path:
/ lib/modules/2.6.12-5.1-brcmstb-dm800/kernel/drivers/usb/serial (if inside the folder "USB" can not find the folder "serial", create)
3) Change the attributes for the three files, giving 755
4) restart dream

At this point the USB drivers are installed and then you can install new versions of Barryallen!

To install the Smargo, download the file named "smargo_ftdsio and pl2303 dream 800 module.zip and unzip it, done that, it only takes three simple steps:

1) copy the folder / tmp dream of the two files ipk ftdsio and pl2303
and proceed with the installation manual Addons> ipk or via telnet
2) change the bootup files (contained in the etc / init.b) append the following string:

echo 90> / proc / progress
modprobe ftdi_sio

After editing the file save it and give permissions (755)

3) add this string to your file CCcam.cfg:

SERIAL READER: / dev/usb/tts/0 SmartReader +

Now you can connect the USB port of your Smargo dream, and once restarted it Smargo will be another card reader at your disposal.