Manual update firmware DM 500HD via mini-usb

Upgrading the software of DM 500HD is like the rest of Dreams via RS232, but the mini-USB port.

Items required:
1) mini-usb male to male USB

2) Universal DreamUP 1.3.3.5

Process:

1)Unplugged the Dream 500HD

2)We connect the cable for its part mini-usb port "Service" of the Dream 500HD and the USB to a USB port on your PC.

3)Just plug it in, the PC will detect new hardware connected to the system:

4)The PC will ask the driver for this new component.
5)Open the Windows Device Manager, and you will see the new hardware installed, will appear as COM port (even a USB cable). In the following example, is recognized as the cable into the port COM4.

6)We opened the universal DreamUP 1.3.3.5 (for example) and select the update COM port (like any other model of Dreambox). At this point, we choose the COM port that we appeared in the previous step (COM4 in this example).

7)Press the Connect button the DreamUP universal and we can turn
the Dream 500HD to start loading new firmware.