1. get the latest img file
2. put it on your memory stick
3. insert the memory stick in the USB slot on the receiver.
4. Turn on the receiver via the RPS
5. Using the remote turn on the receiver
6. Select your pach(file)
7. Scan through the menu and find 'USB' - push OK on the remote
8. Find the img file on the memory stick by scrolling up or down using the arrow buttons on the remote.
9. When you find the file - press ok and follow the prompts
10. after the receiver reboots - do a factory default
11. select your language
12. set your TV aspect ratio (optional)
13. set your local time
14. set up your sats (sat / Diseqc / port)
15. scan your sats


Good Luck



PS: Do not forget to extract file

hi thanks very much for that info and i managed to put the latest firmware in the box and all is well thanks to you for providing me the info
please one more thing if possible how do i open cccam and using ftp can you help me one more time
thanks a lot for your time
tony

hi receiver up to date with cccam it is opened in receiver please i need the following if possible below
hostname
port
username
password
please can these be send to me
thanks foe everything very helpfull
tony