CCcam SoftCam Control (Latest)

[antox]

Code Select Expand

Quote:
This software is used to perform the following steps:

1) occurs in cyclical Decoder on one or more C-LINE on CardSharing Server. Line C-Line to be tested is inserted and automatically sends the file in this CCcam.cfg Decoder.

2) upload the file CCcam.cfg Decoder and display the content on a text window

3) edit the rows and / or data in the file CCcam.cfg

4) create a new file on your PC CCcam.cfg or send the new file to CCcam.cfg Decoder

5) load from the file SoftCam.Key Decoder and display the content on a text window

6) edit the rows and / or data in the file SoftCam.Key

7) Create a new file on your PC SoftCam.Key or send the new file to SoftCam.Key Decoder

8) upload the file constant.cw Decoder and display the content on a text window

9) to edit the rows and / or data in the file constant.cw

10) create a new file on your PC constant.cw or send the new file to constant.cw Decoder

11) to extract and compose the lines from lines N-LINE data CardSharing Server Newcamd protocol

The communication between the software, the PC and the decoder is done via FTP.

Connection is via the network cable connected between the LAN port of the decoder and the router or the PC.

If this is the first start the software needed to make settings for the FTP communication between the decoder and the router or PC.

 

Code Select Expand

http://www.sendspace.com/file/lkuh4k

[antox]

DreamBox CCcam SoftCam Control 04.12.2009

Code Select Expand

http://www.mediafire.com/file/emdhmgkyvmg/ZL_DB_CCcam_SoftCam_Control.rar

Code Select Expand

v1.0

04.12.09

This software is used to perform the following steps:

1) occurs in cyclical Decoder on one or more C-LINE on CardSharing Server. Line C-Line to be tested is inserted and automatically sends the file in this CCcam.cfg Decoder.

2) upload the file CCcam.cfg Decoder and display the content on a text window

3) edit the rows and / or data in the file CCcam.cfg

4) create a new file on your PC CCcam.cfg or send the new file to CCcam.cfg Decoder

5) load from the file SoftCam.Key Decoder and display the content on a text window

6) edit the rows and / or data in the file SoftCam.Key

7) Create a new file on your PC SoftCam.Key or send the new file to SoftCam.Key Decoder

8) upload the file constant.cw Decoder and display the content on a text window

9) to edit the rows and / or data in the file constant.cw

10) create a new file on your PC constant.cw or send the new file to constant.cw Decoder

11) to extract and compose the lines from lines N-LINE data CardSharing Server Newcamd protocol

The communication between the software, the PC and the decoder is done via FTP.

Connection is via the network cable connected between the LAN port of the decoder and the router or the PC.

If this is the first start the software needed to make settings for the FTP communication between the decoder and the router or PC.

Thx ZioLibero

DreamBox CCcam SoftCam Control version 1.1

16.12.2009

Code Select Expand

http://www.mediafire.com/file/gzdmmgitwmz/ZL_DB_CCcam_SoftCam_Control(2).rar

DreamBox CCcam SoftCam Control

23.12.2009

Code Select Expand

http://www.mediafire.com/file/yyyyvtmnwiz/ZL_DB_CCcam_SoftCam_Control_v1.2.rar

[antox]

DreamBox CCcam SoftCam Control v 2.1

DreamBox CCcam SoftCam Control

Update v2.0

New version v2.0 - 12 Feb. 2010

If you have installed the old version, you can extract the new RAR file and copy and overwrithe in the folder only DB_CCcam_&_SoftCam_Control.exe and Guida.chm files.

Thanks ZL

DreamBox CCcam SoftCam Control v 2.1
15.02.2010

This software is used to perform the following steps:

1) occurs in cyclical Decoder on one or more C-LINE on CardSharing Server. Line C-Line to be tested is inserted and automatically sends the file in this CCcam.cfg Decoder.

2) upload the file CCcam.cfg Decoder and display the content on a text window

3) edit the rows and / or data in the file CCcam.cfg

4) create a new file on your PC CCcam.cfg or send the new file to CCcam.cfg Decoder

5) load from the file SoftCam.Key Decoder and display the content on a text window

6) edit the rows and / or data in the file SoftCam.Key

7) Create a new file on your PC SoftCam.Key or send the new file to SoftCam.Key Decoder

upload the file constant.cw Decoder and display the content on a text window

9) to edit the rows and / or data in the file constant.cw

10) create a new file on your PC constant.cw or send the new file to constant.cw Decoder

11) to extract and compose the lines from lines N-LINE data CardSharing Server Newcamd protocol

The communication between the software, the PC and the decoder is done via FTP.

Connection is via the network cable connected between the LAN port of the decoder and the router or the PC.

If this is the first start the software needed to make settings for the FTP communication between the decoder and the router or PC

[stafa]

CCcam SoftCam Control v 2.2
20-02-10

[antox]

CCcam SoftCam Control v 2.5



v2.5 Auto-install - Utility for various operations with C-LINE, N-LINE, CCcam.cfg file, files, various Keys, etc..

Adding section BISS / DCW


Thx ZioLibero