Hivion HD Firmware

Started by antox, February 08, 2010, 02:35:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 3
User actions

antox

February 08, 2010, 02:35:18 PM
Code Select
TWIN HD PVR


HD_TWIN


08-02-2010
Code Select
HD-9090X Ultima


HD USB-PVR


08-02-2010
Code Select
HD USB-PVR L


[code]HD USB-PVR L


08-02-2010[/code]

antox

#1
February 18, 2010, 07:52:18 PM
QuoteTWIN HD PVR
   

HD_TWIN
   

17-02-2010
QuoteHD-9090X Ultima
   

HD USB-PVR
   

17-02-2010
QuoteHD USB-PVR L
   

HD USB-PVR L
   

17-02-2010
warning origi VS clone

antox

#2
February 25, 2010, 09:10:54 PM
QuoteTWIN HD PVR
   

HD_TWIN
   

25-02-2010

QuoteHD-9090X Ultima
   

HD USB-PVR
   

25-02-2010

QuoteHD USB-PVR L
   

HD USB-PVR L
   

25-02-2010

antox

#3
March 19, 2010, 06:30:40 PM
QuoteTWIN HD PVR
HD_TWIN
19-03-2010

QuoteHD-9090X Ultima
HD USB-PVR
19-03-2010

QuoteHD USB-PVR L
HD USB-PVR L
19-03-2010

antox

#4
March 22, 2010, 12:23:15 PM
Code Select
HD USB-PVR L
HD USB-PVR L
22-03-2010
Code Select
TWIN HD PVR
HD_TWIN

antox

#5
March 31, 2010, 07:10:40 PM
TWIN HD PVR
QuoteHD_TWIN
31-03-2010
HD-9090X Ultima
QuoteHD USB-PVR
31-03-2010
HD USB-PVR L
QuoteHD USB-PVR L
31-03-2010

antox

#6
April 14, 2010, 12:12:58 PM
Firmware for Hivion HD Firmware
TWIN HD PVR
   

QuoteHD_TWIN
14-04-2010
9696/9797 PVR HDMI
Quote29E3USB_CAS_HDMI

antox

#7
April 23, 2010, 12:30:59 PM
23-04-2010
9696/9797 PVR HDMI
29E3USB_CAS_HDMI
   
TWIN HD PVR
HD_TWIN

HD-9090X Ultima
HD USB-PVR

HD USB-PVR L
HD USB-PVR L
Rai ok - Digitv au - MTech ok - Orf ok

labud

#8
April 25, 2010, 06:01:33 AM
Firmware For:

9595X PVR
9696X PVR
PVR 9090X
PVR 9191X
5151X PVR
-----------------------------------------------








UNAUTHORIZED DECODING OF ENCRYPTED SIGNALS FROM EITHER DOMESTIC OR FOREIGN PROVIDERS IS AGAINST THE LAW !!!
INFORMATION CONTAINED IN MY POSTS ["C/P FROM ANOTHER SITE"] ARE FOR LEARNING AND EDUCATIONAL PURPOSES ONLY !!!
PLEASE, DO NOT SEND ME PRIVATE MESSAGES WITH TECHNICAL QUESTIONS, USE FORUM FOR IT !!!

antox

#9
May 18, 2010, 04:47:50 PM
HiVION HD18-05-2010

TWIN HD PVR
HD_TWIN
   

HD-9090X Ultima
HD USB-PVR
   
HD USB-PVR L
HD USB-PVR L
Rai_DigitvAU_MTech_Orf_Seca2_Biss_T
QuoteSSSP â€" Simple Serial Sharing Protocol
=====================================

This Protocol defines the communication between a DVB Box and a gbox by using a RS232(serial/com/tty port) with only 4 commands to implement.


RS232 communication settings
============================
115200 8N1 (115200 Baud, 8 data bits, no parity, 1 stop bit)
To activate add in the gbox_cfg R: { 01 } for com1, or R: { 02 } for com2
W: and V: should be deactivated 00 00
When developing Software you can activate thers232 debug messages by adding
10 to the R: parameter, a example for com1 would be R: { 11 }


Format of data
==============
AB CD EF GH ....

AB = Command
CDEF = length of the data following
GH ... = data

Total length is CDEF + 3 (1 byte command + 2 bytes len)


Command 0x means from STB to gbox
Command Fx means from gbox to STB


SEND PMT = 01 (send PMT to gbox)
--------------------------------
01 xx xx yy yy zz zz zz zz data ....
xx = Len
yy = SID ( byte 2 and bytes 3 from the PMT)
zz = PMT CRC32 (last 4 bytes in the PMT)
Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
Provider is only used in Seca and Viaccess, in other systems put 00 00 00
For Seca use 00 xx yy and for **acess xx yy z0

On each channel change the DVB box must send the PMT first, on FTA Channels please send: 01 00 06 yy yy zz zz zz zz


SEND ECM = 03 (send ECM to gbox)
--------------------------------
03 xx xx yy yy ecm_data ....
xx = len
yy = pid

Note: Please send every ecm only once, do not send the same ecm multiple times.


REQUESTING PIDS DATA = F1 (receive ECM pid list )
-------------------------------------------------
F1 xx xx pid1 pid2 pid3 ....
xx = Len
pidx = 2 bytes for each pid

Please send me ECM data from these pids only, close all other already open.


CW RETURN = F2 (receive ControlWords)
-------------------------------------
F2 00 10 cw1 (8 bytes) cw2 (8 bytes)


Command flow on a channel change
================================
1. DVB box sends PMT with command 01 on a channel change
2. gbox sends pid list of the ecm's it can handle with command F1
3. DVB box sends ECM's (from all pids in the pid list) with command 03
4. gbox sends CW's with command F2
5. As soon the gbox has success in decoding a ecm it sends again a F1 command
with one pid only, the DVB box should close then all other pids and from
now on send only ecm data from that pid.

After this command 03 and F2 will be repeated until a channel change.

On the next channel change the DVB should close all open pids and repeat the
above procedure.



//-----------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------
Advanced protocol

cmd 01 and 03 are not enough for multi-channel.

so added



Advanced SSSP support = 04 (send cmd to gbox)
--------------------------------
04 xx xx yy yy
xx = Len
yy = check value ( returned )



Reply Advanced SSSP support = F4
-------------------------------------------------
F4 xx xx yy yy
xx = Len
yy = 2 bytes, returned from CMD 04







SEND PMT = 05 (send PMT to gbox)
--------------------------------
05 xx xx aa yy yy zz zz zz zz data ....
xx = Len
aa = which channel, less than 10,  example 00=viewing channel, 01=pip channel, 02= timeshift, 03=recording 1, 04=recording 2,.....
yy = SID ( byte 5 and bytes 6 from the PMT)
zz = PMT CRC32 (last 4 bytes in the PMT)
Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
Provider is only used in Seca and Viaccess, in other systems put 00 00 00
For Seca use 00 xx yy and for **acess xx yy z0

On each channel change the DVB box must send the PMT first, on FTA Channels please send: 05 00 07 aa yy yy zz zz zz zz


REQUESTING PIDS DATA = F5 (receive ECM pid list )
-------------------------------------------------
F1 xx xx aa pid1 pid2 pid3 ....
xx = Len
aa = from cmd 05
pidx = 2 bytes for each pid

Please send me ECM data from these pids only, close all other already open.





SEND ECM = 06 (send ECM to gbox)
--------------------------------
03 xx xx aa bb bb bb bb yy yy ecm_data ....
xx = len
aa = which channel, less than 10,  example 00=viewing channel, 01=pip channel, 02= timeshift, 03=recording 1, 04=recording 2,.....
bb = 4bytes, tag, returned from cmd F6
yy = pid

Note: Please send every ecm only once, do not send the same ecm multiple times.


CW RETURN = F6 (receive ControlWords)
-------------------------------------
F2 00 15 aa bb bb bb bb cw1 (8 bytes) cw2 (8 bytes)
aa = which channel from cmd 06
bb = tag 4bytes from cmd 06

antox

#10
May 27, 2010, 05:32:20 PM
TWIN HD PVR HD_TWIN
   
   27-05-2010

HD-9090X Ultima HD USB-PVR
   
HD USB-PVR L HD USB-PVR L
   

SSSP â€" Simple Serial Sharing Protocol
=====================================

antox

#11
May 27, 2010, 05:38:17 PM
SSSP CCCAM NEWCS
   

sssp_cccam_newcs
   

27-05-2010
SSSP â€" Simple Serial Sharing Protocol
=====================================
Code Select
This Protocol defines the communication between a DVB Box and a gbox by using a RS232(serial/com/tty port) with only 4 commands to implement.


RS232 communication settings
============================
115200 8N1 (115200 Baud, 8 data bits, no parity, 1 stop bit)
To activate add in the gbox_cfg R: { 01 } for com1, or R: { 02 } for com2
W: and V: should be deactivated 00 00
When developing Software you can activate thers232 debug messages by adding
10 to the R: parameter, a example for com1 would be R: { 11 }


Format of data
==============
AB CD EF GH ....

AB = Command
CDEF = length of the data following
GH ... = data

Total length is CDEF + 3 (1 byte command + 2 bytes len)


Command 0x means from STB to gbox
Command Fx means from gbox to STB


SEND PMT = 01 (send PMT to gbox)
--------------------------------
01 xx xx yy yy zz zz zz zz data ....
xx = Len
yy = SID ( byte 2 and bytes 3 from the PMT)
zz = PMT CRC32 (last 4 bytes in the PMT)
Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
Provider is only used in Seca and Viaccess, in other systems put 00 00 00
For Seca use 00 xx yy and for **acess xx yy z0

On each channel change the DVB box must send the PMT first, on FTA Channels please send: 01 00 06 yy yy zz zz zz zz


SEND ECM = 03 (send ECM to gbox)
--------------------------------
03 xx xx yy yy ecm_data ....
xx = len
yy = pid

Note: Please send every ecm only once, do not send the same ecm multiple times.


REQUESTING PIDS DATA = F1 (receive ECM pid list )
-------------------------------------------------
F1 xx xx pid1 pid2 pid3 ....
xx = Len
pidx = 2 bytes for each pid

Please send me ECM data from these pids only, close all other already open.


CW RETURN = F2 (receive ControlWords)
-------------------------------------
F2 00 10 cw1 (8 bytes) cw2 (8 bytes)


Command flow on a channel change
================================
1. DVB box sends PMT with command 01 on a channel change
2. gbox sends pid list of the ecm's it can handle with command F1
3. DVB box sends ECM's (from all pids in the pid list) with command 03
4. gbox sends CW's with command F2
5. As soon the gbox has success in decoding a ecm it sends again a F1 command
with one pid only, the DVB box should close then all other pids and from
now on send only ecm data from that pid.

After this command 03 and F2 will be repeated until a channel change.

On the next channel change the DVB should close all open pids and repeat the
above procedure.



//-----------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------
Advanced protocol

cmd 01 and 03 are not enough for multi-channel.

so added



Advanced SSSP support = 04 (send cmd to gbox)
--------------------------------
04 xx xx yy yy
xx = Len
yy = check value ( returned )



Reply Advanced SSSP support = F4
-------------------------------------------------
F4 xx xx yy yy
xx = Len
yy = 2 bytes, returned from CMD 04







SEND PMT = 05 (send PMT to gbox)
--------------------------------
05 xx xx aa yy yy zz zz zz zz data ....
xx = Len
aa = which channel, less than 10,  example 00=viewing channel, 01=pip channel, 02= timeshift, 03=recording 1, 04=recording 2,.....
yy = SID ( byte 5 and bytes 6 from the PMT)
zz = PMT CRC32 (last 4 bytes in the PMT)
Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
Provider is only used in Seca and Viaccess, in other systems put 00 00 00
For Seca use 00 xx yy and for **acess xx yy z0

On each channel change the DVB box must send the PMT first, on FTA Channels please send: 05 00 07 aa yy yy zz zz zz zz


REQUESTING PIDS DATA = F5 (receive ECM pid list )
-------------------------------------------------
F1 xx xx aa pid1 pid2 pid3 ....
xx = Len
aa = from cmd 05
pidx = 2 bytes for each pid

Please send me ECM data from these pids only, close all other already open.





SEND ECM = 06 (send ECM to gbox)
--------------------------------
03 xx xx aa bb bb bb bb yy yy ecm_data ....
xx = len
aa = which channel, less than 10,  example 00=viewing channel, 01=pip channel, 02= timeshift, 03=recording 1, 04=recording 2,.....
bb = 4bytes, tag, returned from cmd F6
yy = pid

Note: Please send every ecm only once, do not send the same ecm multiple times.


CW RETURN = F6 (receive ControlWords)
-------------------------------------
F2 00 15 aa bb bb bb bb cw1 (8 bytes) cw2 (8 bytes)
aa = which channel from cmd 06
bb = tag 4bytes from cmd 06

antox

#12
June 22, 2010, 10:21:20 AM
TWIN HD PVR
   HD_TWIN
   

22-06-2010

HD-9090X Ultima
   HD USB-PVR
   
HD USB-PVR L
   HD USB-PVR L
   

SSSP â€" Simple Serial Sharing Protocol
softcam bis_canalsat

antox

#13
July 01, 2010, 12:24:01 PM
HD 9696 PVR XviD
   
Quote180Z4USB_L


01-07-2010

TWIN HD PVR
   
QuoteHD_TWIN

HD-9090X Ultima
   
QuoteHD USB-PVR

HD USB-PVR L
QuoteHD USB-PVR L

SSSP â€" Simple Serial Sharing Protocol
=====================================
Quotesoftcam Canalsat.Bis

antox

#14
July 12, 2010, 01:33:53 PM
TWIN HD PVR
   HD_TWIN

SSSP â€" Simple Serial Sharing Protocol
=====================================   



HD-9090X Ultima
   HD USB-PVR



HD USB-PVR L
   HD USB-PVR L
   

12-07-2010
hIvion HD-softwares
Print
Go Up Pages1 2 3
User actions