SatHawk / Solomend HD PVR 800

[ibcus]

Are you using a null modem cable or just a normal serial cable?

[calisto]

Am using a null modem cable m8, tried two different cables as well with no luck, pulling what is left of my hair out.

[irfy]

Has anyone noticed that some S*y Sports channels make the box reboot then get stuck in a rebooting loop if you try to change channel or access the menu?

Today is the first time I have really played with the box and it drove me nuts, you simply have to unplug your sat feed and you can access the menu and change channel. Very strange.

Here is a dump I took today (using NM_HDS2_CMT_1007120293.abs) with the offending channels removed, 7 groups of favourites but you will probably have to rename them from fav 1, fav 2 etc. For some reason it doesn't save that.

Favorites are:
Entertainment
Movies
HD Channels
Factual
Kids
Music
Sports

Not perfect but it's a start.

This is 28.2e Only.

Yes im having the same issue i changed channel to /Sky HD sports 2 then box just went on a loop kept on rebooting. Very annoying i had to quickly press menu then had reset to factory defaults. Hope someone can fix this. Im using the Skybox version

[cyberworld23]

anybody have the latest firmware for this rx?

[kevin1341]

Hi this is the only new one I know of from July.
Hope this helps.
http://www.cardsharing-x.com/index.php?action=dlattach;topic=14297.0;attach=39290

Cheers
Kevin

[teakwondo]

Hi, I have problems to open new Sky Deutschland HD Progs, all other HD Progs are open, only Sky Germany HD not, anybody can pleaseeeeeeee help me?

[steffo78]

Hi. Newcomer reading hard now but if someone has suggestions here they would be appreciated...
I am trying to figure out the cccam on my Openbox s9. I understand this is a kind of cam that can be used with keys,cs and the card reader installed in the receiver. First I use a original Conax card, but it is not working, I guess there are settings somewhere, but I only find the frequency setting for the cam.
Second I would like to use keys for any interesting channels, I have read some guides and probably its me but I do not understand how to config and update the cccam.
I often see that they are written for the dreambox, the folders on the Openbox I cannot find.
I do not use any cs, think that if I get some more channels working this will be more than ok. Especially Dis*****y, not sure if it is possible any more.

[steffo78]

Hi again, can any one please confirm that telnet is not possible on this machine?
Have tried and it says-: Error Number: 10061
The requested connection has been refused by the remote host.

Might be my router on the network but I can connect to other clients with telnet.

[serg1791]

i asked similar question on another forum:

Q.can not make it work, I tried DCC and Total Comander with no joy.
my router is O2 box2and I use LAN cable.I type in receiver's IP and use "root" as username,password blank...
is anyone else come across similar problems?

 and this is exact answer by one of the V.I.P member:

A.that is not linux or open source

you use usb pens to load software and edite configurations.

a pen or the romote control, no ftp possible

hope it helps 2cz8s9j
 

[baxa_xxx59]

I regret, at me is Openbox S9 HD PVR as. Solomend HD PVR 800, both identical the menu why coding Dre Crypt doesn't work and Ntv+36 too, coding Viaccess

Well all packages on Hotbird 13 works very well

[steffo78]

Any one has Dump with working decoding to share? It would make my day. Does not seem like I am getting this, there is no place to put the keyfiles. Well yesterday I got the motorized dish woirking so now I can reach 1W to 28E, also receiving BBC HD which is why I bought the little monster at 150cm... very happy with that and the receivers tuner.

[serg1791]

Any one has Dump with working decoding to share? It would make my day. Does not seem like I am getting this, there is no place to put the keyfiles. Well yesterday I got the motorized dish woirking so now I can reach 1W to 28E, also receiving BBC HD which is why I bought the little monster at 150cm... very happy with that and the receivers tuner.

get c-lines from any cs server,they will send you cccam.cfg file,open it with notepad leave just c-lines,delete the rest,save it

then copy it to USB ,isert USB drive into usb port on your stb,then

menu-NETWORK LOCAL SETTING-CCCAM PLUG SETTINGS-UPDATE FILES BY USB-CCCAM.CFG OK-UPDATE(yellow button).

then you have to activate your accounts

menu-NETWORK LOCAL SETTING -CCCAM PLUG SETTINGS-MANAGE CONFG FILES-CCCAM.CFG-ACTIVATE(green button)-exit-exit-NETWORK LOCAL SETTINGS OK-make sure DHCP ON then click apply-exit-exsit-exsit



now reboot your stb

[baxa_xxx59]

serg1791 As about Dre Crypt

[serg1791]

Dre Crypt - a proprietary system of signal encoding used by Russian operator "Tricolor TV". In common parlance ispulzuyutsya as an abbreviation Z-Crypt (aka Dre-Crypt, DRECrypt).

To receive a signal Tricolor TV requires a receiver with a built-in access DRE-Crypt or receiver with a special slot for access module (Common Interface - CI) and the access module DRE-CRYPT with the smart card.

Receivers with built-in access DRE-Crypt:
• Digiraum Electronics DRE-4000
• Digiraum Electronics DRE-5000
• GS DRE-7300

[baxa_xxx59]

I have understood you and still there is Platform HD on 9 degrees Russian package. I having a kind works sharing on these codings on Solomend HD PVR 800