Firmware Clarke Tech 5000 HD Combo Plus

[antox]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 225p for Clarke Tech 5000 HD Combo Plus

- Amendments to the mode of the engine to pop-up messages (dish moving to NSFW)
- CanalDigitaal AU<- Holland
- Fix smartcard reading

Nor has the Italian language in the menu

FW is not the usual team, so do not say "official"

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
http://hotfile.com/dl/42727797/86ece10/F16_225p.rar.html

[kargo.25]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 226p for Clarke Tech 5000 HD Combo Plus

-Fixed sending repeated commands Diseq
-Amendments to the Static IP mode
-Fixed Loop Out.Rabotaet work, if the thermometer is not included
-Added support for Cyrillic file names and folders via STBdaemon

Not has the Italian language in the menu

FW is not the usual team, so do not say "official"

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!


F16_226p.rar.html

[kargo.25]

1.patched:
- C*a*n*a*l*S*a*t + *B*i*S*T*V ( note: only model SD TV )

2.f_i_x_e_d support:

- T*N*T*S*a*t (

+++Yabbervox++

[kargo.25]

New Original fw 228 for C-Tech 5000-Combo Plus

release note

fixed :

- timeshift problem fixed

features:

- added extra functions in Datatransfer (more Details coming soon)

[kargo.25]

EMU Firmware F16 for C-Tech HD 5000C plus
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 232p for Clarke Tech 5000 HD Combo Plus

- Being tested to operate the exchange in a series of maps 52y reader receiver, as well as in multikas DRE CAM mode is added for decoding lightweight 5 channel Tricolor (First, Russia, NTV, Sports, News), in fact it is not used when you view them. The regime officially turned provider for non-recommended equipment for the action the draw and will not last forever ....
- Fix multikas VIA CAM to work with Kinoreysami 1,2,3 c maps NTV + in reader
- Auto resolution - it is now possible to disable apskeyler receiver, if apskeyler telecom cooler!!
- Small pleasant Revised

Not has the Italian language in the menu!

Code:

NOTE: FW is not the usual team, so do not say "official" Not being official, is at your own risk installing this firmware!



1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

[labud]

Latest Clarke-Tech (5000/5000C) Firmware
F16 New Firmware 234p for Clarke Tech 5000 HD Combo Plus

- Added support for DRE card mode multi protocol RS232
- Output BISS (CAID = 2600) in the playback menu - assigning workers RDA yellow button
- Activation ordered Kinoreysov 1, 2, 3 is now available in Reader
- Further development of ergonomics and translation of some created from scratch
- In the menu range is reduced inertia of the engine stop mode continuous movement after releasing the button, left and right on the remote
has a status - alfa

Not has the Italian language in the menu!

NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

[kargo.25]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 237p for Clarke Tech 5000 HD Combo Plus

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

[antox]

- T*N*T support- B*u*l*s*a*t update O*R*F/A*u*s*t*r*i*a*s*a*t support
 
+++by Yabbervox+++

[kargo.25]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 250pSE(second edition)for Clarke Tech 5000 HD Combo Plus

[kargo.25]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 251p for Clarke Tech 5000 HD Combo Plus

[kargo.25]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 252p for Clarke Tech 5000 HD Combo Plus

[antox]

New Firmware F16_253p for Clarke Tech 5000 HD Combo Plus
Changes:
- Added algorithm overkripta Provider: 4AE1: 11, 4AE1: 15, 4AE1: 14, allows you to use to view the card reader receiver, not the oven module. Oh, and for the owners of original GS8300 is also a solution to the problem view.
- Fixed bug PVR, which are manifested in the use of Timer Lead Time as a distortion of the expanded information from TV Guide.