Author Topic: Sky ITALIA nds3 problem ...! (Read 2887 times)

babylover2009 · « **on:** January 08, 2010, 12:12:51 PM »

Hi all my friends ...
I have buy in Italy at 6 January 2010 a Sky Italia full NDS3...can someone help me how to make cardsharing with this card...i have read that this card can be read and share with OSCAM+CCCAM...can someone help me with any manual or tutorial of versions of oscam and version of cccam used to share that card...
i have a server with ubuntu 9.10 and a smargo cardreader ...
for the momoent in that server i have a tring card local that is shared with NEWCS 1.67RC1 + CCCAM 2.1.3 AND IS WORKING GREAT.

please help me ...

antox · « **Reply #1 on:** January 08, 2010, 12:21:53 PM »

which image is in your dreambox???and card sky

# Sky Italia (0919:0000)
# Sky Italia (093B:0000)

Code: You are not allowed to view links. Register or Login

Guys, this is a step by step guide how to get your SkyIT NDS3 093b card back up and running. With Ubuntu or Debian and with a Smargo Reader.

Some linux skills and CCcam experience is needed here as I am not going in detail on how to use these.

In Ubuntu / Debian :

1. Stop your CCcam server session and leave it down.

2. Make sure your CCcam is not setup running at system startup, OSCAM needs to run first.

3. Make sure your CCcam is not trying to open your Smargo usb port. Place a # in front of your CCcam line where you activate your reader.

4. Download the latest version of OSCAM. Currently I have tested with 0.99.4.528svn-i686

5. Copy and set chmod 755 rights the above oscam binary file. I placed file in /usr/local/bin/

6. In /usr/local/etc/ create 3 files as follows: oscam.conf oscam.server oscam.user with the below data within it:

for oscam.conf:

Quote:

[global]
nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000
for oscam.server:

Quote:

[reader]
Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093B
BoxID = place your boxID here, I have not tested without it
for oscam.user:

Quote:

[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0

7. Now Simply shutdown your linux server. Power off motherboard so SMARGO reader has no power then turn server back on.

8. When server is up, run oscam from /usr/local/bin/ like this: ./oscamfile -b

9. Check file located in /var/log/oscam.log this should give you good news.

10. Place N line in CCcam.cfg

Quote:
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
11. Run your CCcam and test.

cfg.for smargo.

Code: You are not allowed to view links. Register or Login

oscam.server

Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093B
BoxID = xx xx xx xx----vas box Id od 8 cifri

babylover2009 · « **Reply #2 on:** January 08, 2010, 03:19:09 PM »

(pozz) Good post
I dont insert SKY IT NDS3 in dreambox i insert CARD in smargo/ubuntu 9.10 ... if my cardid is CAID = 0919 in config that you send me i have to change only 093B with 0919 ?
best regards
baby

News:

Author Topic: Sky ITALIA nds3 problem ...! (Read 2887 times)

babylover2009

Sky ITALIA nds3 problem ...!

antox

Re: Sky ITALIA nds3 problem ...!

babylover2009

Re: Sky ITALIA nds3 problem ...!