AAF Weihnachtsimage für Topfield HDPVR7700


Beschreibung:
AAF Weihnachtsimage für Topfield HDPVR7700

Basis Team Ducktales Build 0.5.1
(letztes TDT release vor Open Source Projekt)

Changelog seit letzten oeffentlichen AAF Release:

TDT:
+ Fix: fixed the issue with the second recording starting while playback is
active
+ Fix: improved the interactions between recording and playback (e.g.
timeshift)
+ Change: separated kernel modules and updated the Player driver (stream
decoder)
+ Feature: set default skin to noGfx
DO NOT USE "keepsettings" when updating from previous releases.
Otherwise enigma2 will crash in an endless loop.
+ Feature: introduced evremote2 to allow support for additional RC ****
+ Feature: added support for .m2ts files
+ Change: changed the *** mapping of the CutListEditor plugin. Now it
should be possible to control it properly (though there are
still some issues)
+ Fix: improved playback of mp4
+ Fix: added message sequences used by the original firmware to the
communication with the frontpanel (possibly fixing the 'battery bug')

AAF:
+ AAF Panel Update
+ SetStartChannel Plugin
+ Neue Senderliste
+ MediaCenter v09227

Danke an Team Ducktales für das super Basis Image und alle die dieses Image ermoeglicht und getestet haben.

Bekannte Probleme:
- Manchmal nach dem Zappen kein Ton (Ton oder Kanal umschalten hilft)
- Nach längerem Betrieb kann es vorkommen das der Ton stottert(umschalten hilft)
- CIFS funktioniert nicht
- Lautstärke wird beim herunterfahren nicht gespeichert
- Nach der Ersteinrichtung kann sich die Box aufhängen - nach Neustart alles in Ordnung

55 MB
You are not allowed to view links. Register or Login

10.01.2010 TDT Enigma2 0.4.6 TF7700HDPVR fix


Changes at this release

  * Tuxtxt have been times, execute and repackaged.
  * Thus, the teletext should go again.


################################################## ######## ## Team Ducktales' Enigma2 image for the TF7700HDPVR ## ## Release 0.4.6 ## ################################################## ########The provided image is based on the Linux operating system and includesthe Enigma2 PVR application. Please read this document carefully beforeinstalling the image.New features and bugfixes---------------------------------------This release is based on the 0.4.5 and contains backported bugfixes from thereleases 0.5.0 and 0.5.1 (see below). That is, the release is based on the oldstream decoder drivers which seem to be more stable and do not have some issuesobserved with the 0.5.x releases.+ Feature: added displaying HDD status in VFD+ Fix: improved a workaround to avoid freezes (especially on HD channels)+ Fix: fixed seeking from current position in .avi files and user audio delay in seeking+ Fix: enabled seeking in mp4 filesUnsupported features and known problems---------------------------------------- The only supported tuner type is DVB-S2 CX24116/CX24118.- Temporary loss of sync if timeshift is unpaused within 6-7 seconds afterits activation.Workaround: do not unpause timeshift in the first 8 seconds.- Rewind works only at a constant speed.- With "AC3 downmix on" there is no sound on optical when AC3 stream isselected. With "AC3 downmix off" the system might freeze when zapping tochannels with AC3.- There are problems with switching between different satelleites via Diseqc.It takes several seconds to tune to a channel on another satellite.- Simultaneous video output to HDMI and Scart (RGB) is not supported.- Sporadic hangers when zapping during an active HDTV recording- Some USB sticks are not recognized so that the Enigma2 installationdoes not work. Reformatting the stick with FAT32 might help.IMPORTANT:When reporting problems please provide console logs documenting the systembehaviour.DISCLAIMER----------The software is provided 'as is' without warranty of any kind.Please consider that you may lose manufacturer's warranty when installingthis image.This is a beta image. That is some functions may not be available or bebuggy (causing crashes/freezes or loss of data).The installation of the Enigma2 image formats (ext2) the internal harddiskunless installation on a USB HDD is selected.ALL FILES ON THE HARDDRIVE WILL BE LOST. When reverting the installationon the internal HDD to the original Topfield firmware all Enigma2 fileswill be lost too.Installation instructions-------------------------You will need either a USB stick or a USB harddrive with FAT32 filesystem.- Copy the files Enigma_Installer.tfd, uImage, rootfs.tar.gz andEngima_Installer.ini to the USB device. Please read the instructionsin Engima_Installer.ini on how to modify the installation process.- Attach the drive to the USB slot.- Open the Topfield firmware update menu and select the image fileEnigma_Installer.tfd on the USB drive.- Start the firmware update from USB. This part is very quick.Restart the receiver when the display shows the blinking END- After about 6-7 minutes the installation should be finished.DO NOT REMOVE THE USB DEVICE UNTIL the INSTALLATION HAS FINISHED orTHE INSTALLER REQUESTS TO DETACH THE USB DEVICE.- When installing to a USB HDD (option usbhdd in Enigma_Installer.tfd)the installer will ask you to detach the initial USB device and toattach a USB HDD to install to.During the installation the VFD shows the current installation step anderror messages (if any):"9 USB STCK" mounting USB stick"STCK DETACH" waiting for USB device to be detached (USB HDD installation)"HDD ATTACH" waiting for USB HDD to be attached (USB HDD installation)"8 HDD PART" partitioning HDD"7 HDD FMT" formatting HDD (root fs)"6 HDD FMT" formatting HDD (data fs)"5 HDD SWAP" creating swap"4 ROOT FS" installing root file system"3 LOADER" flashing U-Boot settings"2 KERNEL" flashing kernel"1 FSCK" checking file system"0 REBOOT" rebooting within 2 secondsWhen installing to a USB HDD the contents of the internal HDD remain unchanged.IMPORTANT: When using the option "keepsettings" in Engima_Installer.ini thenewer settings (incl. keymap.xml updates) will not be installed.It is recommended to attach a cable to the serial port and log the output in aterminal program (e.g. TeraTerm, Putty) during the installation and the firststart. Serial port settings: 115200, 8, N, 1.The USB filesystem should be writable to prevent infinite installation loop.(The file uImage is renamed to avoid the infinite loop.)The first start usually takes approximately 3 minutes due to creation ofdevice nodes.To uninstall Enigma2, copy your favorite Topfield firmware on your stick andrename it to "topfield.tfd" (don't forget to rename uImage_ if necessary). Theinstaller will flash the firmware and reboot the Toppy. There have been reportsthat the PVR appears to be dead for about 5 minutes until the picture comes onthe TV screen. So please be patient. Enigma2 can also be removed by flashing aregular Topfield firmware image using standard tools like TFD-Down or VegaPackvia the serial interface.First start-----------On the first start the Enigma2 interactively configures the video output to beused. The following options are available:- Component- HDMI- Scart- HDMI-PCEach connection type is switched on for 30 seconds. The VFD displays theconnection type which is currently active. You can either wait until theconnection type you want is displayed and your TV shows a picture or youcan select the connection type with Up and Down buttons on the remote control.Confirm the desired connection type with the Ok button. After that you canproceed with the configuration supported by the configuration wizard.The image contains a default channel table. If you want to replace it you canperform a channel scan later.Network configuration---------------------The U-Boot settings contain the following configuration by default:MAC address 00:3e:9e:11:22:33IP address 192.168.178.100That is after booting the image you can login via telnet if your computer is inthe same subnet.These values are set up by the U-Boot. You can change the valuesin Enigma2 menu "Settings/System/Network.../Adapter settings".Playback ****-------------Play - shows the file listPause - pauses playback or activates timeshiftStop - stops playback or timeshiftRecord - opens the record dialog for starting stopping recordingYellow - pause/unpause playbackGreen - continue playbackRed - jump to the beginningBlue - jump to the next bookmark1/3 jump 15 seconds backwards/forwards (configurable in the settings menu)4/6 jump 60 seconds backwards/forwards (configurable in the settings menu)7/9 jump 5 minutes backwards/forwards (configurable in the settings menu)Full *** map can be found in the file /usr/local/share/enigma2/keymap.xml.Team Ducktales
http://www.file-upload.net/download-2147406/tdt_enigma2_4_tf7700hdpvr_0_4_6_fix.zip.html

 Neutrino Image for Topfield7700
18.01.10

Topfield 7700 HD git 170

http://www.speedyshare.com/files/20426558/tf7700_git_171_neutrino_release_incl_kernel.tar.gz